Details - Firmware Update Tool Ver. 24.01 for OS X v10.6/v10.7/v10.8/v10.9/v10.10
ID: 0200358002_EN_5
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the iPFFirmwareUpdateTool.pkg file. 
    The imagePROGRAF Firmware Update Tool is installed.
(4) Execute the installed imagePROGRAF Firmware Update Tool.
Driver/Software Details
File Name
FUT-MacX10-2401.dmg
File Version
24.01
File Size
1.03 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Chinese
Post Date
06/26/2015
History
Modifications from Ver.24.00 to Ver.24.01
- OS X v10.10 has been added as a supported OS.
Environment
The following hardware and software are recommended for this software.

Software:
     OS X v10.10, English edition
     OS X v10.9,  English edition
     OS X v10.8,  English edition
     OS X v10.7,  English edition
     OS X v10.6,  English edition

Hardware:
     Any computer running the software listed above.

Printers:
     Canon imagePROGRAF series

Interface Connectivity:
     The printer and computer where this program is executed must be connected with either of the following methods.

     - Connected via a Bonjour and capable of printing via the network. 
     - Connected via a USB cable and capable of printing as a local printer.
Caution
- Requires Administrator access rights.
- Before you start the firmware version update program, close any other applications that are running.
- Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
- Never switch off the target printer while the firmware version update program is running.
- If you are unable to connect to the Internet to get the latest information, perform the following procedure.
   1. Access the Canon website from a computer that can connect to the Internet and download the firmware corresponding to your printer.
   2. Copy the downloaded firmware to the computer where this program is installed.
   3. Run this program, select "Specify the Firmware", and specify the downloaded firmware.
- If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer. In this case, contact a Canon service center or the dealer where you purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.