Details - Firmware Update Tool Ver.3.21 for Mac OS X v10.2-v10.5
ID: 0200357902_EN_1
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the imagePROGRAF FirmUpdate file. 
 The imagePROGRAF Firmware Update Tool is installed.
(4) Access the Canon website and download the firmware corresponding to your printer.
(5) Put the downloaded firmware in the Data folder in the location where imagePROGRAF Firmware Update Tool is installed.
(6) Execute the installed imagePROGRAF Firmware Update Tool.
Driver/Software Details
File Name
FUT-MacX-321.dmg
File Version
3.21
File Size
4.21 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Chinese
Post Date
02/06/2014
Environment
Use this program with the systems and the operating environments below.

Software:
Mac OS X v10.2 - v10.5, English edition

Hardware:
The softwares above require the Intel processor or PowerPC of the Macintosh Series computers.

Printers:
This program is intended for use with the following printers.

iPF500/iPF510/iPF5000/iPF5100
iPF600/iPF605/iPF610
iPF6000S/iPF6100/iPF6200
iPF6300/iPF6350/iPF6300S
iPF6400/iPF6410/iPF6450/iPF6460
iPF650/iPF655
iPF700/iPF710/iPF720
iPF750/iPF755/iPF760/iPF765
iPF8000/iPF8100/iPF8110/iPF8000S/iPF8010S
iPF810/iPF815/iPF820/iPF825
iPF8300/iPF8310/iPF8300S/iPF8310S
iPF8400/iPF8410
iPF9000/iPF9100/iPF9110/iPF9000S/iPF9010S
iPF9400/iPF9410/iPF9400S/iPF9410S
(Some printer models are available in the limited countries or areas.)

Interface Connectivity:
The printer and computer where this program is executed must be connected with either of the following methods.

- Connected via an AppleTalk network and capable of printing via the network.
- Connected via a Bonjour and capable of printing via the network. 
- Connected via a USB or FireWire port cable and capable of printing as a local printer.
Caution
*  Before you start the firmware version update program, close any other applications 
   that are running.

*  Before executing the firmware update of a printer connected to the network, 
   make sure AppleTalk is selected "Active".

*  Do not try to use the printer while the firmware version update program is running. 
   If a print job is executing, cancel the print job or wait for the job to finish 
   before you execute the version update program.

*  Never switch off the target printer while the firmware version update program is running.

*  If the firmware version update fails while writing to the flash ROM, 
   you may not be able to start the printer. In this case, 
   contact a Canon service center or the dealer where you purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.