Details - Firmware Update Tool Version 3.40 for Windows
ID: 0200357202_EN_5
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) Access the Canon website and download the firmware corresponding to your 
(5) Put the downloaded firmware in the Data folder in the location where 
 imagePROGRAF Firmware Update Tool is installed.
(6) From the Start menu, select Programs to execute imagePROGRAF Firmware 
 Update Tool.
Driver/Software Details
File Name
File Version
File Size
5.62 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
Use this program with the systems and the operating environments below.

  Software:   Microsoft Windows 8.1, English edition 
              Microsoft Windows 8, English edition
              Microsoft Windows 7, English edition
              Microsoft Windows Server 2008, English edition
              Microsoft Windows Vista, English edition
              Microsoft Windows Server 2003, English edition
              Microsoft Windows XP, English edition
              Microsoft Windows 2000, English edition

     - Not available on 64-bit version of Windows.
     - For the Windows OS, use the latest version of Service Pack.

  Hardware:   Any computer running the software listed above.

 Printers:   This program is intended for use with the following printers.

              Canon imagePROGRAF series
              (Some printer models are available in the limited countries or 

 Interface Connectivity:
  The printer and computer where this program is executed must be connected 
  with either of the following methods.

  - Connected via a TCP/IP network and capable of printing via the network.
  - Connected via a USB or IEEE 1394 port cable and capable of printing 
    as a local printer.

  Note: If you are using IEEE1394, IEEE1394 Class Driver Ver2.0 or later is 
*  You must log into Windows as an Administrator before the installation.
*  Before you start the firmware version update program, close any other 
 applications that are running.
*  Do not try to use the printer while the firmware version update program is 
 If a print job is executing, cancel the print job or wait for the job to finish 
 before you execute the version update program.
*  Never switch off the target printer while the firmware version update program 
 is running.
*  If the firmware version update fails while writing to the flash ROM, 
 you may not be able to start the printer. In this case, 
 contact a Canon service center or the dealer where you purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.