Details - iPF810/iPF820 Firmware Ver.1.12 (Need "Firmware Update Tool" to upgrade)
ID: 0400107602_EN_5
Printer firmware for iPF810/iPF820.

Driver/Software Details
File Name
File Version
File Size
20.17 MB
File Languages
English | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
Modifications from Ver.1.11 to Ver.1.12
1.The rare failure in which paper cut sequence does not complete and falls into freezing is modified.
2.The rare failure that occurs hang-up when sending data during turning on the power or recovering from sleep mode is modified. 

Modifications from Ver.1.10 to Ver.1.11
1. The problem that the community name setting in SNMP setting was not processed correctly has been fixed.

Modifications from Ver.1.09 to Ver.1.10
1.The automatic maintenance operation of printhead has been optimized.

Modifications from Ver.1.06 to Ver.1.09
1. The specification for leading edge feeding for Premium Plain Paper has been changed.
      Install Media Confuguration Tool Ver.3.42(Windos)/3.43(MacOSX), and run it to add the media information.
2. The error of file name in FTP printing has been fixed.
3. The problem in the recovery operation in paper-out condition has been fixed.
4. In HP-GL2, a lower roll paper has been added to the paper feed slot.  

Modifications from Ver.1.04 to Ver.1.06
1.The problem that a printing failure would occur in some CAD applications depending of the setting has been fixed.
2.The problem that "2F26" error would be indicated in rare cases when using the paper width detection "OFF" has been fixed.

Modifications from Ver.1.03 to Ver.1.04
1. In case the nozzles are clogged, formerly you would stop printing and check the printout, and then continue printing by pressing the Online key.  
Now it automatically checks the level of clogging, and if it is possible to print it will continue printing,
and if it needs a printhead replacement, it will display a Replace Printhead message.
2.This modification will greatly improve the workability. 
- [Paper Details]/[Return Defaults] function has been fixed.
- Some functions in the HP-GL/2 have been improved.
Install the Firmware Update Tool if it is not installed.
Install the Firmware Update Tool if it is not installed.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.