Overview

The R-F10 Full Auto Refractor simplifies the standard measurement procedure to an unprecedented degree--all operations in just one step.  With a press of the start button, the R-F10 automatically completes the entire series of steps for both eyes: alignment, measurement, and printout.  This process promises not only to reduce overall exam time, but in combination with improved measurement technology, will raise the accuracy and reliability of eye exams.

Features
Easier, more comfortable operation
The R-F10 replaces the conventional joystick with a trackball and roller tandem that eases hand movement during manual alignment.  Once the examinee's pupil is visible in the monitor, press the start button to initiate--and complete--refraction measurement.

More efficient exam procedures
The measurement head covers an exceptional wide area, thus speeding up the auto-alignment process, and the built-in printer delivers your printout faster than ever.

Motorized chin rest
A motorized chin rest offers easy adjustment of the unit when beginning the eye examination.

Ergonomic centralized control keys
The layout of the operation panel makes the unit easy to use from either a seated or standing position.  For your convenience, the control keys for each main function are grouped together.

Optional Accessories

Increased measurement reliability
By simplifying operation, Canon's fully automated measurement technology, takes on a greater share of the workload and increases the reliability of measurement data. What's more, the unit's monitor employs a deep focal point, which makes it easier for you to tell whether an examinee's eyelashes are obstructing measurement.

Printing paper
Chin rest paper
Motorized table
Printer cable

For additional information, download the R-F10 Full Auto Refractor brochure.

Back to Top

Specifications

Refractometry

Sphere (SPH)

-30 to + 22D when VD = 12 mm (Increments: 0.12D and 0.25D)

Cylinder (CYL)

0 to +/-10D (Increments: 0.12D and 0.25D)

Axis (AX)

1 degree to 180 degree

Pupil distance (PD)

Maximum 85 mm (Increments: 1 mm)

Vertex distance (VD)

0/12/13.5 mm

Cylinder form

-, +, +/-

Minimum pupil size

2.5 mm diameter

General

Measurement values

10 for each eye

Standard value

1 for each eye

Pupil distance

1

Printing

Thermal line printer (Prints measurements, date, time, serial number, and eye diagram.)

Data output

RS232C (The instrument to be connected must comply with the IEC601-1 standard.)

Electrical and Environmental

Power saving system

Monitor, lamp, and motor go into Sleep mode when operation is discontinued for approximately 5 minutes.

Power supply

110/120V, 220/240V, 230V
50/60Hz, 0.4 – 0.8A

Physical Dimensions

Dimensions (W x L x H)

Approximately 11 inches x 20.5 inches x 18.5 inches
(280 mm x 520 mm x 470 mm)

Weight

Approximately 46 pounds (21 kg)

Back to Top