Details - MG5200 series Scanner Driver Ver. 17.7.1a (OS X)
ID: 0100434002_EN_4
This file is a TWAIN-compliant scanner driver for Canon color image scanner.

How to Download and Install
Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings. 
2. Double-click the downloaded file and mount it on the Disk Image.
3. Double-click the mounted Disk Image.
4. Double-click the packaged file in the folder. Installation starts automatically.
Driver/Software Details
File Name
File Version
File Size
12.66 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Dutch | Chinese
Post Date
- OS X El Capitan (v10.11) has been added as a supported OS.
- OS X Yosemite (v10.10) has been added as a supported OS. 
- OS X Mavericks v10.9 has been added as a supported OS.
- OS X Mountain Lion (v10.8) has been added as a supported OS.

- OS X v.10.7 has been added as a supported OS.
- The internal modules have been updated.

- The following problem has been rectified:
When the other Canon Inkjet MFP is connected in the same network environment, scanning through a network may not be performed.
- The specifications have been changed so that the operation of the printer’s communication timer is optimized.
- The following problem has been rectified:
When the characters other than ASCII codes are used in a PC name, scanning using the operation panel of the main unit may not be performed.

- The problem that the scanner driver cannot be installed in the Power PCG3 environment has been rectified.
OS X El Capitan v10.11
OS X Yosemite v10.10
OS X Mavericks v10.9
OS X Mountain Lion v10.8.5
OS X Lion v10.7.5
OS X Snow Leopard v10.6.8
OS X Leopard v10.5.8
1.[OS X v10.11]
When the TWAIN driver is launched for the first time, the guide message is displayed. 
When Yes is selected, the TWAIN driver will be launched. And then, the ICA driver cannot be used. 
When No is selected, the ICA driver will be launched. And then, the TWAIN driver cannot be used.
Please launch ImageCapture, and go to [File] -> [Reset TWAIN devices]. When the guide message is displayed again, select Yes or No so as to launch the driver you want to use.

2.[OS X v10.11]
(USB)Due to a change in the OS specifications, scanning from the product (by using the SCAN button) is not available. Perform scanning from a PC.

3.[OS X v10.8, v10.9, v10.10, v10.11]
When you try to install the software downloaded from the Canon download library, the message will be displayed and the installer cannot be launched in some instances. 
Procedures for the installation:
- While pressing and holding the Ctrl key, click on the installer package file.
- Select [Open].
- "The software is from an unidentified developer. Are you sure want to open it?" is displayed. Select [Open].
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.