Details - AirPrint Firmware Updater (Windows) for MX430 series Ver.1.0
ID: 0400049202_EN_6
AirPrint firmware updater will upgrade your printer's firmware to version 2.000. A USB cable & a computer are needed to perform this upgrade. If your printer's firmware is already Version 2.000 or later, an update is not needed. Firmware version 2.000 supports AirPrint. Refer to the Update Procedure (part of the download file) to check what version firmware you have.
OS
  • Windows 8
  • Windows 8 (x64)
  • Windows 7
  • Windows 7 (x64)
  • Windows Vista
  • Windows Vista (x64)
  • Windows XP
Driver/Software Details
File Name
 
fuu_-win-mx430-1_0-ea7.exe
File Version
 
1.0
File Size
 
15.95 MB
File Languages
 
English | Spanish | German | French | Italian | Japanese | Chinese
Post Date
 
04/02/2013
Download and Installation Instructions
 
- Printer Update.exe:  The firmware for updating the functions of the printer connected via USB cable.
- HowTo folder:  Includes the manual for firmware update procedures, and how to use AirPrint. Launch it from Manual.html inside the language’s folder.
History
 
[Ver.1.0]
- Windows 8 är ett operativsystem som också stöds.
- Supports AirPrint.
Environment
 
Windows 8(32bit)
Windows 8(64bit)
Windows 7(32bit)
Windows 7(64bit)
Windows Vista(32bit)
Windows Vista(64bit)
Windows XP SP2 or later
Caution
 
- A USB cable & a computer are needed to perform this upgrade.
- See the attached manual to confirm the update procedures.
- Execute updating in the environment which you log onto as a member of the Administrators group.
Setup
 
Double-click the downloaded exe. file to decompress it. Then, open the newly-created "fuu_-win-mx430-1_0-ea7" folder. And open the language’s folder inside "HowTo" folder, then execute the update of the firmware based on the manual "Manual.html."
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.