CXDI-50RF

Digital Detectors

CXDI-50RF

Specifications

Static Detector
  Method Flat Panel Detector, Scintillator & Amorphous Silicon (a-Si), RF System Cassette
  Scintillator Csl (CsI: TI)
  Sensor LANMIT (Large Area New-MIS Sensor and TFT)
  Pixel Pitch 160 Microns
  Pixels 2,208 x 2,688 Pixels (Approximately 5.9 Megapixels)
  Imaging Area Automatic Sizing Up to 14 x 17 in (35 x 43 cm)
  Standard Components Sensor Unit, Power Supply
 
Dynamic Detector
  Binning Mode 1 x 1, 2 x 2
  Acquisition Mode Up to 30 fps
  Cooling Active Air Cooling
 
Image Acquisition and Processing
  Image Processing MLT(S) (Static)
Recursive Filters and Multi-Frequency Filters (Dynamic)
  A/D 14-bit
  Grayscale 4,096 Grayscale (12-bit)
  Preview Image Approximately 2-4 Seconds After X-ray Exposure (Radiography Only)
  Full Image Display Approximately 4 Seconds After X-Ray Exposure (Radiography Only)
 
Data Output and Network Connection
  Network Ethernet 10/100/1000 Base T, RJ45 Standard, Wireless Optional
  DICOM DICOM 3.0 Compatible, Print Management Service Class (SCU), Storage Service Class (SCU)
 
Electrical and Environmental
  Voltage AC 100-240V 50/60Hz
  Operating Environment Sensor Unit: 41-95 F (5-35 ÂșC), Humidity 30-75% RH (non-condensing)
 
Physical Characteristics
  Dimensions (W x L x H) 19.4 x 19.8 x 1.0 in (493 x 503 x 26 mm)
(Detector unit only)
  Weight 12.5 lbs (5.7 kg)
     
Specifications are subject to change without notice.