Details - EOS C100 Firmware Version [Windows]
ID: 0400144502_EN_1

Driver/Software Details
File Name
File Version
File Size
12.47 MB
File Languages
English | Spanish | French | Japanese | Chinese
Post Date
Download and Installation Instructions
Firmware Version incorporates the following improvements and fixes.
1. Compatibility with the Canon RC-V100 Remote Controller (expected to be available in June 2014) has been added.
2. Peripheral illumination correction data has been added for the [CN-E35mm T1.5 L F] EF Cinema lens and the [EF-S 55-250mm f4-5.6 IS STM] EF lens.
3. Fixes a phenomenon in which the EF Cinema lens' F number was incorrectly displayed.

Firmware Version is only for EOS C100 cameras without the Dual Pixel CMOS AF Feature Upgrade. If the EOS C100 camera has had the DAF Feature Upgrade applied, please download Firmware Version

Firmware Version is for updating Cinema EOS C100 cameras with firmware of a version from to If your camera's firmware is already version, it is not necessary to update the firmware. 
Once the camera is updated to the latest firmware version, it cannot be restored to a previous version. For details, please refer to the instruction manual (the updated version).

Preparations for a firmware update:
After the Firmware update has been performed, the camera's menu settings and Custom Picture settings will be reset. It is recommended that users save their menu and Custom Picture settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the camera's user manual titled Saving and Loading Camera Settings.

The downloaded firmware folder contains the firmware (File Name: VIF4.FIM, File Size: 35,066,904 bytes) and a procedure manual for updating the firmware (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Please check the firmware update procedure manual carefully before starting update operations.

The following items are required to perform this firmware update:
1. A Cinema EOS C100 camera body
2. A computer (OS: Windows)
OS Requirements: Windows 8.1, Windows 8, Windows 7 SP1
3. A 64 MB or higher-capacity SD memory card or an SDHC/SDXC memory card (both commercially available)
4. An SD card reader-writer (commercially available) or an SD card slot on the computer
5. A fully-charged, dedicated battery pack for the camera
6. The dedicated compact power adapter bundled with the camera
7. The firmware (the file downloaded from the Canon Web site)

Q1:What are the changes in Firmware Version
1. The optional Canon Remote Controller RC-V100* can be used with the EOS C100. This enables setting and adjustment** of items such as exposure and white balance of footage while away from the camera.
* Separately-sold, scheduled for release in June
**It is necessary to select the [RC-V100] from the camera's [REMOTE Term.] menu.
2. Peripheral illumination correction for 1 EF Cinema Lens [CN-E35mm T1.5 L F] and 1 EF lens [EF-S 55-250mm f4-5.6 IS STM] has been made possible. It is now possible to maintain even illumination across an image plane, and reduce vignetting.
3. A phenomenon has been fixed in which the EF Cinema lens' F number was incorrectly displayed.

Q2: How can I carry out a firmware update?
Please download the most recent firmware for this model from the Canon Web site and follow the procedure shown on the Web site to install it.

Change History:

Changes in Version
1. A Continuous Recording function* has been added allowing for nonstop recording. At the same time the camera creates IN and OUT points in the footage every time the START/STOP button is pressed. 
*At this time, this function is compatible with "EDIUS Pro 7" software which is distributed by Grass Valley.
If the clips recorded using the Continuous Recording function will be saved using the bundled [Data Import Utility (For Windows)] software, please be sure to update the software to the [Data Import Utility Ver.2.1(for Windows)] which can be downloaded from the Pixela website. (English language site) (Japanese language site)

Changes in Version
1. ISO up to 80,000 has been added. This raises the current maximum ISO sensitivity from ISO 20,000 to ISO 80,000. With this change, color footage can be taken of a subject in an environment that is so dark that it would have been highly difficult to identify the position of the subject.
2. Peripheral illumination correction for EF Cinema Lenses has been made possible. Peripheral Illumination Correction Data corrects insufficiencies in peripheral illumination caused by the lens' optical characteristics when one of the seven (7) Canon Cinema Lenses (EF-mount) are attached.
3. It has become newly possible to correct insufficiencies in peripheral illumination caused by the lens' optical characteristics when one of the additional 11 EF Lenses is attached.
4. Use of the function included in Version which enables continuous focusing and correct aperture on a subject that is in the middle of the screen with the [EF-S 18-135mm F3.5-5.6 IS STM] lens has been extended to include the [EF-S 18-55mm F3.5-5.6 IS STM] lens..
5. Support has been added for a Key Lock setting, which disables all key inputs, including the Recording Start/Stop Button.
6. It is now possible to input the same commands that are normally input using the joystick when the grip is removed and the joystick not attached through the assignment of Up, Down, Left, Right and SET functions to the Assign Button. 
7. Movement of the position of a magnified image displayed on the LCD monitor has been made possible. 

Changes in Version
1. Focus can now be continuously held on the subject when the exchangeable lens [EF-S 18-135mm f/3.5-5.6 IS STM] is attached and the focus mode switch is set to AF. In addition, the iris can now stay continuously set.
2. The polarity balance of the XLR terminal has been modified to improve compatibility with external audio devices. The pin configuration has been modified to be consistent with the Instruction Manual.  Before the Firmware update the pin configuration for the XLR jack was (pin1: shield, pin2: cold, pin3: hot).  After the Firmware update the pin configuration for the XLR jack will be (pin1: shield, pin2: hot, pin3: cold).  The XLR pin configuration meets the international AES standard recommendation. The firmware update will avoid the scenario where the unit if used in combination with a device of differing polarity of the XLR terminals, would result in weakened sound levels due to a reversal of the phase relationship.
Downloads are not available as your browser JavaScript setting is disabled. Please enable your browser JavaScript setting to download the file.