Details - iPF6350 Firmware Ver.1.24 (Firmware Update Tool Ver.3.50) & Media Information File (US) Version 0007 for Mac OS X v10.6-v10.8
ID: 0400035102_EN_6
< Firmware Update Tool > You can use this program to update the printer firmware version. < Media Information File > Media Information Filecan be registered on the printer control panel and in the printer driver by using the Media Configuration Tool.

How to Download and Install
For more about installation the procedure, please refer to "Guide\iPF6350\Install-6350_E.pdf".

< Firmware Update Tool >
(1) Switch the printer on.
(2) Decompress it on your computer hard disk.
(3) Execute the imagePROGRAF FirmUpdate file. 
    The imagePROGRAF Firmware Update Tool is installed.
(4) Execute the installed imagePROGRAF Firmware Update Tool.

< Media Information File >
For more about installation the procedure, please refer to the install guide.
Driver/Software Details
File Name
iPF6350-FUT-124-MIF-US-0007-MacX7.dmg
File Version
1.24-0007
File Size
82.07 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Chinese
Post Date
01/11/2013
History
< Firmware Update Tool >
Modifications from Ver.1.23 to Ver.1.24
1. Optimized the print head control.
2. The problem that the community name setting in SNMP setting was not processed correctly has been fixed.
3. Fixed the issue that the illustration of the release lever is displayed on LCD even though it does not exist.

Modifications from Ver.1.21 to Ver.1.23
1. The control of waste ink has been optimized.
2. The infrequent failure that a job sent during transition to sleep mode might be cancelled has been fixed.

Modifications from Ver.1.20 to Ver.1.21
1. Change of specifications of printer color calibration
   * This modification requires application of "MIF version 000500000000 or later" released
2. The failure of user password settings in RemoteUI has been fixed.

Modifications from Ver.1.08 to Ver.1.20
1. Improved display of remaining time of printing

Modifications from Ver.1.05 to Ver.1.08
1. The failure that printer might not retrieve from sleep mode in rare cases has been fixed.

Modifications from Ver.1.03 to Ver.1.05
1. The problem that the number of days after printhead installation might be incorrect at the first installation has 

been fixed.

< Media Information File >
Modifications from Ver.0006 to Ver.0007 (MCT Ver.4.03)
1. The Glossy Paper/Semi-Glossy Paper listed below have been supported.
-Glossy Photo Paper 170gsm
-Satin Photo Paper 170gsm
-Glossy Photo Paper 200gsm
-Satin Photo Paper 200gsm
-Glossy Photo Paper 240gsm
-Satin Photo Paper 240gsm
2. It has been improved to reduce the JAM error (paper jam).

Modifications from Ver.0005 to Ver.0006 (MCT Ver.4.02)
1. Media information of Lightweight Gloss Proof Paper and Lightweight Matte Proof Paper has been added.

Modifications from Ver.0004 to Ver.0005 (MCT Ver.4.02)
1. The fairly infrequent problem of colors not adjusted after performing calibration on the main body has been fixed. 

Modifications from Ver.0003 to Ver.0004 (MCT Ver.4.02)
1. The failure that a calibration error occurs in rare occasions when performing calibration, has been fixed.

Modifications from Ver.0002 to Ver.0003 (MCT Ver.4.02)
1. Media information of Premium Glossy Paper 2 280 and Premium Semi-Glossy Paper 2 280 has been added.

Modifications from MCT Ver.4.02 to MIF Ver.0002
1.  The profile of [Perceptual (People/ Dark Areas)] has been changed so that the color reproducibility and gradation are improved.
2. The profiles of "Fine Art (Photo)" and "Fine Art (Photo HW)" have been changed.
Environment
< Firmware Update Tool >
Software:
  Mac OS X v10.6-v10.8, English edition

 Hardware:
  The softwares above require the Intel processor or PowerPC of the 
  Macintosh Series computers.

Interface Connectivity:
  The printer and computer where this program is executed must be connected 
  with either of the following methods.

  - Connected via an Bonjour and capable of printing via the network. 
  - Connected via a USB or FireWire port cable and capable of printing as a local printer.

< Media Information File >
Install the Media Configuration Tool Ver.3.64 if it is not installed.

*Software
   Mac OS X v10.3.9 - v10.8
Caution
< Firmware Update Tool >
*  Before you start the firmware version update program, close any other applications 
   that are running.

*  Before executing the firmware update of a printer connected to the network, 
   make sure AppleTalk is selected "Active".

*  Do not try to use the printer while the firmware version update program is running. 
   If a print job is executing, cancel the print job or wait for the job to finish 
   before you execute the version update program.

*  Never switch off the target printer while the firmware version update program is running.

*  If the firmware version update fails while writing to the flash ROM, 
   you may not be able to start the printer. In this case, 
   contact a Canon service center or the dealer where you purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.