Details - iPF9000S Firmware Ver.1.41 (Need "Firmware Update Tool" to upgrade)
ID: 0400109902_EN_3
Printer firmware for iPF9000S.

Driver/Software Details
File Name
File Version
File Size
12.72 MB
File Languages
English | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
Modifications from Ver.1.38. to Ver.1.41
1. Optimized head temperature during printing
2. Failure in printing at paper mismatch fixed

Modifications from Ver.1.37 to Ver.1.38
1.The accuracy of checking the print head for cloggings has been improved.
In rare cases, there may have been occasions in which a hardware error occurs even when there was no clogging in the print head.

Modifications from Ver.1.36 to Ver.1.37
1.In case the nozzles are clogged, formerly you would stop printing and check the printout, and then continue printing by pressing the Online key.  
Now it automatically checks the level of clogging, and if it is possible to print it will continue printing, and if it needs a printhead replacement, it will display a Replace Printhead message.
This modification will greatly improve the workability. 
2.[Paper Details]/[Return Defaults] function has been fixed.
3.A function to display the expected time of print completion when printing job data stored in HDD in the printer has been added. 

Modifications from Ver.1.35 to Ver.1.36
1.Revise the message that makes the ink level detection disable (Languages other than Japanese)
2.Add the paper jam detection function using cutting operation
3.Permanent countermeasures are taken against the issue that the initial ink filling not completed correctly and error 2F2F or 4048 occurs. (The pump structure of the ink tank unit has been changed.)
Install the Firmware Update Tool if it is not installed.
Install the Firmware Update Tool if it is not installed.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.