Details - iPF6000S Firmware Ver.1.08 (Firmware Update Tool Ver.3.60) for Mac OS X v10.6-v10.8
ID: 0400023802_EN_6
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the iPF6000S_FirmwareUpdate.pkg file. 
    The imagePROGRAF Firmware Update Tool is installed.
(4) Execute the installed imagePROGRAF Firmware Update Tool.
Driver/Software Details
File Name
iPF6000S-FUT-MacX8-0108.dmg
File Version
1.08
File Size
15.98 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Chinese
Post Date
05/27/2013
History
Modifications from Ver.1.07
1. Fixed the failure that white line appears on the image under certain printing conditions at the binary printing.

Modifications from Ver.1.04
1. A new print mode has been added for Glossy Paper/ Coated Paper/ Plain Paper.
2. The failure of recovery operation when out of paper has been fixed.
3. The operability of manual paper feeding from front has been improved.
4. "Automatic retraction time"for newspaper proofing media has been changed.

*To use the new function, you need to install the following software:
    Printer Driver: Ver.4.40
    Media Configuration Tool: Ver.3.3104
Environment
The following hardware and software are recommended for this software.

 Software:
     Mac OS X v10.6 to v10.8, English edition

 Hardware:
     The softwares above require the Intel processor of the Macintosh Series 
     computers.

  Interface Connectivity:
     The printer and computer where this program is executed must be connected 
     with either of the following methods.

     - Connected via a Bonjour and capable of printing via the network. 
     - Connected via a USB cable and capable of printing as a local printer.
Caution
Note the following limitations when using this software.
- Before you start the firmware version update program, close any other applications that are running.
- Do not try to use the printer while the firmware version update program is running. 
  If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
- Never switch off the target printer while the firmware version update program is running.
- If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer. In this case, contact a Canon service center or the dealer where you purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.