Details - iPF8000S Firmware Ver.1.52 (Firmware Update Tool Ver.3.40) for Windows x64
ID: 0400010902_EN_11
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.
Driver/Software Details
File Name
iPF8000S-FUT-Win64-152.exe
File Version
1.52
File Size
15.91 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
02/14/2013
History
Modifications from Ver.1.51 to Ver.1.52
1. The problem that the community name setting in SNMP setting was not processed correctly has been fixed.

Modifications from Ver.1.47 to Ver.1.51
1. The infrequent failure that a job sent during transition to sleep mode might be cancelled has been fixed.
2. The fairly infrequent failure of printer not retrieving from sleep mode has been fixed.

Modifications from Ver.1.39 to Ver.1.47
- A new print mode has been added for Glossy Paper/ Coated Paper/ Plain Paper.
- The failure of recovery operation when out of paper has been fixed.

*To use the new function, you need to install the following software:
    Printer Driver: Ver.4.40
    Media Configuration Tool: Ver.2.8404
Environment
Use this program with the systems and the operating environments below.

  Software:   Microsoft Windows 8 64-bit edition, English Edition
              Microsoft Windows Server 2012 64-bit edition, English Edition
              Microsoft Windows 7 64-bit edition, English Edition
              Microsoft Windows Server 2008 R2 64-bit edition, English Edition          Microsoft Windows Server 2008 64-bit edition, English Edition
              Microsoft Windows Vista 64-bit edition, English Edition
              Microsoft Windows Server 2003 R2 64-bit edition, English Edition
              Microsoft Windows Server 2003 64-bit edition, English Edition
              Microsoft Windows XP Professional 64-bit edition, English Edition

  Hardware:   Any computer running the software listed above.

 Interface Connectivity:
  The printer and computer where this program is executed must be connected 
  with either of the following methods.

  - Connected via a TCP/IP network and capable of printing via the network.
  - Connected via a USB or IEEE 1394 port cable and capable of printing 
    as a local printer.

  Note: If you are using IEEE1394, IEEE1394 Class Driver is needed.
Caution
* You must log into Windows as an Administrator before the installation.
* Before You start the firmware version update program, close any other applications that are running.
* Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before You execute the version update program.
* Never switch off the target printer while the firmware version update program is running.
* If the firmware version update fails while writing to the flash ROM, You may not be able to start the printer. In this case, contact a Canon service center or the dealer where You purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.