Web Content Viewer

Actions

CXDI-801C Wireless Digital Radiography System

Digital Detectors

CXDI-801C Wireless Digital Radiography System Datasheet

Features

  • High Resolution and High Sensitivity:
    With a 125 micron pixel pitch, the CXDI-801C Wireless Digital Radiography (DR) System delivers exceptional spatial resolution. The high sensitivity of the Cesium Iodide (CsI) scintillator helps reduce the X-ray exposure to the patient. The maximum 3 second exposure time allows this digital detector to be used with tomography equipment and for other exams that may require an exposure time of up to 3 seconds.

  • Portable and Flexible:
    The CXDI-801C Wireless DR System may be used in multiple x-ray rooms. Simply "check in" the digital detector in the computer. The Infrared (IR) Communication module makes it easy to switch detectors among the systems. For easy transport, an optional handle is available.

  • Wireless Range:
    The wireless communication may be set for applicable strength, and, depending on the room where the CXDI-801C Wireless DR System is used, the power can be managed. Should the wireless connection be lost, the unit will automatically attempt to reconnect and to prevent image loss. Acquired images are stored locally in the on-board memory. Once reconnected, the images can be retrieved. An optional wiring unit allows images to be transferred from a panel mounted in a Bucky tray to the control computer over hard wire.

  • 5 GHz for Fast Data Transfer:
    The CXDI-801C Wireless DR Detector runs at 5 GHz and 2.4 GHz on an 802.11n network that increases signal clarity - resulting in fast data transfer speed.

  • Battery:
    The battery lasts approximately 6.5 hours and takes less than 3 hours to charge. The battery can be charged in the unit with the wired option (sold separately). An accessory battery charger (sold separately) can additionally charge up to 2 batteries at a time so a fresh battery can be continuously available. The control console includes a battery indicator for image count and power level monitoring. Additional batteries (sold separately) are also available.

  • CXDI Control Software NE:
    The CXDI-801C Wireless DR System uses the Canon CXDI Control Software NE. The software gives a wide range of selections and images can be taken with three touches. An on-screen preview image is available approximately 1-2 seconds after exposure. The image processing shows subtle details of trabecular bone structure and soft tissue in the same image. For more information, visit our CXDI Control Software NE webpage.

This is to make Misc appear on the page when needed.

DISCLAIMERS


Images are simulated.

† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.

 Return to Top