CANON U.S.A.,Inc. MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
CANON U.S.A.,Inc. SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
I have read and understand the information above, and wish to download the designated software.
3D Machine Vision System
Canon Store: $
- High Speed Image Recognition of Target Parts
- Simple and Easy Preparation with CAD data and Image File
- One-time Measurement of 3D Pose (Position and Orientation :6 DOF)
- RV1100+ Option Measurement Field Expansion
H x W x D
|340 x 340 x 100 mm
(13.4” x 13.4” x 3.9”)
|540 x 540 x 200 mm
(21.3” x 21.3” x 7.9”)
|1160 x 1160 x 600 mm
(45.7” x 45.7” x 23.6”)
|See the red framed trapezoid area.|
Minimum recognizable part size
|10 × 10 mm
(0.39” x 0.39”)
|20 × 20 mm
(0.79” x 0.79”)
|45 × 45 mm
(1.77” x 1.77”)
|50 × 50 mm
(1.97” x 1.97”)
Recognition time *
|1.8 sec||1.8 sec||2.5 sec||2.5 sec|
Dimension of 3D Machine Vision Head
|252 x 206 x 129 mm (9.9” x 8.1” x 4.9”)|
Weight of 3D Machine Vision Head
|6.5 kg (14.3 lb)|
|Equivalent to IP54|
|0 – 45°C (32 – 113°F)|
* The time is measured by using an eyebolt M30 for RV1100, an eyebolt M12 for RV500 and an eyebolt M8 for RV300 as a target work, and setting the default measurement modes and the default recognition parameters. (Measurement period may vary depending on target work, measurement modes and recognition parameters.)
Canon’s advanced 3D Machine Vision guides a robot to pick and place resin molded printer parts which are randomly piled in mass production line.
Using a single captured image, this option enables position and orientation recognition of work pieces piled in multiple pallets.
This option enables consecutive recognition upon confirming that the pile state remains unchanged after each work piece has been picked.
This option enables the creation of dictionaries, required for the recognition of new work pieces, on a PC other than the PC connected to the 3-D Machine Vision Head.
Using partial CAD data, this option enables recognition of parts even for large work pieces that extend beyond the measurement range.
This option enables measurements from multiple locations by moving a slider-equipped 3-D Machine Vision Head.
RV1100+ Option MEASUREMENT FIELD EXPANSION
Canon has introduced new RV1100+ Option to support pallets larger than the current measurement field of RV1100 to meet wide-ranging part-provision needs of production lines.
With RV1100+ Option, the measurement field expands by 71.4% compared to that of RV1100. It allows to use much larger pallets yet still guarantees accuracy and calibrations within the expanded area.
Contact Super Machine Vision Products
To submit your contact information in a Request Form for support, service, and product inquires, use link below:
Otherwise, please contact one of our Regional Offices below for additional information.
Canon U.S.A., Inc.
Industrial Products Division
3300 North First Street
San Jose, CA 95134
Tel: (408) 468-5999
Fax: (408) 468-2219
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.