Details - IXY 51S/PowerShot ELPH 510 HS/IXUS 1100 HS Firmware Version 1.0.1.0 [Windows]
ID: 0400051302_EN_1

Driver/Software Details
File Name
51s-v1010-win-1.zip
File Version
1.0.1.0
File Size
5.79 MB
File Languages
English | Spanish | French | Japanese | Chinese
Post Date
04/09/2012
Download and Installation Instructions
Firmware Version 1.0.1.0 incorporates the following fixes and improvements.
Fixes a phenomenon where the shutter speed becomes 1/3200 sec. and the aperture becomes f/5.6 when shooting very bright subjects.
After the firmware update, the shutter speed will be 1/4000 and the aperture will be f/6.3 when shooting very bright subjects.

Firmware Version 1.0.1.0 is for cameras with firmware up to Version 1.0.0.0. If the camera's firmware is already Version 1.0.1.0, it is not necessary to update the firmware.
Please note that, once the camera is updated to the latest version, it cannot be restored to a previous version.

How to Identify Cameras eligible for the Firmware Update:
Please check the serial number on the bottom of the camera.
This firmware update is for products with the following serial numbers.
-Serial number
Products whose sixth digit from the left is "2" or less  [*****2******].


Q&A Section:

Preparations for the firmware update:
After the downloaded compressed file (zip file) is extracted, a firmware folder is created. 
* Extracting the downloaded file:
Right-click the zip file, and then select [Extract All] to extract the file.

The extracted folder contains the firmware (file name: IXY51S.FI2 / file size: 3,570 KB), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese). Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.

The following things are required to perform this firmware update:
1. An IXY 51S/PowerShot ELPH 510 HS/IXUS 1100 HS digital camera
2. A computer (OS: Windows)
* OS Requirements: Windows 7 (Service Pack 1), Windows Vista (Service Pack 2), or Windows XP (Service Pack 3)
3. A 32 MB or higher-capacity SD Memory Card, an SDHC Memory Card, or an SDXC Memory Card (all commercially available)
4. A memory card reader (commercially available) or an SD card slot on the computer 
5. A fully-charged, dedicated battery pack or a dedicated AC adapter kit
6. The firmware (the file downloaded from the Web site)


Q1: What are some changes of Firmware Version 1.0.1.0?
A1: Fixes a phenomenon where the shutter speed becomes 1/3200 sec. and the aperture becomes f/5.6 when shooting very bright subjects.
After the firmware update, the shutter speed will be 1/4000 and the aperture will be f/6.3 when shooting very bright subjects.
Zip Type
zip
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.