EMAIL THIS PAGE PRINT THIS PAGE

imageRUNNER 7095 Printer

imageRUNNER 7086 / 7095 / 7095P / 7105
Separator

About imageRUNNER 7095 Printer

See Other imageRUNNER 7086 / 7095 / 7095P / 7105
  • Overview
  • Brochures & Manuals
  • Accessories
  • Features
  • Product Configurator
  • Drivers & Software
  • Specifications
  • Supplies
  • Videos

Specifications

Main Unit Specs

Model NameimageRUNNER 7095 Printer
TypeDigital Multifunctional Imaging System
Imaging SystemLaser Dry Electrostatic Transfer
Developing SystemDry Monocomponent Toner Projection
Image Server MemoryStandard 1GB RAM + 40GB HDD
Max Mailboxes Supported100 (Max. Page Capacity: Approximately 20,000 pages)
Printing Resolution1200 x 1200 dpi: UFR II and PostScript
2400 x 600 dpi (interpolated): PCL
Halftone256-Level Grayscale
Letter95 ppm (Letter); 49 ppm (11" x 17")
First Copy Time7 seconds (The first print time may vary, depending on the print driver being used).
Standard Paper Capacity4,150 Sheets
Manual Bypass50-Sheet Stack Bypass
Maximum Paper Capacity7,650 Sheets
Output Sizes
CassetteUp to 11"x17"
BypassUp to 11"x17"
Acceptable Paper Weights
Cassette17 lb. Bond to 110 lb. Index (All Sources)
Warm Up Time6 Minutes or Less
Power Requirements208V, 60Hz, 12A
Dimension57 3/4" x 41 5/8" x 30 7/8"
Weight551 lb. (250kg)

Back to TopSupplies

TonerMagnetic Negative Toner
Estimated Toner Yield47,000 Images @ 6% Coverage

Back to TopAccessories

Paper Supply Options
DescriptionPaper Deck-W1/Paper Deck-X1 (Opt)
Number Of Cassettes1
Paper Capacity3,500 Sheets
Paper SizesPaper Deck-W1: Letter
Paper Deck-X1: Letter-R, Letter, Legal, 11" x 17"
Paper Weights17 lb. Bond to 110 lb. Index
Power SourcePaper Deck-W1/Paper Deck-X1: Directly From Main Unit
DimensionsPaper Deck-W1: 22-1/2" x 12-3/4" x 23"
(570mm x 323mm x 583mm)
Paper Deck-X1: 22-5/8" x 23-3/8" x 24-1/2"
(574.5mm x 593mm x 621mm)
WeightPaper Deck-W1: 90.4 lb. (41kg)
Paper Deck-X1: 101 lb. (46kg)
DescriptionPerfect Binder-A1
Paper CapacityCover Sheet Capacity:
Upper Tray: 200 sheets (20 lb. bond)

Lower Tray: 200 sheets (20 lb. bond)

Output Tray Capacity: 3.94" (100mm) (equivalent to 10 books of 100 pages of 17 lb. bond)

Glue Capacity: Glue-A1 (33 lb.) (15kg): Approximately 1,000,000 pages
Glue-A2 (11 lb.) (5kg): Approximately 200,000 pages

Glue Warm Up Time: 380 seconds or less
Paper SizesBooklet Finish Size:
Width: 7-1/8" to 11-1/4"

(after 3-direction cutting): Length: 5-5/8" to 8-1/4"

Cutting Method: Stack rotation 3-direction or 1-direction (foredge) cut

Cover Sheet Sizes:
Width: 10-1/8" to 13"

Length: 14-3/8" to 19-1/4"
(11" x 17", 12" x 18", 13" x 19")
Paper WeightsBooklet Thickness: 10 to 200 sheets (17 to 24 lb. bond)
10 to 150 sheets (24 to 28 lb. bond)
10 sheets (28 to 110 lb. index)

Cover Sheet Weight: 24 lb. to 158 lb. index (from Document Insertion Unit)
Output Options
Finishers Output Trays
DescriptionFinisher-V1/Saddle Finisher-V2 (Opt)
Paper WeightsFinisher-V1: 17 lb. Bond to 110 lb. Index
Saddle Finisher-V2: 17 lb. Bond to 110 lb. Index
Paper Size11" x 17", Legal, Letter, Letter-R, Statement-R, Executive
Number Of Trays2/3
Top Tray3,000 Sheets
Lower Tray2,000 Sheets
Saddle Stitch Tray30 Booklets or Limitless
Staple Capacity100 Sheets (Letter, Executive) 50 Sheets (11" x 17", Legal, Letter-R)
Staple PositionsCorner Stapling, Double Stapling
Hole PunchProfessional Puncher-A1 (Opt)
Type: External In-Line Punch Unit
Hole-Punching Method: Press Punch Unit
Acceptable Punch Paper Weight: 20 lb. Bond to 110 lb. Index
Acceptable Punch Paper Size: Letter
Punch Speed: Up to 105 ppm (Depending on speed of main unit)

Puncher Unit-V1 (Opt.)
Type: Internal Punch Unit
Hole-Punching Method: Press Punch System
Acceptable Punch Paper Weight: 17 lb. Bond to 110 lb. Index
Acceptable Punch Paper Size Two Holes: Legal, Letter-R; Three Holes: 11" x 17", Letter
Punch Speed: Up to 105 ppm (Depending on speed of main unit)
Paper Sizes11" x 17", Legal, Letter-R
Stapling Capacity20 Sheets (80 Pages)
Fold TypeV-Folding Standard
Power SourceDirectly From Main Unit or 208V, 60Hz, 12A
DimensionsFinisher-V1: 46-1/2" x 31-1/2" x 31-1/4" (1180mm x 800mm x 792mm)
Saddle Finisher-V2: 46-1/2" x 31-1/2" x 31-1/4" (1180mm x 800mm x 792mm)
WeightFinisher-V1: 278 lb. (126kg)
Saddle Finisher-V2: 392 lb. (178kg)
Booklet Trimmers
DescriptionBooklet Trimmer-B1 (for Saddle Finisher- V2)
Sheet CapacityMaximum Trimmable Sheets: 40 sheets (20 lb. bond)
38 sheets (20 lb. bond) + 2 sheets (158 lb. index)

Possible Trimming Size: 11" x 17", LGL, LTRR

Trimmer Waste Tray Capacity: 1,500 sheets of trimmed strip

Output Tray Capacity: 30 booklets

Booklet Trimming Cutting Method: Upper knife reciprocating fore-edge trimmer with delivery tray
Document Inserters
DescriptionDocument Insertion Unit-C1 (Opt)
Paper Weight17 lb. Bond to 158 lb. Index
Paper SizesUpper Tray: Letter, Letter-R, Executive; Lower Tray: 11" x 17", Legal, Letter, Letter-R, Executive
Feeder CapacityUpper Tray: 200 Sheets; Lower Tray: 200 Sheets
Paper Folding
DescriptionPaper Folding Unit-D1 (Opt)
Paper Weight17 lb. Bond to 20 lb. Bond
Paper Sizes11" x 17"
Fold TypeZ-Fold
Print Board
DescriptionCanon Multi-PDL Printer Kit-H1 (Opt)
ProcessorDual Canon Custom Processors
Standard Memory1 GB -- Shared
Maximum Memory40 GB -- Shared
PDL SupportPCL 5e, PCL 6, PostScript® 3 Emulation, UFR II
Postscript FontsPostScript 3 Emulation
PCL FontsPCL 5e, PCL 6
Interface ConnectionsStandard: 10/100Base-TX (RJ-45), USB 2.0 High Speed
Network OS: Windows® 98/Me/2000/XP Windows NT® 4.0 Windows Server 2003 (TCP/IP) Solaris 1.1x, 2.5x or Later Macintosh® OS 8.0 or Later (PPD) Novell® NetWare® v3.2, 4.1, 4.11, 4.2, 5, 5.1, 6, 6.5 (IPX/SPX)
DescriptionimagePASS-S1 Print Controller (Opt)
ProcessorIntel® Celeron® D 2.8GHz
Standard Memory256MB
Hard Disk80GB HDD
PDL SupportAdobe® PostScript 3, PCL 5e, PCL 6
Postscript FontsPostScript 3
PCL FontsPCL 5e, PCL 6
Interface ConnectionsStandard: 10Base-T/100Base-TX/ 1000Base-T (RJ-45) (RJ-45), USB 2.0 High Speed
Network OS: Windows 98/Me/2000/XP Windows Server 2003 (TCP/IP) Solaris 8 or Later Sun OS 4.1.3 or Later Macintosh OS 9.2, OSX (10.2.4) or Later Novell NetWare 4.2, 5.1, 6.5 (IPX/SPX)

Other Accessories

  • Cassette-AB1
  • Tab Feeding Attachment-A1
  • Document Tray-L1
  • Braille Label Kit-A1
  • Control Card Reader-D1
  • Control Card Sets
  • Web Access Software-C1
  • Remote Operator's Software Kit-A1
  • Security Expansion Board-F1
  • Expansion Bus-D1
  • imageRUNNER Security Kit-A2
  • Secure Watermark Kit-A1
  • Barcode Printing Kit-A1
  • Finisher Option Power Supply Unit-R1
  • Stacker Dolly-A1
  • Perfect Binder-A1
  • Punch Tools
  • Hot Folder for imagePASS-S1
  • Impose for imagePASS-S1
Back to Top