Details - Backup Tool & Restore Tool Ver.4.1.0
ID: 0200362102_EN_1
Backup Tool and Restore Tool is installation and maintenance supporting software for backing up or restoring settings of network camera VB-S30D/VB-S31D/VB-S800D/VB-S900F/VB-H41/VB-H610VE/VB-H610D/VB-H710F/VB-M40/VB-M600VE/VB-M600D/VB-M700F/VB-C60/VB-C500. Version 4.1.0 incorporates the following improvement: 1. Support for Windows 8.1 and Windows Server 2012 R2.

How to Download and Install
Follow the procedure described below to download the file. 
1. Download the file to any folder.
2. Double-click the file to start the decompression program.
3. Select any folder, and start decompression (UnZip).
4. For further instructions, refer to Readme in the decompressed folder.
Driver/Software Details
File Name
vbbkrs-v410.exe
File Version
4.1.0
File Size
9.80 MB
File Languages
English | Spanish | German | French | Italian | Japanese
Post Date
03/28/2014
History
Ver. 4.0
1. Support for Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S900F.
2. Support for Windows 8 and Windows Server 2012.

Ver. 3.0
1. Support for Network Camera VB-H41/VB-H610VE/VB-H610D/VB-H710F.

Ver. 2.0.1
1. VB-M40 firmware version 1.0.1 support added.
Environment
- Windows XP Home/Professional SP3 32-bit
 - Windows Server 2003 Standard SP2 32-bit
 - Windows Server 2003 R2 Standard SP2 32-bit
 - Windows Vista Ultimate/Business/Enterprise/Home Premium SP2 32/64-bit
 - Windows 7 Ultimate/Professional/Enterprise/Home Premium SP1 32/64-bit
 - Windows 8/Windows 8 Pro/Windows 8 Enterprise 32/64-bit
 - Windows 8.1/Windows 8.1 Pro/Windows 8.1 Enterprise 32/64-bit
 - Windows Server 2008 Standard SP2 32/64-bit
 - Windows Server 2008 R2 Standard SP1 64-bit
 - Windows Server 2012 Standard 64-bit
 - Windows Server 2012 R2 Standard 64-bit
Caution
<For Backup Tool / Restore Tool>
• Do not disconnect or turn off the camera during the backup or restore processes. Doing so may damage the camera.
• Do not run Backup Tool or Restore Tool on multiple PCs connected to the same network at the same time. Doing so may damage the camera.
• When using Windows Vista, Windows 7, Windows 8/8.1, Windows Server 2008/2008 R2, or Windows Server 2012/2012 R2, do not store the Backup Tool executable file (NetworkCameraBK.exe) and the Restore Tool executable file (NetworkCameraRS.exe) in "C:\Windows" or "C:\Program Files". Log files may not save properly if you do so. In addition, do not save backup files to "C:\Windows" or "C:\Program Files".
• Close all other applications before using Backup Tool or Restore Tool. In addition, make sure the cameras are not connected to other applications, including the software installed on the cameras, VK-64/VK-16 Viewer, RM-Lite Viewer, etc.
• Do not run multiple instances of the tool on the same PC. Although a tool can be run with an older version at the same time, operation is not guaranteed in such cases.
• Use the tools in a stable network environment, such as an intranet.
• Backup Tool and Restore Tool perform backup and restore processes via FTP communication with the camera. Backup and restore processes via a proxy server are not supported. When using a router or another device between the cameras and the PC on which the tools are running, make sure to enable FTP in your network environment.
• SSL encrypted transmission is not supported.
• If the font size is set to [Extra Large Fonts] or [Large Fonts], the text for window titles may be truncated.
• If you click the [Browse] button and specify a nonexistent drive in the file selection dialog box in a Windows Vista, Windows 7, Windows 8/8.1, Windows Server 2008/2008 R2, or Windows Server 2012/2012 R2 environment, a system message may appear.

<For Backup Tool only>
• If a backup file is saved under the same name as the log file, the log information will be added to the backup file. Be sure to save each backup file under a different name from the log file.
• The log file name is initially set to "NetworkCameraBK.log".

<For Restore Tool only>
• Restore Tool allows you to select whether to restore the administrator password.
However, the authorized user list and password will be restored, regardless of the above selection.
• If the administrator password is restored, it will revert to the one that was in place when the backup file was created. Therefore, before starting the restore process, make sure to check the administrator password that was in place when the backup file was created.
• Backup files that have been modified, such as by editing or processing, cannot be restored.
• Backup files can be restored only when the file version matches that of Restore Tool.
• Backup files can be restored only on network cameras where the camera model, video signal (NTSC or PAL), and audio input (enabled or disabled) all match the corresponding information of the backup file.
• Backup files can be restored only when the firmware versions at the time of backup and restore correspond with each other, or when the firmware version of the camera, on which the file will be restored, is more recent.
• Restore Tool does not restore network setting values (address setting method, IP address, subnet mask, default gateway, LAN interface, maximum transmission unit, whether to enable or disable IPv6), so the information will remain the same as the camera's current settings. In addition, the following items will not be restored depending on the model.
– VB-C60 and VB-C500: LED settings
– VB-H41, VB-H610VE, VB-H610D, VB-H710F, VB-M40, VB-M600VE, VB-M600D and VB-M700F: Settings related to SSL and IPsec

<For Backup Tool only>
• If a log file and backup file with the same name exist in the same folder, the log information will be added to the backup file. Be sure to save each backup file under a different name from the log file.
• The log file name is initially set to "NetworkCameraBK.log".

<For Restore Tool only>
• Restore Tool allows you to select whether to restore the administrator password.
However, the authorized user list and password will be restored, regardless of the above selection.
• If the administrator password is restored, it will revert to the one that was in place when the backup file was created. Therefore, before starting the restore process, make sure to check the administrator password that was in place when the backup file was created.
• Backup files that have been modified, such as by editing or processing, cannot be restored.
• Backup files can be restored only on network cameras where the camera model matches the corresponding information of the backup file.
• Backup files can be restored only when the firmware versions at the time of backup and restore correspond with each other, or when the firmware version of the camera, on which the file will be restored, is more recent.
• Restore Tool does not restore network setting values (address setting method, IP address, subnet mask, default gateway, LAN interface, maximum transmission unit, whether to enable or disable IPv6), so the information will remain the same as the camera's current settings. In addition, the following items will not be restored depending on the model.
– LED settings: VB-C60 and VB-C500
– Settings related to SSL and IPsec: VB-S30D, VB-S31D, VB-S800D, VB-S900F, VB-H41, VB-H610VE, VB-H610D, VB-H710F, VBM40,VB-M600VE, VB-M600D and VB-M700F
Zip Type
exe
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.