vbbkrsv100.exe

1.0

4.62 MB

04/25/2013

Backup Tool/Restore Tool is a tool for backing up or restoring settings for network camera VB-C300.

Windows 2000 Professional (SP4) / Internet Explorer 6.0 (SP1)
Windows XP (SP1a) / Internet Explorer 6.0 (SP1)
Windows XP (SP2) / Internet Explorer 6.0 (SP2), 7.0
Windows Server 2003 Standard Edition / Internet Explorer 6.0
Windows Server 2003 Standard Edition (SP1) / Internet Explorer 6.0 (SP1), 7.0
Windows Server 2003 Standard Edition (SP2) / Internet Explorer 6.0 (SP2), 7.0
Windows Server 2003 R2 Standard Edition / Internet Explorer 6.0 (SP1), 7.0
Windows Server 2003 R2 Standard Edition (SP2) / Internet Explorer 6.0 (SP2), 7.0
Windows Vista (Home Basic, Home Premium, Business, Enterprise, Ultimate) /
Internet Explorer 7.0

 - Don't unplug or turn off the camera during the backup/restore process, or it might cause damage to the camera.
 - Don't run Backup Tool/Restore Tool at the same time on multiple two or more PCs, which are connected to the same network. Or it might cause damage to the cameras.
 - Quit all other applications before using Backup Tool and Restore Tool, and make sure the network camera is disconnected from other software, such as NC viewers and VK-64/VK-16 viewers. 
 - Use the tool in a stable network environment, such as an intranet.

<Restore Tool>
 - When the administrator password, authorized user passwords and user lists are restored, those set values return to the one that were taken when the backup file was created. Before starting the restore process, please be sure to check the administrator password, authorized user passwords and the user list which were taken when the backup file was created.


-----------------------------------------------------------
Please be sure to read this SOFTWARE LICENSE AGREEMENT before using the software.

----------------------------------------------------------
                  CANON SOFTWARE LICENSE AGREEMENT (IMPORTANT!)
----------------------------------------------------------

This is a legal agreement ("Agreement") between you and CANON INC. ("Canon") 
and governing your use of Canon's software programs  (the "Software") for 
upgrading the firmware and for installing the upgraded firmware of the Canon's 
network camera (the "Products").

READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS AND RESTRICTIONS DESCRIBED IN 
THIS AGREEMENT BEFORE USING THE SOFTWARE. BY DOWNLOADING THE SOFTWARE YOU AGREE 
TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO
THE FOLLOWING TERMS AND CONDITIONS OF THIS AGREEMENT, YOU CANNOT USE THE SOFTWARE.
NO REFUND WILL BE MADE BECAUSE THE SOFTWARE WAS PROVIDED TO YOU AT NO CHARGE.

1. GRANT OF LICENSE
(1-1) Canon grants you a personal, limited and non-exclusive license to install 
the Software and use on the Products adapting the Software. 
(1-2) Canon grants you a personal, limited and non-exclusive license to use 
("use" as used herein shall include storing, loading, installing, accessing, 
executing or displaying) the Software solely for installing the upgrade firmware 
in the Products only on computers directly or via network connected to the 
Products. 
(2)You may make one copy of the Software solely for a back-up purpose.

2. RESTRICTIONS
You shall not use the Software except as expressly granted or permitted herein, 
and shall not assign, sublicense, sell, rent, lease, loan, convey or transfer to 
any third party the Software. You shall not alter, translate or convert to 
another programming language, modify, disassemble, decompile or otherwise reverse 
engineer the Software and you shall not have any third party to do so.

3. COPYRIGHT NOTICE
You shall not modify, remove or delete any copyright notice of Canon or its 
licensors contained in the Software, including any copy thereof.

4. OWNERSHIP
Canon and its licensors retain in all respects the title, ownership and 
intellectual property rights in and to the Software. Except as expressly provided 
herein, no license or right, express or implied, is hereby conveyed or granted by 
Canon to you for any intellectual property of Canon and its licensors.

5. EXPORT RESTRICTION
You agree to comply with all export laws and restrictions and regulations of the 
country involved, and not to export or re-export, directly or indirectly, the 
Software in violation of any such laws, restrictions and regulations, or without 
all necessary approvals.

6. NO SUPPORT
CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, DEALERS OR CANON'S 
LICENSORS ARE NOT RESPONSIBLE FOR MAINTAINING OR HELPING YOU TO USE THE SOFTWARE. 
NO UPGRADES, FIXES OR SUPPORTS WILL BE MADE AVAILABLE FOR THE SOFTWARE.

7. NO WARRANTY AND DISCLAIMER OF INDEMNITY
NO WARRANTY 
THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU 
ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME 
STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO
THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR 
JURISDICTION TO JURISDICTION. CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR 
DISTRIBUTORS, DEALERS OR CANON'S LICENSORS DO NOT WARRANT THAT THE FUNCTIONS 
CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF 
THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE. 

NO LIABILITY FOR DAMAGES 
IN NO EVENT SHALL EITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR 
DISTRIBUTORS DEALERS OR CANON'S LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER 
(INCLUDING WITHOUT LIMITATION, LOSS OF BUSINESS PROFITS, LOSS OF BUSINESS INFORMATION, 
LOSS OF BUSINESS INTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL OR CONSEQUENTIAL 
DAMAGES) ARISING OUT OF THE SOFTWARE, USE THEREOF OR INABILITY TO USE THE SOFTWARE 
EVEN IF EITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, 
DEALERS OR CANON'S LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
SOME STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF 
LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH 
RESULTING FROM NEGLIGENCE ON THE PART OF SELLER, SO THE ABOVE LIMITATION OR 
EXCLUSION MAY NOT APPLY TO YOU. 

RELEASE OF LIABILITY 
TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, YOU HEREBY RELEASE CANON, CANON'S 
SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS, DEALERS AND CANON'S LICENSORS 
FROM ANY AND ALL LIABILITY ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE 
SOFTWARE OR ITS USE.

8. TERM
By downloading the software you agree to be bound by the terms and conditions of 
this agreement and it remains in effect until terminated. You may terminate this 
Agreement by destroying the Software including any and all copies thereof. This 
Agreement shall also terminate if you fail to comply with any terms hereof. Upon 
termination of this Agreement, in addition to Canon enforcing its respective legal 
rights, you must then promptly destroy the Software including any and all copies 
thereof. Notwithstanding the foregoing, Sections 4, and 7 through 10 shall survive 
any termination of this Agreement.

9. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 
(October 1995), consisting of "commercial computer software" and "commercial 
computer software documentation," as such terms are used in 48 C.F.R. 12.212 
(September 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 
227.7202-4 (June 1995), all U.S. Government End Users shall acquire the Software 
with only those rights set forth herein. Manufacturer is Canon Inc./30-2, 
Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.

10. SEVERABILITY
In the event that any section hereof is declared or found to be illegal by any 
court or tribunal of competent jurisdiction, such section shall be null and void 
with respect to the jurisdiction of that court or tribunal and all the remaining 
provisions hereof shall remain in full force and effect.

11. ENTIRE AGREEMENT
BY DOWNLOADING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS 
AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU 
ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT 
BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL 
PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS 
BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS 
AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF 
CANON.

Should you have any questions concerning this Agreement, or if you desire to contact 
Canon for any reason, please write to Canon's sales subsidiary or distributor/dealer, 
serving the country where you obtained the Products.

                                                                       CANON INC.

 - Follow the procedure described below to download the file. 
 - The file is a self-extracting file. 
 
1. Click the file mentioned below to open the download window, then click [Save].

2. Specify where to save the file (ex. on the desktop) and click [Save]. A file with the same name (.exe file) is downloaded to the specified location.

3. Double-click the downloaded file to automatically extract the file and create a folder. 

4. Double-click a PDF file in the folder to open. Follow the instruction in the manual to back up and restore.