Details - AirPrint & Google Cloud Print Firmware Updater (Macintosh) for MX890 series Ver.2.3
ID: 0400050102_EN_7
AirPrint & Google Cloud Print Firmware Updater will upgrade your printer's firmware to version 3.020. A USB cable & a computer are needed to perform this upgrade. If your printer's firmware is already version 3.020 or later, an update is not needed. Firmware version 2.000 supports AirPrint. Firmware version 3.000 or later supports AirPrint and Google Cloud Print. Refer to the Update Procedure (part of the download file) to check what version firmware you have.
OS
  • Mac OS X v10.8
  • Mac OS X v10.7
  • Mac OS X v10.6
  • Mac OS X v10.5
  • Mac OS X v10.4
Driver/Software Details
File Name
 
mfuu-mac-mx890-2_3-ea7.dmg
File Version
 
2.3
File Size
 
23.99 MB
File Languages
 
English | Spanish | German | French | Italian | Japanese | Chinese
Post Date
 
07/26/2012
Download and Installation Instructions
 
- Printer Update: The firmware for updating The functions of The Printer connected via USB cable.
- language’s folder: Includes the manual for firmware update procedures, and how to use AirPrint and Google Cloud Print. Launch it from Manual.html inside the language’s folder.
History
 
[Ver.2.3]
- OS X Mountain Lion (v10.8) has been added as a supported OS.

[Ver.2.2]
1.The following problem has been rectified:
- The printer is crashed when continuously using Google Cloud Print.

[Ver.2.1]
1.Firmware
- The following problem has been rectified:
The power is not turned OFF with the message "Ending...Please wait a while." displayed even after trying to turn OFF the power.

[Ver.2.0]
1.Firmware
- Supports Google Cloud Print.
2.Manual
- "How to use Google Cloud Print" has been added.

[Ver.1.0]
- Supports AirPrint.
Environment
 
OS X 10.4.11/10.5.8/10.6.8/10.7/10.8
Caution
 
- A USB cable & a computer are needed to perform this upgrade.
- See the attached manual to confirm the update procedures.
- Execute updating in the environment which you log onto as a member of the Administrators group.
Setup
 
Double-click the downloaded dmg. file to decompress it. Then, open the newly-created "Printer Update" folder. And open the Manual.html inside the language’s folder, then execute the update of the firmware based on the manual "Manual.html."
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.