Details - Firmware Update Tool Ver. 24.00 for Windows
ID: 0200357702_EN_7
You can use this program to update the printer firmware version.

How to Download and Install
(1) Switch the printer on.
(2) When you have downloaded the file, decompress it on your computer hard disk.
(3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
(4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.
Driver/Software Details
File Name
File Version
File Size
5.69 MB
File Languages
English | Spanish | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
Use this program with the systems and the operating environments below.
    Microsoft Windows 10, English edition
    Microsoft Windows 8.1, English edition
    Microsoft Windows 8, English edition
    Microsoft Windows 7, English edition
    Microsoft Windows Vista, English edition
    Microsoft Windows XP, English edition
    Microsoft Windows Server 2008, English edition
    Microsoft Windows Server 2003 R2, English edition
    Microsoft Windows Server 2003, English edition

     - Not available on 64-bit version of Windows.
     - For the Windows OS, use the latest version of Service Pack.

     Any computer running the software listed above.

     Canon imagePROGRAF series

Interface Connectivity:
     The printer and computer where this program is executed must be connected with either of the following methods.

  - Connected via a TCP/IP network and capable of printing via the network.
  - Connected via a USB or IEEE 1394 port cable and capable of printing as a local printer.

  Note: If you are using IEEE1394, IEEE1394 Class Driver Ver2.0 or later is needed.
- You must log into Windows as an Administrator before the installation.
- Before you start the firmware version update program, close any other applications that are running.
- Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before you execute the version update program.
- Never switch off the target printer while the firmware version update program is running.
- If you are unable to connect to the Internet to get the latest information, perform the following procedure.
   1. Access the Canon website from a computer that can connect to the Internet and download the firmware corresponding to your printer.
   2. Copy the downloaded firmware to the computer where this program is installed.
   3. Run this program, select "Specify the Firmware", and specify the downloaded firmware.
- If the firmware version update fails while writing to the flash ROM, you may not be able to start the printer. In this case, contact a Canon service center or the dealer where you purchased the printer.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.