Details - MX310 series Firmware Upgrade Utility Ver. 1.040 (Mac OS X 10.2/10.3/10.4/10.5/10.6/10.7)
ID: 0400008101_EN_5
This is a program to upgrade the MX310 series software from versions 1.010 - 1.020 to version 1.040. If your MX310 series software version is 1.040 or later, the upgrade is not necessary.

How to Download and Install
Download fu103mx310sosx1040en.dmg from the web site to the desktop screen of your computer, and double-click it. It will be decompressed to the fu103mx310sosx1040en disk image file. Double-click to open it, and read UpgradeProcedure(Mac).htm in the file.
Driver/Software Details
File Name
fu103mx310sosx1040en.dmg
File Version
1.040
File Size
6.13 MB
Post Date
12/27/2011
Download and Installation Instructions
- RomVUp: Printer upgrade utility software to upgrade functionality of a USB-connected MX310 series
- MX310_MX318_V1040.dat: Firmware data (software) for the MX310 series
- UpgradeProcedure(Mac).htm: Step-by-step upgrade procedures and other important information regarding the upgrade such as cautions.
History
- During a call on a phone connected to the external device jack of the printer, depending on the usage environment, the printer entered the fax reception mode and the call was terminated. In the new firmware version, this problem is rectified.
Environment
Software:
- Mac OS X 10.2.8/10.3.9/10.4.11/10.5.8/10.6/10.7

Hardware:
- Computer: Mac OS X operating Macintosh computer
- Memory: OS operation-guaranteed memory capacity
- Interface: USB
- Printer cable: USB cable
- Display: 800 x 600 or higher resolution
Caution
If you have the machine with a serial number below,
please upgrade the firmware.
- USA model: AAVH00001 - AAVH99999,ABAW00001 - ABAW28715


- The upgrade cannot be performed via network.
- Before the upgrade, install the MX310 series printer driver to the computer via USB connection.
- Connect a single MX310 series unit to the computer via a USB cable, and disconnect all other printer units. The upgrade cannot be performed properly if two or more printer units are connected to the computer.
- Exit Classic. The upgrade cannot be performed if application software under Classic is active.
- Be sure to read UpgradeProcedure(Mac).htm.

- Please check if any received faxes are stored in memory and then print them before proceeding. The firmware upgrade sequence deletes all fax documents from memory.
One touch dial and speed dials data are kept in memory. You will not need to input this data again.
- When the clock inside the MX310 series has been reset, adjust it again.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.