Details - MX700 Firmware Upgrade Utility Ver. 1.080 (Windows 7/Vista/XP/2000)
ID: 0400009101_EN_2
This is a program to upgrade the MX700 software from versions 1.020 - 1.070 to version 1.080. If your MX700 software version is 1.080 or later, the upgrade is not necessary.

How to Download and Install
Download fu123mx700win1080us.exe from the web site to the desktop screen of your computer, and double-click it. It will be decompressed to the fu123mx700win1080us folder. Double-click it to open, and read UpgradeProcedure(Win).htm in the folder.
Driver/Software Details
File Name
fu123mx700win1080us.exe
File Version
1.080
File Size
7.52 MB
Post Date
08/04/2010
Download and Installation Instructions
- RomVUp.exe: Printer upgrade utility software to upgrade functionality of a USB-connected MX700
- MX700_V1080.dat: Firmware data (software) for the MX700
- UpgradeProcedure(Win).htm: Step-by-step upgrade procedures and other important information regarding the upgrade such as cautions.
History
- During a call on a phone connected to the external device jack of the printer, depending on the usage environment, the printer entered the fax reception mode and the call was terminated. In the new firmware version, this problem is rectified.
Environment
Hardware:
- Computer: OS operation-guaranteed computer
- Memory: OS operation-guaranteed memory capacity
- Interface: USB
- Printer cable: USB cable
- Display: 800 x 600 or higher resolution
Caution
If you have the machine with a serial number below,
please upgrade the firmware.
- USA model: AAXN00001 - AAXN96803

- The upgrade cannot be performed via network.
- Log on as an Administrator in Windows 7, Vista, Windows XP, or Windows 2000.
- Before the upgrade, install the MX700 printer driver to the computer via USB connection.
- If your computer OS is Windows XP or Windows 2000, confirm that Enable bidirectional support is selected in the Ports tab of MX700 Properties.
- Connect a single MX700series unit to the computer via a USB cable, and disconnect all other printer units. The upgrade cannot be performed properly if two or more printer units are connected to the computer.
- Be sure to read UpgradeProcedure(Win).htm.

- Please check if any received faxes are stored in memory and then print them before proceeding. The firmware upgrade sequence deletes all fax documents from memory.
One touch dial and speed dials data are kept in memory. You will not need to input this data again.
- When the clock inside the MX700 has been reset, adjust it again.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.