Refurbished EOS R Body
Offer valid December 3, 2024, 12:00 a.m. through January 5, 2025, 11:59 p.m. ET. Offer valid in U.S.A. only, and void where prohibited, taxed or restricted. Availability of certain items may be limited. Limit of five of any one item per order, subject to availability. Order will be shipped to a street address in the 50 United States or the District of Columbia only. Dealers, distributors and other resellers are not eligible for this offer. Offer subject to Terms of Sale.
Offer valid November 4, 2024, 12:00 a.m. through December 31, 2024, 11:59 p.m. ET. Offer valid in U.S.A. only, and void where prohibited, taxed or restricted. Availability of certain items may be limited. Limit of ten of any one item per order, subject to availability. Order will be shipped to a street address in the 50 United States or the District of Columbia only. Dealers, distributors and other resellers are not eligible for this offer. Offer subject to Terms of Sale.
- RF Mount Compatible with RF Lenses and EF/EF-S Lenses*.
- 30.3 Megapixel Full-frame CMOS Sensor and DIGIC 8 Image Processor.
- Dual Pixel CMOS AF with 5,655 Manually Selectable AF Points**.
- 4K 30p with Canon Log and 10-bit 4:2:2 HDMI Output.
- Built-in EVF with 3.69 Million Dots, Vari-angle Touchscreen LCD and Dot-matrix LCD Panel.
- Sophistication in a Lightweight, Compact Size.
Terms
The following are the terms and conditions ("Terms") for the Canon U.S.A., Inc. Auto Replenishment System (the "Service"). These Terms are between you and Canon U.S.A., Inc. ("Canon USA," "we" or "us") and govern your and our respective rights and obligations relating to the Service. Please note that your use of the Service is also governed by Canon Direct’s Terms of Use and our Privacy Statement, each of which (as changed over time) are incorporated into these Terms, and all of which govern our respective rights and obligations concerning the Service. By placing an order through, or otherwise using, the Service, you accept, and agree to be bound by, these terms, conditions, limitations and requirements. Please read these Terms carefully.
Service
We reserve the right to change the Service benefits, including discount amounts and eligibility used to determine discount amounts, at any time in our sole discretion. All such changes will apply to future orders.
When you are enrolled, the Service will automatically create a new order for Eligible Products according to the shipment schedule applicable to the frequency of the Service you have selected, until you cancel.
We may, in our sole discretion, terminate your enrollment at any time without notice. If we do so, you will only be charged for orders that have been shipped to you.
Eligible Products
The eligible products that may be ordered through the Service (the identity of which are subject to change) are set forth on the product detail page on the Canon Direct website (shop.usa.canon.com) with the option to select the Service displayed (each, an "Eligible Product"). Your participation in the Service is personal to you, and you may not assign or transfer your enrollment, or any of the benefits of the Service, to any third party without our authorization. The Service is only available to customers with shipping addresses in the 50 United States and the District of Columbia.
Offers, Orders and Returns
Discounts and any limited time promotions associated with the Service apply only to Eligible Products displaying the offer message on the product detail page on the Canon Direct website (shop.usa.canon.com). Discounts and any amounts from limited time promotions that apply to your order, if any, and which are still in effect, will be automatically deducted from your order.
Some offer details may change as you receive deliveries over time (for example, price, taxes, availability, and shipping charges). If an Eligible Product is unavailable when we plan to ship it, we will notify you that we are unable to process your order, and we will wait to process your order until the next scheduled shipping date when the Eligible Product is available. When the Eligible Product becomes available, the price will be the price when you ordered it, regardless of when it becomes available.
Returns of Eligible Products under the Service are subject to our return policy. Service enrollments are void where prohibited.
Enrollment
As part of your enrollment in the Service, you will be required to register with us so that your printer can be identified as participating in the Service. Instructions for registering your printer are contained in the introductory email sent to you after you apply for enrollment in the Service, as well as in the "My Account" section of the Canon Direct website (shop.usa.canon.com). You will be required to accept terms and conditions provided by our parent company, Canon Inc., as part of registering your printer. Canon Inc. will notify us when an ink or toner cartridge reaches a certain low ink/toner threshold, and we will fill an order for the ink or toner and ship it to you under these Terms. Information provided to us and Canon Inc. may be stored on servers outside of the United States and will be subject to our Privacy Statement. It's possible that your order for Eligible Products will not arrive prior to running out of ink or toner where your use was more than usual, particularly if such greater use occurred over 1 or 2 days.
Payment and Cancellation
The total cost charged to your payment method for each order under the Service will be the cost of the Eligible Product on the day that order is processed, less any discount offered as a percentage or dollars off at the time you registered, plus any applicable sales tax. We reserve the right to modify or cancel any discount offered at the time you registered for the Service, with notice to you, and future orders fulfilled under the Service will reflect any such change.
For each Eligible Product shipped under the Service, you authorize us to charge the payment method used when you enrolled unless otherwise directed by you. If we are unable to complete your order with the payment method you used when you enrolled, we will not fulfill the order and will notify you that your payment method needs to be updated.
Your enrollment in the Service will remain in effect until it is canceled. You can cancel or modify your enrollment at any time via the "My Account" section of the Canon Direct website (shop.usa.canon.com). If you cancel or modify your enrollment after an order has been processed, you will be charged for the order as processed. If the discount for such Eligible Product changes, the new discount will be applied to your future shipments of that Eligible Product. If, after enrollment, you are no longer in possession of your printer for any reason (e.g., due to warranty return, replacement, or exchange), the total cost for the Service will continue to be charged to your payment method until you cancel your enrollment. No refunds will be granted because of your failure to cancel your enrollment in such situation.
Your rights under these Terms will automatically terminate without notice if you fail to comply with any of its terms and conditions. In the event of such termination, we may immediately revoke your access to the Service. Our failure to insist upon or enforce your strict compliance with these Terms and will not constitute a waiver of any of our rights.
Changes to Terms
We may, in our sole discretion, change these Terms without notice to you. If any change to these Terms is found invalid, void, or for any reason unenforceable, that change is severable and does not affect the validity and enforceability of any remaining changes or conditions. YOUR CONTINUED PARTICIPATION AFTER WE CHANGE THESE TERMS CONSTITUTES YOUR ACCEPTANCE OF THE CHANGES. IF YOU DO NOT AGREE TO ANY CHANGES, YOU MUST CANCEL YOUR ENROLLMENT.
Disclaimer of Warranties and Limitation of Liability
WE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SERVICE INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. WITHOUT LIMITING THE PRECEDING SENTENCE, UNLESS OTHERWISE REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL OUR, OR OUR LICENSORS’, AGGREGATE LIABILITY UNDER THESE TERMS WITH RESPECT TO ANY CLAIM EXCEED ONE HUNDRED DOLLARS ($100.00).
Use as a High-Quality Webcam
You can use this camera with EOS Webcam Utility Software.
Learn More and Start Streaming
In the box
- EOS R Camera Body Refurbished
- Battery Pack LP-E6N
- Battery Charger LC-E6
- Wide Strap
- Cable Protector
- Interface Cable IFC-100U
- Camera Cover R-F-5 (not shown)
Return Policy
The Canon Online Store will accept, for return or exchange, defective or unopened merchandise purchased at the Canon Online Store, subject to the exceptions and timeframe for returns listed below: All merchandise returned to the Canon Online Store must be in the original packaging with all original items (such as manuals, cables, etc.) accompanying the merchandise and a copy of the invoice/packing slip included to be eligible for return or exchange. Shipping and handling fees from your original order will not be refunded, unless the merchandise is determined by the Canon Online Store, in its sole discretion, to be defective.
See Return Policy for complete information.
Overview
Meet Canon's new addition to the EOS System, the EOS R camera. The foundation of this system is an entirely new lens mount, designed for optical excellence today and incredible optical potential for the future. Get ready to capture a variety of subjects in many different environments. Versatility is key with the EOS R; a 30.3 Megapixel Full-frame CMOS sensor and the DIGIC 8 Image Processor deliver stellar low-light performance, even in dark situations. Focus can be attained with incredible speed and accuracy thanks to Canon's proprietary Dual Pixel CMOS AF system and a maximum of 5,655 manually selectable AF points*. This system also captures smooth 4K video that's easy to share and can be enhanced in post-production thanks to the included Canon Log. The built-in, high-precision EVF and a Vari-angle Touchscreen LCD make it easy to adapt to different shooting situations. In daylight or in the dark, in the studio or on the street, the EOS R's lightweight, intuitive and durable design means strong performance and gorgeous results. Whether capturing landscapes or wildlife, wedding portraits or dance performances, the EOS R is an advanced and impressive imaging tool that's primed to deliver the stunning photos and videos that photographers, moviemakers and any visual storytellers need to make their stories fly. Witness a new beginning with the EOS R and be the revolution.
Technical Specifications
View Full Technical Specs PDF
Type
Digital single-lens non-reflex AF/AE camera
SD/SDHC/SDXC memory cards
- SD card speed class-compatible.
- UHS-I and II supported.
- Use of UHS-II microSDHC/SDXC cards with a microSD to SD adapter is not recommended. When using UHS-II supported cards, use SDHC/SDXC cards compatible with UHS-II.
- Eye-Fi cards not supported.Multimedia cards (MMC) cannot be used.
Approx. 36.0 x 24.0mm
Canon RF lens group (excluding EF, EF-S and EF-M lenses)
When using Mount Adapter EF-EOS R: Canon EF or EF-S lenses (excluding EF-M lenses)
Canon RF mount
Image Sensor
CMOS sensor (compatible with Dual Pixel CMOS AF)
Approx. 30.3 Megapixels
Approx. 5.36 µm square
Approx. 31.7 megapixels
3:2 (Horizontal:Vertical)
RGB primary color filters
Installed in front of the image sensor, non-detachable
- Self Cleaning Sensor Unit
- Removes dust adhering to the low-pass filter.
- At power off only / Enable / Disable. Performed automatically (taking about 3.0 sec. as indicated on the screen) or manually (taking about 9.0 sec. as indicated on the screen).
- After manually activated cleaning, the camera will automatically restart (Power OFF to ON).
- When [Multi Shot Noise Reduction], [Multiple exposures], or [HDR mode] is set, [Clean now] and [Clean manually] cannot be selected.
- Dust Delete Data acquisition and appending
- The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images.
- The dust coordinate data appended to the image is used by the provided software to automatically erase the dust spots.
- Not available with EF-S lenses, in cropped shooting or when distortion correction is applied.
- Manual cleaning (by hand)
Recording System
EXIF 2.3 (DCF2.0)
3:2 Aspect Ratio
Large/RAW/C-RAW: 6720 x 4480
Medium: 4464 x 2976
Small 1: 3360 x 2240
Small 2: 2400 x 1600
1.6x (Crop)
Large/RAW/C-RAW: 4176 x 2784
Small 2: 2400 x 1600
4:3 Aspect Ratio
Large/RAW/C-RAW: 5952 x 4480*
Medium: 3968 x 2976
Small 1: 2976 x 2240*
Small 2: 2112 x 1600*
16:9 Aspect Ratio*
Large/RAW/C-RAW: 6720 x 3776
Medium: 4464 x 2512
Small 1: 3360 x 1888
Small 2: 2400 x 1344
1:1 Aspect Ratio
Large/RAW/C-RAW: 4480 x 4480
Medium: 2976 x 2976
Small 1: 2240 x 2240
Small 2: 1600 x 1600
- Values for Recording Pixels are rounded to the nearest 100,000 or 10,000.
- For RAW and JPEG images, information outside the cropping area is not retained.
- JPEG images are generated in the set aspect ratio.
- RAW images are generated in [3:2], and the set aspect ratio is appended.
The following file numbers can be set:
- File numbering methods
- Continuous numbering
- The numbering of captured images continues even after you replace the card.
- Auto reset
- When you replace the card, the numbering will be reset to start from 0001. If the new SD card already contains images, the numbering will continue from the last recorded image in the card.
- Continuous numbering
- Manual reset
- Resets the file number to 0001, and creates a new folder automatically.
Possible
Selectable between sRGB and Adobe RGB
- Auto
- Standard
- Portrait
- Landscape
- Fine Detail
- Neutral
- Faithful
- Monochrome
- User Defined 1-3
- In Scene Intelligent Auto, [Auto] will be set automatically.
- [Standard] is the default setting for [User Def. 1-3].
White Balance
- Auto
- Day Light
- Shade
- Cloudy*
- Tungsten light
- White fluorescent light
- Flash
- Custom (Custom WB)
- Color temperature
Option between ambience priority and white priority settings.
Blue/amber bias: ±9 levels
Magenta/green bias: ±9 levels
Corrected in reference to the current WB modes color temperature.
Viewfinder
OLED color electronic viewfinder
Approx. 100% vertically and horizontally relative to the shooting image area (with image quality L, at approx. 23mm eyepoint).
Coverage
At approx. 23mm eyepoint
Approx. 0.76 (with 50mm lens at infinity, -1 m-1)
Approx. 23mm (at -1 m-1 from the eyepiece lens end)
- AF point information
- Number of remaining multiple exposures
- HDR shooting
- Multiple-exposure shooting
- Dual Pixel RAW shooting
- Multi Shot Noise Reduction
- Digital Lens Optimizer
- AF method
- AF operation
- Drive mode
- Metering mode
- Anti-flicker shooting
- Shooting mode
- Scene icons
- AE lock
- Flash-ready
- Flash off
- FE lock
- High-speed sync
- Shutter speed
- Multi-function lock warning
- Aperture
- Lens information
- Exposure level indicator
- Exposure compensation
- Highlight tone priority
- ISO speed
- Possible shots
- Number of self-timer shooting
- Maximum burst
- Battery level
- Exposure simulation
- AEB
- FEB
- Still photo cropping
- Aspect ratio
- Auto Lighting Optimizer
- Picture Style
- White balance
- White balance correction
- Image Quality
- Bluetooth® function
- Wi-Fi® function
- Histogram
- Electronic level
Autofocus
Phase-difference detection system with image sensor (Dual Pixel CMOS AF)
Max. 5,655
When selected with cross keys.
EV -6 to 18 (f/1.2, at 73°F/23°C, ISO 100, One-Shot AF)
- One-Shot AF
- Servo AF
- Manual (Manual focus)
AF Point Selection and AF Operation
- Enable
- Disable
- LED AF assist beam only
- Focus range with the AF-assist beam is generally no more than 13.1 ft. / 4m (at f/5.6).
Exposure Control
- Evaluative metering (AF point-linked)
- Partial metering (approx. 6.1% of the area at the center of the screen)
- Spot metering (approx. 2.7% of the area at the center of the screen)
- AF point-linked spot metering not provided.
- Center-weighted average metering
EV -3 - 20 (at 73°F/23°C, ISO 100)
- Scene Intelligent Auto
- Flexible-priority AE
- Program AE (shiftable)
- Shutter-priority AE (Safety shift possible)
- Aperture-priority AE (Safety shift possible)
- Manual exposure
- Bulb
- Custom shooting mode C1, C2, C3
Manual Setting
Normal | ISO 10040000 (in 1/3-stop or whole-stop increments) |
Expanded | L: equivalent to ISO 50, H1: 51200, H2: 102400 |
- For [Highlight tone priority], the minimum ISO speed limit will be ISO 200 to 40000.
- ISO speed safety shift possible with Custom Function.
- All the expanded ISO speeds including those for movies are only “equivalent speeds.”
Auto
Shooting Mode | ISO Settings | |
No Flash | With Flash | |
Scene Intelligent Auto | ISO 10012800 | ISO 1001600 |
Fv/P/Tv/Av/M | ISO 10040000*1 | ISO 1001600*1 |
B | ISO 400 fixed | ISO 400 fixed |
*1 Depending on [Minimum] and [Maximum] of [ISO speed settings] or [Range for stills].
Exposure Compensation
- Auto AE lock
- The metering mode for AE lock after focus can be customized.
- Manual AE lock
- In the Fv, P, Tv, Av and M modes, enabled with the AE lock button. (Press again to update.)
- Enabled in all metering modes.
Shutter
Electronically controlled focal-plane shutter
- Electronic first curtain, mechanical second curtain
- Electronic shutter (slit rolling read out)
- Mechanical first and second curtain
1/8000 to 30 sec., bulb (total range of all shooting modes)
Soft-touch electromagnetic release
10-sec. delay, 2-sec. delay
Shutter Lag Time
External Speedlite
E-TTL II autoflash
±3 stops in 1/3- or 1/2-stop increments
Provided
The camera can set the following with EX series Speedlites:
- External flash control
- Flash firing, E-TTL II Flash metering, Slow synchro, Safety FE, Flash mode, Wireless function, Flash zoom, Shutter synchronization and Flash exposure compensation
- Flash Custom Function setting
- The setting options for both (1) and (2) will differ depending on the Speedlite used.
Drive System
- Single shooting
- High-speed continuous shooting
- Max. approx. 8.0 fps
- The conditions are attaining the maximum continuous shooting speed are as follows:
- Shooting with a fully charged battery in One-Shot AF mode at a 1/1000 sec. or faster shutter speed and maximum aperture (depending on the lens), at room temperature (73°F/23°C), with flicker reduction, Dual Pixel RAW shooting and Digital Lens Optimizer disabled.
- In One-Shot AF mode with Image Stabilizer off when using these lenses: EF 300mm f/4L IS USM, EF 28-135mm f/3.5-5.6 IS USM, EF 75-300mm f/4-5.6 IS USM, EF 100-400mm f/4.5-5.6L IS USM.
- The continuous shooting speed for high-speed continuous shooting may be lower, depending on conditions such as these: battery level, temperature, flicker reduction, Dual Pixel RAW shooting, shutter speed, aperture, subject conditions, brightness, AF operation, type of lens, use of flash and shooting settings.
- The maximum continuous shooting speed may be lower when using a cold battery in cold environments or when the battery level is low, at approx. 6.0 shots/sec.
- Max. approx. 8.0 fps
- With Servo AF: Max. approx. 5.0 fps (shooting speed priority) [Silent LV shooting: Mode 1]
- With Servo AF, the maximum continuous shooting speed may become slower depending on subject conditions or the lens used. Also, the maximum continuous shooting speed will become slower when setting the [LV silent shooting] to [Disable].
- Low-speed continuous shooting (Tracking priority)
- Max. approx. 3.0 fps
- With Dual Pixel RAW: Max. approx. 2.2 fps
- High-speed continuous shooting not possible.
- Self-timer: 10 sec./remote control
- Self-timer: 2 sec./remote control
Live View Functions
Still photo shooting and video shooting
- Dual Pixel CMOS AF
- Manual focus
- Magnified view possible by approx. 5x or 10x for manual focusing (not possible during movie shooting).
- Center-weighted average metering
- Metering brightness range: EV -1 - 20 (at 73°F/23°C, ISO 100)
- AF point-linked evaluative metering
- For face detection with Face detection + Tracking AF.
EV -4 - 18 (at 73°F/23°C, ISO 100, One-Shot AF, with 29.97 fps)
- Off
- 3x3
- 6x4
- 3x3+diag
Video Shooting
MP4
Video: MPEG-4 AVC / H.264
- Variable (averaged) bit rate
ALL-I: Linear PCM*
IPB: AAC
*4K All-I recording requires an SD Memory card with a minimum write speed of 60MB/s.
Movie-recording Quality | SD Card | ||
4K (UHD) 3840 x 2160 |
29.97 fps 25.00 fps 24.00 fps, 23.93 fps |
ALL-I | UHS-II, Video Speed Class 60* or higher |
IPB | UHS-I, UHS Speed Class 3 or higher | ||
Full HD 1920 x 1080 |
59.94 fps, 50.00 fps | ALL-I | UHS-I, UHS Speed Class 3 or higher |
IPB | SD Speed Class 10 or higher | ||
29.97 fps, 25.00 fps 24.00 fps, 23.98 fps HDR movies |
ALL-I | UHS-I, UHS Speed Class 3 or higher | |
IPB | SD Speed Class 4 or higher | ||
29.97 fps, 25.00 fps | IPB Light |
SD Speed Class 4 or higher | |
HD 1280 x 720 |
119.9 fps, 100.0 fps | ALL-I | UHS-I, UHS Speed Class 3 or higher |
59.94 fps, 50.00 fps | ALL-I | Speed Class 10 or higher | |
IPB | SD Speed Class 4 or higher | ||
29.97 fps, 25.00 fps HDR movies |
IPB | Speed Class 4 or higher |
* With Movie crop set to [Disable]. Movie digital IS set to [Disable].
- Dual Pixel CMOS AF
- Manual focus
- Magnified view possible by approx. 5x or 10x for manual focusing (not possible during movie shooting).
Full range (0 to 255)
Exposure control
Shutter Speed
ISO Speed (Recommended Exposure Index)
±3 stops in 1/3- or 1/2-stop increments
LCD Monitor
TFT color, liquid-crystal monitor
3.15-inch (screen aspect ratio of 3:2)
3.15 in./8.01cm diagonal (2.63 in./6.67cm width, 1.75 in./4.44cm height)
Approx. 2.10 million dots
Approx. 100% vertically/horizontally
Manually adjustable to one of seven brightness levels
Clear View LCD II
- Anti-smudge coating provided.
- Anti-reflection coating not provided.
29 (English, German, French, Dutch, Danish, Portuguese, Finnish, Italian, Ukraine, Norwegian, Swedish, Spanish, Greek, Russian, Polish, Czech, Hungarian, Vietnamese, Hindi, Romanian, Turkish, Arabic, Thai, Simplified/Traditional Chinese, Korean, Malay, Indonesian, Japanese)
Playback
- Single image display
- No information display
- Basic information display
- Detailed shooting information display
- Detailed information
- Lens/Histogram information
- White balance information
- Picture Style information 1
- Picture Style information 2
- Color space/Noise reduction information
- Lens aberration correction information 1
- Lens aberration correction information 2
- Record of sent images
- GPS information
- IPTC information
- Index display
- 4-image index
- 9-image index
- 36-image index
- 100-image index
Display selection is available for Basic information display and Shooting information display.
The white areas with no image data will blink.
Image Protection and Erase
- Single image (select image)
- Select range
- All images in folder
- All images on card
- Image browsing and image search can be based on ratings.
- Ratings-based image selections also possible with DPP.
- All found images (only during image search)
Except protected images
- Select images to erase
- Select range
- All images in folder
- All images on card
- All found images (only during image search)
Direct Printing
Images can be sent via Wi-Fi® to a PictBridge-compatible (Wireless LAN) printer and printed.
DPOF: Digital Print Order Format
Compliant to DPOF Version 1.1
Customization
Customizable Buttons
Still Photo Shooting | Movie Shooting |
Shutter button | Multi-function button |
Movie button | LCD panel illumination button |
Multi-function button | MODE button |
LCD panel illumination button | AF-ON button |
MODE button | AE lock button |
AF-ON button | AF point selection button |
AE lock button | Lens AF stop button |
AF point selection button | Up key (cross keys) |
Lens AF stop button | Left key |
Up key (cross keys) | Right key |
Left key | Down key |
Right key | SET button |
Down key | |
SET button |
Customizable Dials
Main dial |
Wuick control dial |
Control ring |
Customizable Buttons
Functions that Can be Assigned (Shooting) | Functions that Can be Assigned (Playback) |
ISO speed | Function shortcut |
White balance | Jump display |
Check focus/Display info. | |
Movie shooting | |
Flexible-priority AE | |
AF | |
User customization |
Interface
Equivalent to SuperSpeed USB (USB 3.1 Gen 1)
- For PC communication
- For WFT-E7 (Ver. 2) connection
- Shared with terminal for in-camera charging with the USB Power Adapter PD-E1.
- In-camera charging: although it is compatible with USB Type-C (5V/1.5A) equivalent, do not charge the camera other than with the USB Power Adapter PD-E1.
Type C (Resolution switches automatically) / CEC not compatible
- Images can be displayed through the HDMI output and on screen at the same time.
- Images will not be displayed unless [NTSC] or [PAL] is properly set according to the video system of the TV set.
3.5mm diameter stereo mini jack
Power Source
Battery Pack LP-E6N (or LP-E6) x 1
- With the AC Adapter + DC Coupler, AC power is possible.
- When the Battery Grip BG-E22 is used, two battery packs (LP-E6N or LP-E6) can be installed.
- With the USB Power Adapter PD-E1, in-camera charging of LP-E6N is possible but LP-E6 cannot be charged. The USB Power Adapter PD-E1 is not compatible with powering the camera.
Automatic battery check when the power switch is turned ON.
Displayed in 6 levels. Battery level displayed on the LCD panel and in the viewfinder.
One of six levels displayed for LP-E6N and LP-E6.
The display for other power sources is different.
Power turns off after the set time of non-operation elapses.Display off
Available time options: 15 sec. / 30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min.
Auto power off
Available time options: 30 sec. / 1 min. / 3 min. / 5 min. / 10 min.
Disable
Viewfinder off
Available time options: 1 min. / 3 min. / Disable
At least approx. 6 min. until auto power off while the [Date/Time/Zone] screen is displayed.
Built-in secondary battery
When fully-charged, the date/time can be maintained for approx. 3 months.
Recharge time: approx. 8 hrs.
The recharge time required to provide the above number of months with no battery pack installed.
Approx. 0.9 sec.
- Based on CIPA standards.
Dimensions and Weight
Approx. 5.35 x 3.87 x 3.32 in. / 135.8 x 98.3 x 84.4mm
Approx. 5.35 x 3.87 x 2.67 in. / 135.8 x 98.3 x 67.7mm (from grip to monitor)
Approx. 1.46 lbs. / 660g (including battery, SD memory card; without body cap)
Approx. 1.28 lbs. / 580g (body only; without battery, card or body cap)
Operating Environment
32-104° F / 0-40° C
Working Conditions
85° or less
SDK / API Compatibility
Refurbished EOS R Body Compatible Products
Product Disclaimer
* As of February 13, 2019.
** Optional Canon Mount Adapter EF-EOS R is required when using EF/EF-S lenses with an EOS RP camera.
*** Available AF point locations may decrease when shooting with AF cropping or in movie mode, or depending on camera settings or lens attached.
**** Based on AF speed tests, performed by Canon, Inc., using RF 24-105mm f/4L IS lens.
^ When using RF 50mm F1.2 L USM, with central AF point.