The base of the VB-C60 is equipped with built-in terminals for connection to various external devices.
1. Power Connection Socket
Connect the camera to an external power supply or AC adapter (not included). The terminal accepts 12 volts DC power or 24 volts AC power.
2. 10/100 Base-T LAN Connector
Connect the camera to the network with an RJ-45 cable. The VB-C300 integrates the PoE (Power over Ethernet) functionality, so the power can be supplied to the camera via the LAN cable from a PoE Power Injector or an IEEE 802.3af-compliant PoE midspan or switch.
3. Audio Input Terminal
Use this terminal to connect a microphone to the camera. The Administrator can then monitor the audio at the camera site from a remote location.
4. Line Out Terminal
Use this terminal to connect a speaker to the camera. Audio can be sent to the camera by the Administrator from a remote location.
5. External Device I/O Terminals
The camera has two input and one output terminals for the external devices, such as sensors or alarms.
With all this flexibility, you can get connected and get the VB-C60 working for you right away.