English | Spanish | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
01/11/2013
History
Modifications from Ver.4.01
a) The problem of compatibility when loading custom media created in Mac to Windows has been fixed.
b) Previously, while editing paper, 2 identical names; one for the source media and the other for the media you are editing based on the source media, would appear on the printer panel. This problem has been fixed.
c) The message that appears when media information of different model is loaded has been changed as follows.
"The model information in the Media Information File does not match the destination printer."
Environment
The following hardware and software are recommended for this software.
Operating Systems:
Microsoft Windows 8, English edition
Microsoft Windows 7, English edition
Microsoft Windows Server 2008, English edition
Microsoft Windows Vista, English edition
Microsoft Windows Server 2003 R2, English edition
Microsoft Windows Server 2003, English edition
Microsoft Windows XP Professional/Home Edition, English edition
Microsoft Windows 2000 Professional/Server, English edition
(Note)
This printer cannot be used with Microsoft Windows 64-bit edition.
Hardware:
Any computer running the software listed above.
Caution
- You must log into Windows as an Administrator before the installation.
- Before the installation, close all the other application software. You cannot install with imagePROGRAF Status Monitor running.
Setup
- For more about installation the procedure, please refer to the manual.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.