CANON U.S.A.,Inc. MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
CANON U.S.A.,Inc. SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
I have read and understand the information above, and wish to download the designated software.
EOS M EF-M 22mm STM Kit
Drivers & Downloads
EOS DIGITAL CAMERA LIMITED WARRANTY
For The U.S.A. And Canada Only
The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada Inc., (Canon Canada) in Canada with respect to the Canon brand EOS Digital Camera (the “Product”) *, when purchased and used in the United States or Canada. The Product purchased with this limited warranty is the only EOS Digital Camera to which this limited warranty applies.
Canon U.S.A., Inc. and Canon Canada Inc. (collectively "Canon") warrant to the original end-user purchaser, when delivered in new condition in its original container, that the Product will be free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of original purchase. Product returned to a Canon repair facility and proven to be defective upon inspection will, at Canon’s sole discretion and without charge, be (a) repaired utilizing new, remanufactured, repaired and/or recycled parts; (b) exchanged for a new Product or; (c) exchanged for a refurbished Product, as determined by the Canon repair facility. Warranty exchange or replacement does not extend the original warranty period of the Product.
THIS WARRANTY DOES NOT COVER ANY ACCESSORIES. This limited warranty shall only apply if the Product is used in conjunction with compatible computer equipment and compatible software, as to which items Canon U.S.A. or Canon Canada, shall have no responsibility. Non-Canon brand equipment and software that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon U.S.A. or Canon Canada, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with the respect to such non-Canon brand items is given by the manufacturer or producer thereof.
This limited warranty covers all defects encountered in normal use of the Product, and does not apply in the following cases:
- Loss of or damage to the Product due to abuse, mishandling, improper packaging by you, alteration, accident, electrical current fluctuations, failure to follow operating, maintenance or environmental instructions prescribed in Canon U.S.A.'s or Canon Canada's user's manual or services performed by someone other than Canon U.S.A. or Canon Canada, or a Canon authorized service provider for the Product. Without limiting the foregoing, water damage, sand/corrosion damage, battery leakage, dropping the Product, scratches, abrasions or damage to the body, lenses or LCD display or damage to the any of the accessories mentioned in the first paragraph above will be presumed to have resulted from misuse, abuse or failure to operate the Product as set forth in the operating instructions
- Use of parts or supplies (other than those sold by Canon U.S.A. or Canon Canada) that cause damage to the Product or cause abnormally frequent service calls or service problems
- If the Product has had its serial number or dating altered or removed.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND CANON U.S.A. OR CANON CANADA (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU)..NEITHER CANON U.S.A. NOR CANON CANADA SHALL BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE OR MISUSE OF, OR INABILITY TO USE, THE EOS DIGITAL CAMERA, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON U.S.A. OR CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR CANON CANADA BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY CANON USA OR CANON CANADA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR MISUSE OF, OR INABILITY TO USE, THE PRODUCT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA OR CANON CANADA (SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU). THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT, OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY.
You may obtain technical support** for your Product as follows:
E-mail support via our Web site at www.canontechsupport.com
Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666)
You may obtain technical support* for your Product as follows:
Telephone assistance from a Canon Canada Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666)
When you call, have your Product serial number and your date of purchase available to expedite service. A Canon Customer Care representative will attempt to diagnose the nature of the problem and correct it over the telephone. If the problem cannot be corrected over the telephone, you will be asked to follow the applicable procedures for MAIL-IN SERVICE. Note that a dated proof of purchase is required at the time of service. This requirement will be satisfied by providing a copy of your dated bill of sale.
** Technical support program specifics subject to change without notice.
MAIL-IN SERVICE is a program under which your Product is repaired by a Canon U.S.A. or a Canon Canada authorized service center for the Product. Authorized service center information can be obtained by visiting www.canontechsupport.com (US customers only) or by contacting the Canon U.S.A., Customer Care Center or Canon Canada Customer Information Centre at 1-800-OK-CANON (1-800-652-2666). You will be given the name, address and phone number of an authorized service center.
It is your responsibility to properly package and send the defective Product, together with a copy of your dated proof of purchase, a complete explanation of the problem and a return address to the authorized service center at your expense. Do not include any other items with the defective Product. The Product covered by this limited warranty and proven to be defective upon inspection will be repaired and returned to you without charge by the authorized service center. Any Product received by the authorized service center that is not covered by the limited warranty will be returned unrepaired, or at the discretion of the authorized service provider, you may receive a written estimate of repair at such cost as the service center may establish from time to time.
This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state (or province to province in Canada).
*The battery pack packaged with the Product carries a separate ninety (90) day limited warranty.
Digital single-lens non-reflex, AF/AE camera
SD card, SDHC card, SDXC memory card
* Compatible with Ultra High Speed (UHS-I) and Eye-Fi Cards.
22.3 x 14.9 mm (APS-C size)
Canon EF-M lenses, Canon EF lenses including EF-S lenses
(35mm-equivalent focal length is approx.1.6x the lens focal length)
Canon EF-M mount (Canon EF-M lenses can be mounted directly to the camera. Canon EF lenses (including EF-S lenses) can be attached by using the optional Mount Adapter EF-EOS M.)
Effective pixels: Approx. 18.0 megapixels
4.3 µm square
Total pixels: Approx. 18.50 megapixels
3:2 (Horizontal : Vertical)
Color Filter System
RGB primary color filters
Low Pass Filter
Fixed position in front of the CMOS sensor
Dust Deletion Feature
(1) Self Cleaning Sensor Unit
- Removes dust adhering to the low-pass filter.
- Self-cleaning executed automatically (taking approx. 2 sec.) when power is turned on or off. Manual execution also possible (taking approx. 5 sec.).
(2) Dust Delete Data acquisition and appending
- The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images.
- The dust coordinate data appended to the image is used by the provided software to automatically erase the dust spots.
Complies with Design rule for Camera File system 2.0 and Exif 2.30
(1) Large: Approx. 17.90 Megapixels (5,184 x 3,456)
(2) Medium: Approx. 8.00 Megapixels (3,456 x 2,304)
(3) Small 1: Approx. 4.50 Megapixels (2,592 x 1,728)
(4) Small 2: Approx. 2.50 Megapixels (1920 x 1280)
(5) Small 3: Approx. 350,000 Pixels (720 x 480)
(6) RAW: Approx. 17.90 Megapixels (5,184 x 3,456)
The following three types of file numbering method can be set:
(1) Continuous numbering
* The numbering of captured images will continue even after you replace the camera's card.
(2) Auto reset
* When you replace the camera's card, the numbering will be reset to start from 0001. If the new card already contains images, the numbering will continue from the last recorded image in the card.
(3) Manual reset
* Resets the file number to 0001, and creates a new folder automatically.
RAW + JPEG Simultaneous Recording
RAW and JPEG Large images are recorded simultaneously
sRGB, Adobe RGB
Auto, Standard, Portrait, Landscape, Neutral, Faithful, Monochrome, User Defined 1-3
Auto (Approx. 3,000° - 7,000°K), Daylight (Approx. 5,200°K), Shade (Approx. 7,000°K), Cloudy, Twilight and Sunset (Approx. 6,000°K), Tungsten Light (Approx. 3,200°K), White Fluorescent Light (Approx. 4,000°K), Flash, Custom (Custom White Balance: Approx. 2,000° - 10,000°K)
Auto White Balance
Auto white balance with the image sensor
Color Temperature Compensation
White balance correction:Blue/amber bias: ±9 levels Magenta/green bias: ±9 levels* Correction based on the current WB mode's color temperature.
Color Temperature Information Transmission
TTL-CT-SIR AF-dedicated CMOS sensor
31 points (maximum)
AF Working Range
EV 1 to 18 (at 73°F/23°C, ISO 100)
With Canon EF-M Lenses:
- One-Shot AF or Servo AF
(2) Manual focus (MF)
(3) AF + MF (manual focus after One-Shot AF)
AF Point Selection
(1) Manual selection
(2) Auto selection
* Automatically set in Basic Zone modes.
Selected AF Point Display
AF Assist Beam
Effective range: Approx. 8.2 ft./ 2.5m. at center
* With an EOS-dedicated Speedlite attached, the Speedlite's AF-assist beam is emitted instead.
* Compatible with assist beam (intermittent firing) of 320EX flash.
Real-time evaluative metering with image sensor
Evaluative metering, partial metering (center: approx. 11%), spot metering (center: approx. 2.8%), center-weighted average metering
* AE lock possible. The active metering time can be changed.
EV 1.0 - EV 20.0 (at 73°F/23°C, EF-M 22mm f/2 STM, ISO 100)
Exposure Control Systems
(1) Program AE (shiftable)
(2) Shutter-priority AE
(3) Aperture-priority AE
(4) Manual exposure (including bulb)Basic zone
(1) Creative Auto
(6) Night Portrait
(7) Handheld Night Scene mode
(8) HDR Backlight Control mode
ISO Speed Range
Manual Setting range of ISO 100-6400, expandable to ISO 12800
1. Manual setting range of ISO 100-12800, expansion to ISO 25600
2. Auto, ISO 100-6400 (in whole-stop increments)
- In Creative Zone modes, the maximum ISO speed (ISO 400, 800, 1600, 3200, or 6400) for ISO Auto can be set.
- With C.Fn-6-1 (Highlight tone priority), ISO 200 or higher will be set.
*1: Fixed at ISO 400 for Bulb exposures.
*2: Depends on the maximum ISO speed that has been set.
*3: If fill-flash will result in overexposure, the lowest ISO 100 is set.
*4: When using bounce flash with an external Speedlite in a Basic Zone mode or P mode, the ISO speed is set automatically within 400–1600 (or the maximum limit).
Manual: ±3 stops in 1/3- or 1/2-stop increments
AEB : ±2 stops in 1/3- or 1/2-stop increments
* Manual exposure compensation and AEB can be set in combination.
* AEB is set in the following sequence: Standard exposure, decreased exposure, and increased exposure.
* If AEB is used with the self-timer, the three bracketed shots will be taken in succession after the 10-sec. or 2-sec. delay.
(1) Auto AE lock
* In the One-Shot AF mode with evaluative metering, AE lock takes effect when focus is achieved.
(2) Manual AE lock
* In the P, Tv, Av, and M modes, enabled with the AE lock button. (Press again to update.)
* Enabled in all metering modes.
Vertical-travel, mechanical, focal-plane shutter with all speeds electronically-controlled
1/4000 to 1/60 sec., X-sync at 1/200 sec. (Scene Intelligent Auto)
1/4000 to 30 sec., bulb, X-sync at 1/200 sec. (Total shutter speed range. Available range varies by shooting mode.)
* Settable in 1/3- or 1/2-stop increments.
Soft-touch electromagnetic release
10-sec. or 2-sec. delay
Shutter Lag Time
(1) During SW-1 ON, time lag between SW-2 ON and start of exposure: Approx. 0.05 sec.
(2) Time lag between simultaneous SW-1/SW-2 ON and start of exposure: Approx. 0.2 sec.
* Time lag with the aperture stopped down by 3 stops or less. Excludes AF operation time.
*For flash photography, Speedlite flashes are required for the EOS M Digital Camera.
E-TTL II autoflash (evaluative flash metering and average flash metering), FE Lock
Flash Exposure Compensation
±2 stops in 1/3-stop or 1/2-stop increments
Single, Continuous, 10-sec. self-timer/Remote control, 2-sec. self-timer, Continuous shooting after 10-sec. self-timer (2 to 10 shots)
Continuous Shooting Speed
With One-Shot AF or MF: Approx. 4.3 fps*
*With Servo AF during continuous shooting, there are limitations depending on AF operation and the attached lenses.
With One-Shot AF or MF: Approx. 4.3 fps∗
∗With Servo AF during continuous shooting, there are limitations depending on AF operation and the attached lenses.∗1AF frame is fixed in frame chosen by [Face Detect + Tracking] and [FlexiZone - Multi] at the time of continuous shooting mode, and AF is carried out for the chosen AF frame.
Based on 8GB memory Card*1:
JPEG Large/Fine: Approx. 15 Shots
RAW: Approx. 6 Shots
RAW+JPEG Large/Fine: 3 Shots
Based on UHS-I 8GB memory card*2:
JPEG Large/Fine: Approx. 17 Shots
RAW: Approx. 6 Shots
RAW + JPEG Large/Fine: 3 Shots
*1 Figures are based on Canon's testing standards (ISO 100 and Standard Picture style)
*2 Figures are based on Canon's testing standards (ISO 100 and Standard Picture style)
Photo shooting and video shooting
- Face Detection + Tracking AF
- FlexiZone - Multi (31 zones, AF at the touched Zone)
- FlexiZone - Single
Evaluative metering, partial metering, spot metering, center-weighted average metering
EV 1 - EV 20 (At 73°F/23°C, EF-M 22mm f/2 STM, ISO 100)
Provided (Two-type grid displays)
MOV (Image data: H.264; audio: Linear PCM (Stereo))
1920 x 1080: 330 MB/min.
1280 x 720: 330 MB/min.
640 x 480: 82.5 MB/min.
1920 x 1080 (Full HD): 30p (29.97) / 24p (23.976) / 25p
1280 x 720 (HD): 60p (59.94) / 50p
640 x 480 (SD): 30p (29.97) / 25p
Continuous Shooting Time
Based on 8GB Memory card
[1920 x 1080]
30 fps: Approx. 22 min.
25 fps: Approx. 22 min.
24 fps: Approx. 22 min.[1280 x 720]
60 fps: 22 min.
50 fps: 22 min.[640 x 480]
30 fps: 1 hr. 32 min.
25 fps: 1 hr. 32 min.
Based on 16GB Memory card
[1920 x 1080]
30 fps: Approx. 44 min.
25 fps: Approx. 44 min.
24 fps: Approx. 44 min.[1280 x 720]
60 fps: 44 min.
50 fps: 44 min.[640 x 480]
30 fps: 3 hr. 4 min.
25 fps: 3 hr. 4 min.
1. Face Detection + Tracking AF
2. FlexiZone - Multi
3. FlexiZone - Single
Auto ISO range: ISO 100-6400
Manual ISO range: ISO 100-6400 (expandable to 12800 in H mode)
*If highlight tone priority is set, automatically set within ISO 200 or higher.
(1) Movie autoexposure mode
* Shutter speed 1/30 - 1/4000 sec. (Signal accumulation time), aperture, and ISO speed automatically set.
(2) Movie manual exposure mode
* Shutter speed (signal accumulation time), aperture, and ISO speed (auto/manual) manually set. The shutter speed (signal accumulation time) is limited to 1/4000 sec. at the maximum and to 1/30 sec. at the minimum for 24/25/30 fps or 1/60 sec. or higher for 50/60 fps.
Provided (±3 stops in 1/3-stop increments)
* For video, exposure compensation will not be applied beyond ±3 stops even if the exposure compensation has been set beyond ±3 stops.
TFT color, liquid-crystal monitor with Touch Panel LCD (capacitive type)
3.0 in. (Screen aspect ratio of 3:2)
Approx. 1,040,000 dots
Viewing Angle: 170° (vertically and horizontally)
Adjustable to one of 7 levels
25 (English, German, French, Dutch, Danish, Portuguese, Finnish, Italian, Norwegian, Swedish, Spanish, Greek, Russian, Polish, Czech, Hungarian, Romanian, Ukraine, Turkish, Arabic, Thai, Simplified/Traditional Chinese, Korean, Japanese)
(1) Single image display
- Single image, basic information, detailed information, histogram display
(2) Index display
4-image index and 9-image index.
(3) Jump display (Image jump w/ Main Dial)
1/10/100 images, shooting date, by folder, videos, stills, ratings
On the detailed information and histogram displays, highlight areas with no image data will blink.
When you press the Quick Control function button under the following conditions, you can set the functions below:
*The settable functions depend on the shooting mode(1) During still photo shooting:
AF operation, AF method, image-recording quality, Creative filters, white balance, Picture Style, Auto Lighting Optimizer, and metering mode.(2) During movie shooting:
AF method, image-recording quality (stills), movie-recording size, video snapshot, white balance, Picture Style, and Auto Lighting Optimizer.
Erase protection can be applied/canceled for a single image, all images in a folder, or all images in the card.
Erase single image, erase selected images, erase all images on folder, erase all images in a card, or erase only unprotected images.
JPEG images complying to Design rule for Camera File System RAW images printable. Video cannot be printed.
DPOF print ordering provided (Complies to DPOF Version 1.1)
* If both Standard and Index are set, only Standard will take effect for printing.
Seven Custom Functions with 19 settings settable with the camera
My Menu Registration
Up to six top-tier menu options and Custom Function settings can be registered
For personal computer communication and direct printing (USB 2.0 Hi-Speed)
Video Out Terminal
(1) Video OUT terminal: NTSC/PAL selectable
(2) mini-HDMI OUT terminal
Extension System Terminal
One Battery Pack LP-E12
* With the AC Adapter Kit ACK-E12, AC power is possible.
1) Camera Battery Pack LP-E12
Automatic battery level check when power is turned ON.
Battery level indicated in one of four levels on LCD monitor.
Power turns off after the set time of non-operation elapses
* [Auto power off] settable to 30 sec., 1 min., 2 min., 4 min., 8 min., 15 min. or disable
Built-in secondary battery. When fully-charged, the date/time can be maintained for about three months.
Approx. 1.6 sec. with EF-M 18-55mm f/3.5-5.6 IS STM* (Based on CIPA standards)
*The times are different according to the attached lens.
Dimensions (W x H x D)
Approx. 4.28 x 2.62 x 1.27 in./ 108.6 x 66.5 x 32.3mm
Approx. 9.2 oz. / 262g (body only)
Approx. 10.5 oz. / 298g (According to CIPA Standards)
Working Temperature Range
Working Humidity Range
85% or less
All data are based on Canon's Standard Test Method. Subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the lens maker.
Canon, DIGIC and EOS Rebel are registered trademarks of Canon Inc. in the United States and may also be registered trademarks or trademarks in other countries. Microsoft, Windows and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple, Inc., registered in the United States and other countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other products and brand names are registered trademarks, trademarks or service marks of their respective owners in the United States and/or other countries.
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.
Product Advisories for EOS M EF-M 22mm STM Kit
|Firmware Notice: EOS M: Firmware Version 2.0.2||Firmware Notice||Jun 26, 2013|
|Service Notice: When using certain lenses with certain cameras, lens aberration correction does not work.||Service Notice||Sep 28, 2016|
Compatible Supplies & Accessories
Canon offers a wide range of compatible supplies and accessories that can enhance your user experience with you EOS M EF-M 22mm STM Kit that you can purchase direct. Scroll down to easily select items to add to your shopping cart for a faster, easier checkout. Visit the Canon Online Store
43mm Protect Filter
These filters can help protect your lens against dust, moisture, fingerprints, scratches and damage and can be kept on your lens at all times. Filter fits select lenses with a 43mm diameter.
AC Adapter Kit ACK-E12
Allows the camera to be powered from a standard AC outlet. The kit includes CA-PS700 Compact Power Adapter and DR-E12 DC Coupler.
Battery Charger LC-E12
Wall battery charger compatible with battery pack LP-E12.
Battery Pack LP-E12
Battery pack for EOS M allows up to 1hr 30 min. of movie shooting time and approximately 230 shots (at 73o/23oC).
Camera Cover R-F-4
Protects camera mount when the lens is not attached.
Deluxe Tripod 300
The Canon Deluxe Tripod 300 was designed for ease of portability when traveling and maximum stability when used in any situation with a compatible Canon digital camera. The Deluxe Tripod 300 features a 3 way pan head for precise control while the 3 section tubular leg construction allows enhanced stability indoors and outdoors. The three-section Deluxe Tripod 300 reaches a maximum height of 62" and folds down to 23" and has a maximum load capacity is 4.4 lb.
Mini-HDMI Cable: connects Canon HD Camcorders/select PowerShot Cameras to HDMI compatible TV.
Lens Cap E-43
Lens Cap for lenses with a 43mm filter diameter.
Lens Hood EW-43
Lens Hood for EF-M 22mm F2 STM lens.
The Canon Monopod 500 is a compact, lightweight 5-section monopod that comes with a mini-ballhead. It features a foam grip on the top leg section, a hand strap, flip lock leg sections, and rubber leg tip. Maximum height of 64.5" extended and folded length of 21.9". Load capacity of 8.5 pounds. Weight of 1.1 pounds.
Mount Adapter EF-EOS M
Allows Canon EF and EF-S lenses to be mounted on the Canon EOS M digital camera. Fully compatible with all lens functions including image stabilization and autofocus. Detachable tripod adapter provides support for longer Canon lenses.
Remote Control RC-6
Allows for wireless camera operation and shutter release with the Canon T2i, T1i, 5D, 7D, and Mark II Cameras.
Speedlite Transmitter ST-E3-RT
Newly designed wireless system uses 2-way radio wave communication for enhanced communication among master and slave units Achieves a transmission distance of up to 98.4 ft. / 30m, all at a 360 degree angle Up to 5 groups, or 15 individual flashes can be controlled via 1 transmitter Supports E-TTL II flash, manual flash, stroboscopic and external flash metering
USB Cable IFC-200U
The Canon IFC-200U USB Interface Cable enables you to transfer your camera pictures to a computer fast. The cable connects to your camera and to the USB port on your PC or MAC Computer. Comes standard with the EOS 1Ds Mark III, 1D Mark IV, 1D Mark III, 5D Mark II, 7D, 60D, 50D, 40D, Rebel T2i, Rebel T1i, Rebel XSi and Rebel XS. Please see Compatibility tab for compatible models.
Software Developers Kit General Information
Current SDK Versions as of April 13, 2016
EDSDK 3.4 for EOS digital cameras
- What are the Canon Digital Camera SDKs?
- Do the Canon Digital Camera SDKs replace the software supplied with my Canon digital camera?
- Who is eligible to apply for a Canon Digital Camera SDK?
- Canon Digital Camera SDK Application Procedures & License Agreement
- Canon Digital Camera SDK Distribution Methods
- Canon Digital Camera SDK Technical Support, Bug Reports & Feature Requests
- Canon Digital Camera SDK Compatibility Charts
- Canon Digital Camera SDK Compatibility Charts, System Requirements & Support Applications
1. What are the Canon Digital Camera SDKs?
SSDK stands for Software Development Kit. The SDKs for EOS Digital SLRs and PowerShot compact digital cameras are separate. There are two (2) current Canon Digital Camera SDK versions:
- EDSDK 3.4 Windows version for select EOS Digital SLRs
- EDSDK 3.4 Macintosh version for select EOS Digital SLRs
The Canon Digital Camera SDKs comprise a set of APIs, DLLs, and static link libraries that provide an interface for accessing Canon digital cameras and data generated by Canon digital cameras.
EDSDK 3.4 Windows and Macintosh version support remote control for some EOS cameras, RAW image conversion and downloading from select EOS Digital SLRs.
All Canon Digital Camera SDK versions are written in C. There are no current ActiveX versions.
The Digital Camera SDKs do not replace the software that was supplied with your Canon digital camera. If you have reached this page in error while looking for Canon digital camera software, please go to the following web page:
This page links to support pages for specific Canon digital cameras. On each digital camera support page, we provide a link to all Canon digital camera software available online for that model, including free updates for ZoomBrowser EX and ImageBrowser for customers who have installed earlier versions of these applications.
If you are a resident of the U.S. and you have misplaced or damaged your original software CD and wish to replace it, you may purchase the latest Canon Digital Camera Software Solutions disc for your camera through Canon USA's Customer Support Center at 1-800-OK-CANON (1-800-652-2666). Residents of other countries should contact their regional Canon customer support center for further assistance.
Software developers residing in North, Central and South America are eligible to apply for Canon Digital Camera SDKs through the Canon U.S.A., Inc. web site, i.e., this web site.
PLEASE NOTE: We are prohibited by Canon Inc. from distributing Digital Camera SDKs to developers residing outside our sales area. SDK applications received from developers residing outside our sales areas will be rejected.
European, African and Middle East-based developers are requested to register with Canon Europa at:
Australian and New Zealand-based developers are requested to contact Canon Australia at:
Developers based in India, Indonesia, Malaysia, Pakistan, the Philippines, Singapore and Thailand are requested to register with Canon Asia at:
Developers residing in countries other than those listed above are directed to contact their regional Canon office for information regarding SDK availability in their area.
The SDK application form is available to you after you read and agree to the terms of the Canon Digital Camera SDK License Agreement. Please be sure to fill out all required fields in the online application form with complete and accurate data if you wish to receive the SDK.
When you submit an SDK application, you get a registration confirmation screen informing you that your SDK application has been received and that it will be reviewed as soon as possible. Upon approval, you will receive downloading instructions via e-mail. Typically, approvals are issued within 1 to 2 business days after receipt. If the SDK application is not approved, we will attempt to send you an explanation by e-mail. If your SDK application is approved, you will be asked to accept the terms of the Canon Digital Camera SDK License Agreement before being permitted to download the SDK. Additionally, each time a new SDK is released, it is necessary to resubmit the SDK application online in order to receive the latest version of the Canon Digital Camera SDK. This new application also enables us to notify you of new versions of the SDK as they are released.
Current Canon Digital Camera SDKs are available for download to approved developers at our password-protected web site. If you have any difficulty accessing our web page or downloading the SDK after your approval, please let us know and we will be happy to send you a copy on CD-ROM.
Occasionally, there have been instances where our SDK approval notifications have not been received because they were blocked by the recipient's e-mail spam filter. In such cases, we don't know about it unless it's reported. To ensure reception of your SDK approval notification, please register the following e-mail address in your e-mail system's list of approved contacts:
Developers who've experienced difficulties downloading the SDKs on the Windows platform through Microsoft's Internet Explorer browser have reported successful results with Firefox and Safari browsers.
Please note that as per the current SDK License Agreement, the Canon Digital Camera SDKs are offered as is, without technical support. However, the current SDKs are provided with written documentation as well as several tutorials and sample files.
Bug reports or new feature requests for the Canon Digital Camera SDKs should be submitted via e-mail to:
Only the following cameras are supported:
RAW development: 64bit-OSs
- EOS-1D X Mark II / EOS 80D / EOS Rebel T6 / EOS M10 / EOS 5DS / EOS 5DS R / EOS Rebel / EOS Rebel T6i / EOS M3
RAW development: 32bit-OSs, Remote function: 64bit-OSs/32bit-OSs
- EOS-1D X Mark II / EOS 80D / EOS Rebel T6 / EOS M10*
- EOS 5DS / EOS 5DS R / EOS REBEL T6s / EOS REBEL T6i / EOS M3*
- EOS-1D C / EOS M* / EOS 6D / EOS M2* / EOS 7D Mark II
- EOS-1D X / 1D Mark III / 1Ds Mark III / 1D Mark IV
- EOS 40D / 50D / 5D Mark II / 5D Mark III / 7D / 60D / 60Da / 70D
- Rebel XSi
- Rebel XS
- Rebel T1i
- Rebel T2i
- Rebel T3i
- Rebel T4i
- Rebel T3
- Rebel T5i
- Rebel SL1
- Rebel T5
(*) In the case of EOS M, EOS M2, EOS M3, and EOS M10 remote shooting function is not supported.
SDK's Name: Canon EOS Digital SDK (EDSDK) v3.4 for Windows
System Requirements: Windows:
Pentium 1.3GHz or higher Pentium processor
At least 1GB RAM
SDK's Name: Canon EOS Digital SDK (EDSD) v3.4 for Macintosh
System Requirements: Macintosh:
At least 1GB RAM
OS: Mac OS X 10.9 - 10.11