Message
|
Details
|
Solution
|
Too many clients
|
The limit on the number of video server connections has been exceeded.
|
Access to the camera server is apparently overcrowded. Try reconnecting later.
|
Can't connect, version mismatched
|
The camera server is a different version.
|
Clear the Web browser cache.
|
Can't connect
|
The viewer cannot connect to the camera control server.
|
There is a coding error in the Web page used for video distribution, or there is a problem on the camera server. Check with the administrator of the video distribution Web page.
|
Couldn't get camera control
|
The limit on the number of people queuing for camera control privileges has been exceeded.
|
Access to the camera server is apparently overcrowded. Wait some time and then try again to acquire control privileges.
|
Camera control is disabled
|
The viewer cannot connect to the camera control server.
|
This is normal operational message indicating that camera control is prohibited by the camera server.
|
Camera is off-line or abnormal
|
The connected camera is switched off or the RS cable is not connected.
|
There is a problem with the camera server (with the camera power supply or the RS cable connection). Check with the administrator of the camera server.
|
Disconnected
|
The connection time limit has expired or the connection was cut due to restart processing on the camera server.
|
Reconnect or reload (refresh) the Web page in your Web browser.
|
