Details - iPF6200 Firmware Ver.1.02 (Firmware Update Tool Ver.3.32) for Windows
ID: 0400022302_EN_3
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) Decompress it on your computer hard disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.
Driver/Software Details
File Name
File Version
File Size
13.22 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
Modifications from Ver.1.00
* In case the nozzles are clogged, formerly you would stop printing and check the printout, and then continue printing by pressing the Online key. 
  Now it automatically checks the level of clogging, and if it is possible to print it will continue printing, and if it needs a printhead replacement, it will display a Replace Printhead message.
  This modification will greatly improve the workability. 

* The paper feeding sequence for roll paper has been improved, aiming for a decrease in paper jam.
* Hardware:   Any computer running the software listed above.

*  Interface Connectivity:
  The printer and computer where this program is executed must be connected with either of the following methods.

  - Connected via a TCP/IP network and capable of printing via the network.
  - Connected via a USB or IEEE 1394 port cable and capable of printing as a local printer.

  Note: Note: If you are using IEEE1394, IEEE1394 Class Driver is needed.
*  You must log into Windows as an Administrator before the installation.
*  Before You start the firmware version update program, close any other applications that are running.
*  Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before You execute the version update program.
*  Never switch off the target printer while the firmware version update program is running.
*  If the firmware version update fails while writing to the flash ROM, You may not be able to start the printer. In this case, contact a Canon service center or the dealer where You purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.