Details - Cinema RAW Development 1.2 for Windows
ID: 0200343602_EN_1
Software for developing, playing back, and exporting the RAW clips captured with Canon's digital cinema cameras.

How to Download and Install
Please refer to the instructions below on how to download and install the software.
Exit all other applications when installing this software.

1. Download "" from the download page.

2. Extract "" on the computer to generate "crdw12.exe".

3. Double-click "crdw12.exe".

4. Follow the on-screen instructions to complete the installation.
Driver/Software Details
File Name
File Version
File Size
63.39 MB
File Languages
English | Japanese
Post Date
Changes for Cinema RAW Development 1.2 for Windows :

- 4K1K RAW clip is now supported.
- Clips shot with DCI-P3+/Cinema Gamut being set are now supported.
- Export of material data where BT.709 / Wide DR / DCI gamma is applied is now supported.
- Upgraded the "Input Device Transform (IDT)" used for exporting OpenEXR files to version 1.1.
Required System Configuration:

To use this software, your computer has to meet the following system requirements.

1. Supported OS
Windows 7 SP1 64-bit, Windows 8 64-bit

2. Supported computers
Computers preinstalled with the OS above (The operation of upgraded computers is not guaranteed.)

- Intel Core i3/i5/i7, Xeon

- A GPU that supports CUDA (Compute Capability 2.0 or higher), manufactured by NVIDIA. 
The processing performance should be lower on a computer that has no supporting GPU.
For details, please see Cautions and limitations file (in PDF format) that is included in the downloaded file.

- 4 GB or more

SDI Board (required for checking the SDI output on a monitor)
- AJA KONA 3G (Driver V10.4.1)
There are restrictions to monitors that can be connected and output frame rates.
For details, please see the Cautions and limitations file (in PDF format) that is included in the downloaded files.

3. Display
- Resolution: 1,024×768 or higher

4. Supported Models
EOS C500, EOS C500 PL

Recommended System Configuration:

In order to preview RAW clips at 24fps, we recommend the following system specifications In addition to the necessary system requirements listed above.

- Intel Core i7 3.06 GHz or faster

- NVIDIA GeForce GTX680

- 16 GB or more

- Read 300 MB/s or above
It is recommended that the drive to which [RAW CLIPS] are saved and the drive to which [Full-quality Files] and [Proxy Files] are saved are on different devices.
The Cinema RAW Development 1.2 (crdw12.exe) file and Cautions and limitations file (in PDF format in two Japanese and English) are included in the downloaded file.
Read through the cautions and limitations before installing Cinema RAW Development 1.2.
Zip Type
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.