CANON U.S.A.,Inc. MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
CANON U.S.A.,Inc. SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
I have read and understand the information above, and wish to download the designated software.
EOS Rebel T6 EF-S 18-55mm IS II Kit
Digital, AF/AE single-lens reflex camera with built-in flash
SD, SDHC and SDXC Memory Cards
Not compliant to UHS-I (Ultra High Speed) standards.
Compatible with Eye-Fi Cards.
Multimedia cards (MMC) cannot be used. (A card error will be displayed.)
Approx. 22.3mm x 14.9mm
Canon EF Lenses (including EF-S lenses, excluding EF-M lenses)
Canon EF mount
Effective pixels: Approx. 18.00 megapixels
Total pixels: Approx. 18.70 megapixels
Approx. 4.30 µm square
3:2 (Horizontal : Vertical)
Color Filter System
RGB primary color filters
Low Pass Filter
Fixed position in front of the image sensor
Dust Deletion Feature
- Dust Delete Data acquisition and appending
- The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images.
- The dust coordinate data appended to the image is used by the provided software to automatically erase the dust spots.
- Self Cleaning Sensor Unit not provided.
Design Rule for Camera File System 2.0 and EXIF 2.3
Large: Approx. 17.90 Megapixels (5184 x 3456)
Medium: Approx. 8.00 Megapixels (3456 x 2304)
Small 1: Approx. 4.50 Megapixels (2592 x 1728)
Small 2: Approx. 2.50 Megapixels (1920 x 1280)
Small 3: Approx. 0.35 Megapixels (720 x 480)
RAW: Approx. 17.90 Megapixels (5184 x 3456)
The following three types of file numbering method can be set:
- Continuous numbering
- The numbering of captured images will continue even after you replace the card. (The numbering continues even when the folder changes.)
- When you replace the card, the numbering will be reset to start from 0001. If the new card already contains images, the numbering will continue from the last recorded image in the card.
- Rest the file number to 0001, and creates a new folder automatically.
sRGB, Adobe RGB
- User Defined 1-3
- In Basic Zone modes, Auto is set automatically.
- In Creative Zone modes, you can select and set the Picture Style.
- Default settings for [User Defined 1-3] are [Auto].
Auto White Balance
Auto white balance with the image sensor
Color Temperature Compensation
Blue/amber bias: ±9 levels
Magenta/green bias: ±9 levels
Corrected in reference to the current WB mode's color temperature.
Color Temperature Information Transmission
Eye-level single lens reflex (with fixed pentamirror)
Approx. 95% vertically and horizontally (with Eye point approx. 21mm)
Approx. 0.8x / 22.4° (-1m-1 (dpt) with 50mm lens at infinity)
Approx. 21 mm (At -1m-1 from the eyepiece lens center)
Dioptric Adjustment Correction
Adjustable from approx. -2.5 to +0.5 m-1 (dpt)
Quick-return half mirror (Transmittance: reflectance ratio of 40:60)
- AF information (AF points and focus confirmation)
- Exposure information (Shutter speed, aperture, ISO speed, AE lock, Exposure level, exposure warning)
- Flash information (Flash ready, flash exposure compensation, high-speed sync, FE lock, red-eye reduction light)
- Image information (Highlight tone priority, Monochrome shooting, maximum burst, white balance correction, SD card information)
Depth Of Field Preview
Enabled with Custom Function
TTL secondary image-forming phase-difference detection system with AF-dedicated CMOS sensor
Cross-type AF sensitive to f/5.6 with center AF point
AF Working Range
With One-Shot AF
EV 0-18 (center AF point)
EV 1-18 (other AF points)
(at room temperature and ISO 100, based on Canon's testing standards)
- One-Shot AF
- Predictive AI Servo AF
- AI Focus AF
- Switches between One-Shot AF and AI Servo AF automatically.
AF Point Selection
- Manual selection
- Auto selection
- AF point selection for Basic Zone modes is fixed to Automatic selection.
Selected AF Point Display
Indicated by superimposed display in the viewfinder and on the LCD monitor.
AF Assist Beam
Intermittent firing of built-in flash
Center: Approx. 13.1 ft. / 4.0m
Periphery: Approx. 11.5 ft. / 3.5m
With an EOS-dedicated Speedlite attached, the Speedlite's AF-assist beam is emitted instead.
Dual-layer metering sensor with the area divided into 63 zones.
- Evaluative metering (linked to all AF points)
- Partial metering at the center of the viewfinder (approx. 10% of viewfinder)
- Center-weighted average metering
EV 1-20 (room temperature, ISO 100, evaluative metering)
Exposure Control Systems
- Program AE (Shiftable)
- Shutter-priority AE
- Aperture-priority AE
- Manual exposure (including bulb)
- Scene Intelligent Auto (Program AE/non-shiftable)
- Flash Off
- Creative Auto
- Night Portrait
- Auto AE lock
- In the One-Shot AF mode with evaluative metering, AE lock takes effect when focus is achieved.
- In the P, Tv, Av, and M modes, enabled with the AE lock button. (Press again to update.)
- Enabled in all metering modes.
Vertical-travel shutter with electronic first-curtain control and mechanical second-curtain control
1/4000 to 30 sec., Bulb (Total shutter speed range)
X-sync at 1/200 sec.
Settable in 1/3- or 1/2-stop increments.
Soft-touch electromagnetic release
10-sec. or 2-sec. Delay
Shutter Lag Time
- During SW-1 ON, time lag between SW-2 ON and start of exposure: approx. 0.12 sec.
- Time lag between simultaneous SW-1/SW-2 ON and start of exposure: Approx. 0.24 sec.
Auto pop-up, retractable, built-in flash in the pentamirror
Flash Metering System
E-TTL II autoflash (Evaluative, Average), FE lock
Approx. 30.2 ft./9.2m (at ISO 100)
Approx. 2 sec.
Up to approx. 17mm focal length (equivalent to approx. 28mm in 135 format)
Flash Exposure Compensation
Up to ±2 stops in 1/3- or 1/2-stop increments
Flash exposure compensation for built-in flash and external Speedlite can be set with the camera.
E-TTL II autoflash (evaluative flash metering and average flash metering), FE lock
Flash Exposure Compensation
±2 stops in 1/3-stop or 1/2-stop increments
- Single shooting
- Continuous shooting
- Max. approx. 3.0 fps
- Shutter speed 1/500 sec., Maximum aperture
- Continuous shooting speed may become slower depending on the shutter speed, aperture, subject condition, brightness, lens kind, flash use, battery remaining capacity, etc.
- 2 to 10 shots
Continuous Shooting Speed
Max. approx. 3.0 fps
Evaluative metering (315-zone) AE lock possible. The active metering timer can be changed.
EV 0-20 (room temperature, ISO 100)
One of two types of grids can be selected and displayed on the screen.
- Grid 1:2 vertical and 2 horizontal lines
- Grid 2:5 vertical and 3 horizontal lines
Movie: MPEG4 AVC/H.264
* Variable (average) bit rate
Audio: Linear PCM
1920 x 1080 (30 fps/24 fps): 340 MB/min.
1280 x 720 (60 fps): 340 MB/min.
640 x 480 (30 fps): 90 MB/min.
1920 x 1080 (Full HD): 30 fps (29.97 fps) / 24 fps (23.98 fps)
1280 x 720 (HD): 60 fps (59.94 fps)
640 x 480 (SD): 30 fps (29.97 fps)
- Contrast AF
- Manual focus
- Magnify the image by 5x or 10x and focus manually.
Possible (±3 stops in 1/3-stop increments)
TFT color, liquid-crystal monitor
3.0-inch (Screen aspect ratio of 4:3)
Approx. 7.5cm diagonal (approx. 6.0cm wide, approx. 4.5cm high)
Approx. 920,000 dots
Approx. 170° vertically and horizontally
Adjustable to one of seven levels
25 (English, German, French, Dutch, Danish, Portuguese, Finnish, Italian, Norwegian, Swedish, Spanish, Greek, Russian, Polish, Czech, Hungarian, Romanian, Ukrainian, Turkish, Arabic, Thai, Simplified/Traditional Chinese, Korean, Japanese)
- Single image display
- Basic information
- Basic information + image quality / image file number
- Shooting information
- Histogram display
On the detailed information and histogram displays, highlight areas with no image data will blink.
When you press the Quick Control button while shooting images, you can set various functions. The functions that can be set vary depending on whether the shooting mode is viewfinder shooting, Live View shooting or movie shooting.
Erase protection can be applied or canceled for a single image, all images in a folder or all images in the card.
Erase unprotected image(s) with selection from Single image, Selected images, All images on folder or All images in a card.
RAW and JPEG images compliant to Design rule for Camera File System.
Movies cannot be printed.
Complies to DPOF Version 1.1
11 Custom Functions with 33 settings settable with the camera
Camera User Settings
My Menu Registration
Up to six kinds of function settings can be selected and registered from the Menu options or any of the top-tier menu options of Custom Functions.
Hi-Speed USB (USB 2.0)
For computer communication and PictBridge
For connection with the GPS receiver GP-E2
Video Out Terminal
HDMI Type C (Resolution switches automatically)
Video output: (Switches automatically to 1, 2, 3 or 4 to suit the TV set.)
Extension System Terminal
Compatible with Remote Switch RS-60E3
Canon cameras are not guaranteed to support Eye-Fi card functions, including wireless transfer. In case of an issue with the Eye-Fi card, please consult with the card manufacturer. The use of Eye-Fi cards may not be approved in all regions, or from one region to another; please contact the card manufacturer for status of approval in the country/region of use.
Battery Pack LP-E10 x 1
The camera can be powered by an AC power supply by using the household power outlet accessories (sold separately).
Automatic battery check when the power switch is turned ON.
Battery level indicated in one of the four levels on LCD monitor.
Power turns off after the set time of non-operation elapses
* [Auto power off] settable to 30 sec., 1 min., 2 min., 4 min., 8 min., 15 min. or disable
Built-in secondary battery
Maintains date/time for about 3 months when fully charged
Approx. 0.1 sec. (Based on CIPA testing standards)
Dimensions (W x H x D)
Approx. 5.08 x 3.99 x 3.06 in. / 129.0 x 101.3 x 77.6mmIn CIPA guidelines.
Approx. 17.11 oz. / 485g (In accordance with CIPA guidelines)Approx. 15.52 oz. / 440g (Body only)
Working Temperature Range
Working Humidity Range
85% or less
All data are based on Canon's Standard Test Method. Subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the lens maker.
Canon, DIGIC and EOS Rebel are registered trademarks of Canon Inc. in the United States and may also be registered trademarks or trademarks in other countries. Microsoft, Windows and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple, Inc., registered in the United States and other countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other products and brand names are registered trademarks, trademarks or service marks of their respective owners in the United States and/or other countries.
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.
Drivers & Downloads
EOS DIGITAL CAMERA LIMITED WARRANTY
For The U.S.A. And Canada Only
The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada Inc., (Canon Canada) in Canada with respect to the Canon brand EOS Digital Camera (the “Product”) *, when purchased and used in the United States or Canada. The Product purchased with this limited warranty is the only EOS Digital Camera to which this limited warranty applies.
Canon U.S.A., Inc. and Canon Canada Inc. (collectively "Canon") warrant to the original end-user purchaser, when delivered in new condition in its original container, that the Product will be free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of original purchase. Product returned to a Canon repair facility and proven to be defective upon inspection will, at Canon’s sole discretion and without charge, be (a) repaired utilizing new, remanufactured, repaired and/or recycled parts; (b) exchanged for a new Product or; (c) exchanged for a refurbished Product, as determined by the Canon repair facility. Warranty exchange or replacement does not extend the original warranty period of the Product.
THIS WARRANTY DOES NOT COVER ANY ACCESSORIES. This limited warranty shall only apply if the Product is used in conjunction with compatible computer equipment and compatible software, as to which items Canon U.S.A. or Canon Canada, shall have no responsibility. Non-Canon brand equipment and software that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon U.S.A. or Canon Canada, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with the respect to such non-Canon brand items is given by the manufacturer or producer thereof.
This limited warranty covers all defects encountered in normal use of the Product, and does not apply in the following cases:
- Loss of or damage to the Product due to abuse, mishandling, improper packaging by you, alteration, accident, electrical current fluctuations, failure to follow operating, maintenance or environmental instructions prescribed in Canon U.S.A.'s or Canon Canada's user's manual or services performed by someone other than Canon U.S.A. or Canon Canada, or a Canon authorized service provider for the Product. Without limiting the foregoing, water damage, sand/corrosion damage, battery leakage, dropping the Product, scratches, abrasions or damage to the body, lenses or LCD display or damage to the any of the accessories mentioned in the first paragraph above will be presumed to have resulted from misuse, abuse or failure to operate the Product as set forth in the operating instructions
- Use of parts or supplies (other than those sold by Canon U.S.A. or Canon Canada) that cause damage to the Product or cause abnormally frequent service calls or service problems
- If the Product has had its serial number or dating altered or removed.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND CANON U.S.A. OR CANON CANADA (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU)..NEITHER CANON U.S.A. NOR CANON CANADA SHALL BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE OR MISUSE OF, OR INABILITY TO USE, THE EOS DIGITAL CAMERA, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON U.S.A. OR CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR CANON CANADA BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY CANON USA OR CANON CANADA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR MISUSE OF, OR INABILITY TO USE, THE PRODUCT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA OR CANON CANADA (SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU). THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT, OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY.
You may obtain technical support** for your Product as follows:
E-mail support via our Web site at www.canontechsupport.com
Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666)
You may obtain technical support* for your Product as follows:
Telephone assistance from a Canon Canada Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666)
When you call, have your Product serial number and your date of purchase available to expedite service. A Canon Customer Care representative will attempt to diagnose the nature of the problem and correct it over the telephone. If the problem cannot be corrected over the telephone, you will be asked to follow the applicable procedures for MAIL-IN SERVICE. Note that a dated proof of purchase is required at the time of service. This requirement will be satisfied by providing a copy of your dated bill of sale.
** Technical support program specifics subject to change without notice.
MAIL-IN SERVICE is a program under which your Product is repaired by a Canon U.S.A. or a Canon Canada authorized service center for the Product. Authorized service center information can be obtained by visiting www.canontechsupport.com (US customers only) or by contacting the Canon U.S.A., Customer Care Center or Canon Canada Customer Information Centre at 1-800-OK-CANON (1-800-652-2666). You will be given the name, address and phone number of an authorized service center.
It is your responsibility to properly package and send the defective Product, together with a copy of your dated proof of purchase, a complete explanation of the problem and a return address to the authorized service center at your expense. Do not include any other items with the defective Product. The Product covered by this limited warranty and proven to be defective upon inspection will be repaired and returned to you without charge by the authorized service center. Any Product received by the authorized service center that is not covered by the limited warranty will be returned unrepaired, or at the discretion of the authorized service provider, you may receive a written estimate of repair at such cost as the service center may establish from time to time.
This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state (or province to province in Canada).
*The battery pack packaged with the Product carries a separate ninety (90) day limited warranty.
Compatible Supplies & Accessories
Canon offers a wide range of compatible supplies and accessories that can enhance your user experience with you EOS Rebel T6 EF-S 18-55mm IS II Kit that you can purchase direct. Scroll down to easily select items to add to your shopping cart for a faster, easier checkout. Visit the Canon Online Store
AC Adapter Kit ACK-E10
Allows you to power your cameras from a wall source. The kit includes: DC coupler to attach to the camera's battery port. AC adapter to convert the power. AC cord to plug into the wall.
Battery Charger LC-E10
Battery Pack LP-E10
Compatible with Canon LC-E10 battery charger.
DC Coupler DR-E10
Coupler fits inside the camera's battery compartment and attaches to the DC cord of the CA-PS700 AC adapter accessory.
Software Developers Kit General Information
Current SDK Versions as of April 13, 2016
EDSDK 3.4 for EOS digital cameras
- What are the Canon Digital Camera SDKs?
- Do the Canon Digital Camera SDKs replace the software supplied with my Canon digital camera?
- Who is eligible to apply for a Canon Digital Camera SDK?
- Canon Digital Camera SDK Application Procedures & License Agreement
- Canon Digital Camera SDK Distribution Methods
- Canon Digital Camera SDK Technical Support, Bug Reports & Feature Requests
- Canon Digital Camera SDK Compatibility Charts
- Canon Digital Camera SDK Compatibility Charts, System Requirements & Support Applications
1. What are the Canon Digital Camera SDKs?
SSDK stands for Software Development Kit. The SDKs for EOS Digital SLRs and PowerShot compact digital cameras are separate. There are two (2) current Canon Digital Camera SDK versions:
- EDSDK 3.4 Windows version for select EOS Digital SLRs
- EDSDK 3.4 Macintosh version for select EOS Digital SLRs
The Canon Digital Camera SDKs comprise a set of APIs, DLLs, and static link libraries that provide an interface for accessing Canon digital cameras and data generated by Canon digital cameras.
EDSDK 3.4 Windows and Macintosh version support remote control for some EOS cameras, RAW image conversion and downloading from select EOS Digital SLRs.
All Canon Digital Camera SDK versions are written in C. There are no current ActiveX versions.
The Digital Camera SDKs do not replace the software that was supplied with your Canon digital camera. If you have reached this page in error while looking for Canon digital camera software, please go to the following web page:
This page links to support pages for specific Canon digital cameras. On each digital camera support page, we provide a link to all Canon digital camera software available online for that model, including free updates for ZoomBrowser EX and ImageBrowser for customers who have installed earlier versions of these applications.
If you are a resident of the U.S. and you have misplaced or damaged your original software CD and wish to replace it, you may purchase the latest Canon Digital Camera Software Solutions disc for your camera through Canon USA's Customer Support Center at 1-800-OK-CANON (1-800-652-2666). Residents of other countries should contact their regional Canon customer support center for further assistance.
Software developers residing in North, Central and South America are eligible to apply for Canon Digital Camera SDKs through the Canon U.S.A., Inc. web site, i.e., this web site.
PLEASE NOTE: We are prohibited by Canon Inc. from distributing Digital Camera SDKs to developers residing outside our sales area. SDK applications received from developers residing outside our sales areas will be rejected.
European, African and Middle East-based developers are requested to register with Canon Europa at:
Australian and New Zealand-based developers are requested to contact Canon Australia at:
Developers based in India, Indonesia, Malaysia, Pakistan, the Philippines, Singapore and Thailand are requested to register with Canon Asia at:
Developers residing in countries other than those listed above are directed to contact their regional Canon office for information regarding SDK availability in their area.
The SDK application form is available to you after you read and agree to the terms of the Canon Digital Camera SDK License Agreement. Please be sure to fill out all required fields in the online application form with complete and accurate data if you wish to receive the SDK.
When you submit an SDK application, you get a registration confirmation screen informing you that your SDK application has been received and that it will be reviewed as soon as possible. Upon approval, you will receive downloading instructions via e-mail. Typically, approvals are issued within 1 to 2 business days after receipt. If the SDK application is not approved, we will attempt to send you an explanation by e-mail. If your SDK application is approved, you will be asked to accept the terms of the Canon Digital Camera SDK License Agreement before being permitted to download the SDK. Additionally, each time a new SDK is released, it is necessary to resubmit the SDK application online in order to receive the latest version of the Canon Digital Camera SDK. This new application also enables us to notify you of new versions of the SDK as they are released.
Current Canon Digital Camera SDKs are available for download to approved developers at our password-protected web site. If you have any difficulty accessing our web page or downloading the SDK after your approval, please let us know and we will be happy to send you a copy on CD-ROM.
Occasionally, there have been instances where our SDK approval notifications have not been received because they were blocked by the recipient's e-mail spam filter. In such cases, we don't know about it unless it's reported. To ensure reception of your SDK approval notification, please register the following e-mail address in your e-mail system's list of approved contacts:
Developers who've experienced difficulties downloading the SDKs on the Windows platform through Microsoft's Internet Explorer browser have reported successful results with Firefox and Safari browsers.
Please note that as per the current SDK License Agreement, the Canon Digital Camera SDKs are offered as is, without technical support. However, the current SDKs are provided with written documentation as well as several tutorials and sample files.
Bug reports or new feature requests for the Canon Digital Camera SDKs should be submitted via e-mail to:
Only the following cameras are supported:
RAW development: 64bit-OSs
- EOS-1D X Mark II / EOS 80D / EOS Rebel T6 / EOS M10 / EOS 5DS / EOS 5DS R / EOS Rebel / EOS Rebel T6i / EOS M3
RAW development: 32bit-OSs, Remote function: 64bit-OSs/32bit-OSs
- EOS-1D X Mark II / EOS 80D / EOS Rebel T6 / EOS M10*
- EOS 5DS / EOS 5DS R / EOS REBEL T6s / EOS REBEL T6i / EOS M3*
- EOS-1D C / EOS M* / EOS 6D / EOS M2* / EOS 7D Mark II
- EOS-1D X / 1D Mark III / 1Ds Mark III / 1D Mark IV
- EOS 40D / 50D / 5D Mark II / 5D Mark III / 7D / 60D / 60Da / 70D
- Rebel XSi
- Rebel XS
- Rebel T1i
- Rebel T2i
- Rebel T3i
- Rebel T4i
- Rebel T3
- Rebel T5i
- Rebel SL1
- Rebel T5
(*) In the case of EOS M, EOS M2, EOS M3, and EOS M10 remote shooting function is not supported.
SDK's Name: Canon EOS Digital SDK (EDSDK) v3.4 for Windows
System Requirements: Windows:
Pentium 1.3GHz or higher Pentium processor
At least 1GB RAM
SDK's Name: Canon EOS Digital SDK (EDSD) v3.4 for Macintosh
System Requirements: Macintosh:
At least 1GB RAM
OS: Mac OS X 10.9 - 10.11