imagePRESS 1125+

imagePRESS 1125+
Separator

About imagePRESS 1125+


Accessories

Application Software

Canon Encrypted Secure Print Software-C1
Canon Encrypted Secure Print Software-C1
Encrypts print data sent from a computer to an imageRUNNER devices. Allows for stronger security for print data by helping to prevent confidential information from being seen by unauthorized individuals.
Compatible Products >
Canon HDD Data Erase Kit-A1
Canon HDD Data Erase Kit-A1
Encrypts image data before writing to the HDD. Provides protection for both temporary and permanent data equipped with Canon MFP Security Chip 1.00 which is Common Criteria Certified.
Compatible Products >

Back to Top Attachments

Braille Label Kit-E1
Braille Label Kit-E1
The Braille Label Kit-E1 contains transparent Braille labels that affix to each hard key on the control panel except for the numeric keys. This is due to the conventional layout of the numeric keypad, which already has a protruded dot on the "five key," providing familiar entry for the visually impaired. This kit provides visually impaired users with improved access to copy and fax functions.
Compatible Products >
Braille Label Kit-E1
Braille Label Kit-E1
The Braille Label Kit-E1 contains transparent Braille labels that affix to each hard key on the control panel except for the numeric keys. This is due to the conventional layout of the numeric keypad, which already has a protruded dot on the "five key," providing familiar entry for the visually impaired. This kit provides visually impaired users with improved access to copy and fax functions.

The Braille Label Kit-E1 can be used with imageRUNNER devices, as well as some Color Laser Copiers, NP Copier products, and LASER CLASS Facsimile.

Compatible Products >
Convenience Stapler-A1
Convenience Stapler-A1
An offline stapling unit that can be used to re-staple hard copy originals that had been separated prior to scanning for copying or sending or act as an offline stapling unit for copy, print, or fax output. Up to 50-sheet stapling is supported.
Compatible Products >

Back to Top Document feeders / Accessories

Canon ADF Access Handle-A1
Canon ADF Access Handle-A1
A convenient handle that can be used to allow operators to open and/or close the device Document Feeder from a seated position (such as in a wheelchair).
Compatible Products >
SDD Two Knife Trimmer and Squarefold set
SDD Two Knife Trimmer and Squarefold set
Item Code: 6357B001AA
The SDD Square Fold Module and 2-Side Trimmer finishing solution works in-line with Canon imagePRESS production printers to create a complete full-bleed printing and booklet making system that is perfect for a wide range of on-demand applications.

Compatible with Canon Trimmer-D1 from Canon's Saddle Stitcher.
Compatible Products >

Back to Top Paper supply options / Accessories

Swift UV Roller Coater
Swift UV Roller Coater
The Swift UV Coater finishing solution works with Canon's imagePRESS digital presses to extend the life of prints and add vibrancy. This solution is available as an off-line solution or as an in-line solution using a Canon exclusive in-line bridge.
Compatible Products >

Back to Top Printer board / Controller

IPR SERVER J100
IPR SERVER J100
Compatible Products >
IPR SERVER J200
IPR SERVER J200
Compatible Products >

Back to Top Sorters / Finishers / Accessories

Canon Two-Knife Booklet Trimmer-A1
Canon Two-Knife Booklet Trimmer-A1
Canon addresses a top request of the print marketplace with the introduction of the Two-Knife Trimmer-A1 for its imagePRESS digital presses. This new accessory integrates seamlessly with the Booklet Trimmer and the Saddle Finisher to enable 3-sided trimming of full-bleed, saddle-stitched booklets.The capabilities of this finishing accessory will allow your business to completely produce and finish a greater variety of jobs in-line without operator intervention.
Compatible Products >
Canon Document Insertion Unit-F1
Canon Document Insertion Unit-F1
Document Insertion Unit-F1 can insert pre-printed cover sheets or insert sheets for finishing. The upper and lower trays each can hold up to 200 sheets of plain paper or tabbed index stock, with weights ranging from 14 lb. Bond to 110 lb. Index in sizes up to 13" x 19.2".
Compatible Products >
Canon Saddle Finisher-AF2
Canon Saddle Finisher-AF2
For professional booklet making, use Saddle Finisher-AF2 with all the same features plus saddle finishing up to 25-sheets (20lb bond), for 100 page booklets.
Compatible Products >
Canon Finisher-AF1
Canon Finisher-AF1
Finisher-AF1 provides stack and staple finishing with a capacity of 5000 sheets. Stapling up to 100 sheets (Letter), and 2/3 hole punching with Optional Puncher Unit-BQ1.
Compatible Products >
Canon Puncher Unit-BB1
Canon Puncher Unit-BB1
Enables simple 2-3 hole punching of 16 lb. Bond to 110 lb. Index (60gsm to 200gsm) media.
Compatible Products >
Canon High Capacity Stacker-E1
Canon High Capacity Stacker-E1
High Capacity Stacker-E1 allows maximum productivity. A continuous-run stacker, you can stack a job on one side of the stacker and unload the other side while the press is still running. Maximum capacity of 10,000 sheets (20lb bond, Letter). A convenient top exit proof tray offers a 1,000-sheet capacity for non-collated output.
Compatible Products >
Canon Perfect Binder-C1
Canon Perfect Binder-C1
This provides high-quality document binding for up to 200 sheets (20lb bond), with a wraparound cover. To give books a professional look, the perfect binder uses hot-glue technology and a three-sided trimmer for accurately trimmed books.
Compatible Products >
Canon Booklet Trimmer-D1
Canon Booklet Trimmer-D1
The Booklet Trimmer is an option, which attaches to the Saddle Finisher-AJ2 to trim the open end of booklet sets for a flush, professional edge.
Compatible Products >
PRO.PUNCHER-B1 W/IF UNIT-A1
PRO.PUNCHER-B1 W/IF UNIT-A1
Numerous die patterns avaiable for robust document preparation in-line.
Compatible Products >