BU-45H

  • Pan-Tilt Section
  • Camera & Lens

    Specifications

    Pan-Tilt Section:
    Operation Angle Panning: 340 degrees, tilting + 30 degrees, -50 degrees.
    Operation Speed Panning: 0.5° ~ 25°/s, Tilting: 0.3° ~ 20°/s
    Repeatability Within +/- 10 degrees
    Wiper Built-in Electric Wiper
    Washer Connector on Pedestal Section for Third Party Washer Unit
    MIC input Yes, pedestal section
    Connector Receptacle DC terminal, SDI out, VBS out, SYNC in, AUX out,
    Control (RS-422)
    Video output HD-SDI/SD-SDI Embedded audio output
    BNC1Line (receptacle section)
    SD Composite (NTSC/PAL) output
    BNC1 Line (receptacle section)
    GEN LOCK input BNC 1 Line (receptacle section) (3value/BB)
    Operating temperature Ambient - 15 ~ 40°C/20~90% (Without being dew condensation)
    Wind Velocity-Resistance 0~25m/s Normal operation
    25 ~ 40m/s Operation possible
    40 ~ 60m/s Non destruction
    Noise NC55 below
    Power Source

    DC12V

    Dustproof waterproof efficiency IP45
    Mass Approx. 17kg




    Camera & Lens:
    Pick-Up Device Pixel Count 1/3" HD 3 CCD, total of ~ 1.67 million pixels per CCD
    Range of Focal Length 4.5 ~ 90mm F1.6 ~ 3.5
    8.25 ~ 165mm (2/3" conversion)
    Zoom Ratio 20x Optical zoom
    Focusing system AUTO, Manual
    IRIS AUTO, Manual
    Shutter Speed 1/4, 1/15, 1/60, 1/100, 1/500
    Gain AUTO, 0dB, 6dB, 12dB, 8dB, 36dB
    White balance AUTO, Set
    Picture quality adjustment Master pedestal, R-gain and B-gain
    GEN LOCK
    Phase adjustment
    Adjustment range approximately ±0.4H
    Optical filter CLEAR, 1/6ND, 1/32ND (Remote Control)