Details - iPF9400 Firmware Version 1.18 (Firmware Update Tool Version 3.60) for Windows x64
ID: 0400071902_EN_3
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.
Driver/Software Details
File Name
iPF9400-FUT-Win64-0118.exe
File Version
1.18
File Size
26.68 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
10/10/2013
History
Modifications from Ver.1.16 to Ver.1.18
1.The failure rarely happens that the printer does not retrieve from sleep mode has been fixed.
2.Minor bug has been fixed.

Modifications from Ver.1.09 to Ver.1.16
1.The set value of the Nozzle Check interval has been changed as follows:
    Before: *Standard, 1 page
    After: *Standard, 1 page, 10 pages, Off
    *factory shipment value

Modifications from Ver.1.03 to Ver.1.09
1. Fixed the failure that the counter value of print pages does not count up correctly under specified environment.
Environment
Use this program with the systems and the operating environments below.

  Software:   Microsoft Windows 8 64-bit edition, English Edition
              Microsoft Windows Server 2012 64-bit edition, English Edition
              Microsoft Windows 7 64-bit edition, English Edition
              Microsoft Windows Server 2008 R2 64-bit edition, English Edition
              Microsoft Windows Server 2008 64-bit edition, English Edition
              Microsoft Windows Vista 64-bit edition, English Edition
              Microsoft Windows Server 2003 R2 64-bit edition, English Edition
              Microsoft Windows Server 2003 64-bit edition, English Edition
              Microsoft Windows XP Professional 64-bit edition, English Edition

  Hardware:   Any computer running the software listed above.

 Interface Connectivity:
  The printer and computer where this program is executed must be connected 
  with either of the following methods.

  - Connected via a TCP/IP network and capable of printing via the network.
  - Connected via a USB or IEEE 1394 port cable and capable of printing 
    as a local printer.

  Note: If you are using IEEE1394, IEEE1394 Class Driver is needed.
Caution
*  You must log into Windows as an Administrator before the installation.
*  Before You start the firmware version update program, close any other applications that are running.
*  Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before You execute the version update program.
*  Never switch off the target printer while the firmware version update program is running.
*  If the firmware version update fails while writing to the flash ROM, You may not be able to start the printer. In this case, contact a Canon service center or the dealer where You purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.