Details - iPF8300S Firmware Ver.1.11 (Need "Firmware Update Tool" to upgrade)
ID: 0400109402_EN_8
Printer firmware for iPF8300S.

Driver/Software Details
File Name
File Version
File Size
25.90 MB
File Languages
English | German | French | Italian | Japanese | Korean | Russian | Chinese
Post Date
Modifications from Ver. 1.10 to Ver.1.11
1. The rare failure that IP address is not set correctly was modified.
2. The failure of displaying "Printer Info" when some specific errors occur was modified.
3. The rare failure of hanging up during printing was modified.
4. The failure of display that rarely occurs when Italian is selected was modified.

Modifications from Ver.1.09 to Ver.1.10
1. Minor bug has been fixed.

Modifications from Ver.1.07 to Ver.1.09
1. Optimized error detection sequence of printer.
2. Error codes have been fixed.
3. Fixed the failure that white line appears on the image under certain printing conditions at the binary printing.

Modifications from Ver.1.06 to Ver.1.07
1. Optimized the control of the print head.
2. The problem that the community name setting in SNMP setting was not processed correctly has been fixed.
3. Shutdown timer function has been added.
-Shutdown timer
After the printer goes into Sleep Mode, power will be turned off automatically when the situation that the printer is not operated continues until the time being set in advance by operation panel.
Setup time:OFF/ 5 min./ 10 min./ 30 min./ 1 hour/ 4 hours/ 8 hours*/ 12 hours *Initial value when updating version.

Modifications from Ver.1.04 to Ver.1.06
1. The control of waste ink has been optimized.
2. The infrequent failure that a job sent during transition to sleep mode might be cancelled has been fixed.
3. The fairly infrequent failure of printer not retrieving from sleep mode has been fixed.

Modifications from Ver.1.01 to Ver.1.04
1.Modifications due to parts change
Install the Firmware Update Tool if it is not installed.
Install the Firmware Update Tool if it is not installed.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.