DT-50

Integrability-Security-Reliability

Canobeam DT-50 is designed to work with IT system administrators as a complete solution that includes scalability, performance monitoring, security, and flexible integration into the network. Canobeam is not dependent on a protocol outside the layer physical of the network, so it can be implemented in the same manner as fiber optic cable. The Canobeam includes Canobeam Management Software as a standard configuration that monitors the status of the Canobeam DT-50 on a remote PC. And, the point-to-point wireless optical beam transmissions of the Canobeam DT-50 are highly secure, "untappable" connections. Canobeam DT-50 works well in areas where there is high radio or other EMR interference. There is no necessity of radio frequency permits, allocations, or licenses.


Cost Control

Canobeam DT-50 has operating and initial costs that are, in most applications, much lower than those associated with the installation of fiber-optic cables, or monthly paid services such as DS-3, OC-3 or OC-12.


The 3R

Where there is no direct line of sight between the two proposed points of communication, or where the distance required exceeds 2 KM, multiple Canobeam units can be placed to relay the signal from its point of origin to its destination. The 3R function, (Re-generating, Re-timing, Re-shaping) normalizes the signal waveform with FastEthernet, FDDI, and ATM transmissions, so there is no deterioration of the signal during relay transmission.


Autotracking

Building sway, platform movement, wind, and other factors can cause any installed device to vary from its original position. Canobeam DT-50 protects the data stream from interruption by compensating for any variation of up to 4 degrees. Devices without this feature experience serious limitations in how they can be implemented.