Details - [Windows] FAXPHONE L190 Firmware Update Tool (V14.06)
ID: 0400103001_EN_1
This fix resolves a problem that, in rare cases, causes a memory full message to be displayed, and subsequent sending to be prevented, when sending a fax. You will be asked to enter the product serial number before downloading the firmware. The serial number usually found rear side of the printer.

How to Download and Install
Firmware and instruction files have been compressed.
The following instructions show you how to download the compressed files and decompress them.

1. To download files, click [I Agree-Begin Download] icon, then input printer serial number, select [Save], and specify the directory where you want to save the file. Click [Save] to start the file download. 
2. Downloaded files are saved in the specified folder in a self-extracting format (.exe format).
3. Double-click the files to decompress them. A new folder will be created in the same folder.
4. Open the decompressed PDF file. Follow this PDF instruction to start the firmware update.
Driver/Software Details
File Name
Win_FAXPHONE_L190_FirmwareUpdateTool_V1406_usEN.exe
File Version
V14.06
File Size
6.29 MB
File Languages
English
Post Date
11/19/2013
History
This firmware includes the following corrections and improvements:
V14.06
The following fixes have been implemented for FAXPHONE L190.
1. Resolved a problem that, in rare cases, causes a memory full message to be displayed when sending a fax and subsequently prevents sending.
Caution
*Please note the following restrictions when using this software.
- When updating the firmware, be sure to wait until all operations (copy function, etc.) are complete before beginning the update operation. When the Processing/Data indicator on the operation panel is on or blinking, the device is processing operations. After the operation finishes, wait for the Processing/Data indicator to turn off.
- If the Error indicator is on or blinking, refer to the e-Manual and resolve the issue, and then perform the update operation after making sure that the Error indicator is off.
- If the update operation is performed while the device is processing other operations, or while images are stored in memory, those other operations will be canceled and the images stored in memory will be lost.
- If signals/data (print jobs, etc.) are sent to the device from another computer or application while the firmware update is in progress, a critical error may occur.
- Do not turn off the power or disconnect the USB cable while updating the firmware.
- If your computer enters sleep mode, the firmware update may not be performed properly.

*To prevent errors:
- To prevent problems resulting from operations performed on other computers during the firmware update, performing the update using a USB connection is recommended.
- If using the fax functions, disconnect the telephone line from the main unit.
- Configure your computer settings so that it will not enter sleep mode before performing the firmware update.
- If using a USB connection, do not connect the device through a USB hub as doing so may result in connection errors.
- Do not print, etc. while the firmware is being updated.
- If a critical error occurs (the device will not start after turning on the power, etc.), repairs will be required.
- For devices with fax functionality, it is recommended that you print out the Address Book information (one-touch, coded dialing, and group dialing) before updating, due to the possibility of power outages or other unforeseen accidents during the update operation.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.