English | Spanish | German | French | Italian | Japanese | Korean | Portuguese | Russian | Chinese
Modifications from Ver.1.13 to Ver.1.14
1. AutoCAD2016/AutoCADLT2016/DWGTrueView2016 have been supported.
Modifications from Ver.1.12 to Ver.1.13
1. AutoCAD2015/AutoCADLT2015/DWGTrueView2015 have been supported.
Modifications from Ver.1.11 to Ver.1.12
1. AutoCAD2014/AutoCADLT2014/DWGTrueView2014 have been supported.
Modifications from Ver.1.10 to Ver.1.11
1. AutoCAD2013 /AutoCADLT2013 / DWGTrueView2013 have been supported.
Modifications from Ver.1.00 to Ver.1.10
1. AutoCAD2012 /AutoCADLT2012 / DWGTrueView2012 have been supported.
2. By changing the process of image printing, performance was improved.
3. The problem with complicated image operation on AutoCAD, where the resolution might be reduced or image might be printed darker, has been fixed.
4. The processing method of enlarge-printing has been changed, improving the image quality when it is enlarged.
The following hardware and software are recommended for this software.
AutoCAD 2008 - 2016
AutoCAD LT 2009 - 2016
DWG TrueView 2008 - 2016
AutoCAD Architecture 2009 - 2016
AutoCAD Civil 3D 2011 - 2016
AutoCAD Electrical 2009 - 2016
AutoCAD Map 3D 2010 - 2016
AutoCAD Mechanical 2009 - 2016
(The operation of all applications is not confirmed.)
Recommended operating environment:
Any computer running the software listed above
Canon imagePROGRAF series
(Some printers do not support. Please confirm the imagePROGRAF website for the details.)
Canon imagePROGRAF Printer Driver V4.17
Canon imagePROGRAF Printer Driver V4.43 or later
(Not available on 32-bit version of Windows.)
- you must log into Windows as an Administrator Before the installation.
- Before performing the installation, Close all the other application software.
- If a new support AutoCAD product is installed after the installation of the Optimization Module, reinstall the Optimization Module.