VB-M641VE
- IP66 Rated & IK10 Vandal Resistant Enclosure
- Canon's Unique Remote Adjustment Function for Easy Post-Installation Changes to the Camera's Pan/Tilt/Rotation Angles and Zoom
- Canon 2.4x Optical Zoom Lens with 111.5° Angle of View
- 1.3 Megapixel High-Sensitivity CMOS Sensor with Exceptional Low-Light Performance
- Advanced DIGIC DV III Image Processor to help Maximize Image Quality
- Haze Compensation, Smart Shade Control and Auto Gain Control Limit
Terms
The following are the terms and conditions ("Terms") for the Canon U.S.A., Inc. Auto Replenishment System (the "Service"). These Terms are between you and Canon U.S.A., Inc. ("Canon USA," "we" or "us") and govern your and our respective rights and obligations relating to the Service. Please note that your use of the Service is also governed by Canon Direct’s Terms of Use and our Privacy Statement, each of which (as changed over time) are incorporated into these Terms, and all of which govern our respective rights and obligations concerning the Service. By placing an order through, or otherwise using, the Service, you accept, and agree to be bound by, these terms, conditions, limitations and requirements. Please read these Terms carefully.
Service
We reserve the right to change the Service benefits, including discount amounts and eligibility used to determine discount amounts, at any time in our sole discretion. All such changes will apply to future orders.
When you are enrolled, the Service will automatically create a new order for Eligible Products according to the shipment schedule applicable to the frequency of the Service you have selected, until you cancel.
We may, in our sole discretion, terminate your enrollment at any time without notice. If we do so, you will only be charged for orders that have been shipped to you.
Eligible Products
The eligible products that may be ordered through the Service (the identity of which are subject to change) are set forth on the product detail page on the Canon Direct website (shop.usa.canon.com) with the option to select the Service displayed (each, an "Eligible Product"). Your participation in the Service is personal to you, and you may not assign or transfer your enrollment, or any of the benefits of the Service, to any third party without our authorization. The Service is only available to customers with shipping addresses in the 50 United States and the District of Columbia.
Offers, Orders and Returns
Discounts and any limited time promotions associated with the Service apply only to Eligible Products displaying the offer message on the product detail page on the Canon Direct website (shop.usa.canon.com). Discounts and any amounts from limited time promotions that apply to your order, if any, and which are still in effect, will be automatically deducted from your order.
Some offer details may change as you receive deliveries over time (for example, price, taxes, availability, and shipping charges). If an Eligible Product is unavailable when we plan to ship it, we will notify you that we are unable to process your order, and we will wait to process your order until the next scheduled shipping date when the Eligible Product is available. When the Eligible Product becomes available, the price will be the price when you ordered it, regardless of when it becomes available.
Returns of Eligible Products under the Service are subject to our return policy. Service enrollments are void where prohibited.
Enrollment
As part of your enrollment in the Service, you will be required to register with us so that your printer can be identified as participating in the Service. Instructions for registering your printer are contained in the introductory email sent to you after you apply for enrollment in the Service, as well as in the "My Account" section of the Canon Direct website (shop.usa.canon.com). You will be required to accept terms and conditions provided by our parent company, Canon Inc., as part of registering your printer. Canon Inc. will notify us when an ink or toner cartridge reaches a certain low ink/toner threshold, and we will fill an order for the ink or toner and ship it to you under these Terms. Information provided to us and Canon Inc. may be stored on servers outside of the United States and will be subject to our Privacy Statement. It's possible that your order for Eligible Products will not arrive prior to running out of ink or toner where your use was more than usual, particularly if such greater use occurred over 1 or 2 days.
Payment and Cancellation
The total cost charged to your payment method for each order under the Service will be the cost of the Eligible Product on the day that order is processed, less any discount offered as a percentage or dollars off at the time you registered, plus any applicable sales tax. We reserve the right to modify or cancel any discount offered at the time you registered for the Service, with notice to you, and future orders fulfilled under the Service will reflect any such change.
For each Eligible Product shipped under the Service, you authorize us to charge the payment method used when you enrolled unless otherwise directed by you. If we are unable to complete your order with the payment method you used when you enrolled, we will not fulfill the order and will notify you that your payment method needs to be updated.
Your enrollment in the Service will remain in effect until it is canceled. You can cancel or modify your enrollment at any time via the "My Account" section of the Canon Direct website (shop.usa.canon.com). If you cancel or modify your enrollment after an order has been processed, you will be charged for the order as processed. If the discount for such Eligible Product changes, the new discount will be applied to your future shipments of that Eligible Product. If, after enrollment, you are no longer in possession of your printer for any reason (e.g., due to warranty return, replacement, or exchange), the total cost for the Service will continue to be charged to your payment method until you cancel your enrollment. No refunds will be granted because of your failure to cancel your enrollment in such situation.
Your rights under these Terms will automatically terminate without notice if you fail to comply with any of its terms and conditions. In the event of such termination, we may immediately revoke your access to the Service. Our failure to insist upon or enforce your strict compliance with these Terms and will not constitute a waiver of any of our rights.
Changes to Terms
We may, in our sole discretion, change these Terms without notice to you. If any change to these Terms is found invalid, void, or for any reason unenforceable, that change is severable and does not affect the validity and enforceability of any remaining changes or conditions. YOUR CONTINUED PARTICIPATION AFTER WE CHANGE THESE TERMS CONSTITUTES YOUR ACCEPTANCE OF THE CHANGES. IF YOU DO NOT AGREE TO ANY CHANGES, YOU MUST CANCEL YOUR ENROLLMENT.
Disclaimer of Warranties and Limitation of Liability
WE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SERVICE INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. WITHOUT LIMITING THE PRECEDING SENTENCE, UNLESS OTHERWISE REQUIRED BY APPLICABLE LAW, IN NO EVENT WILL OUR, OR OUR LICENSORS’, AGGREGATE LIABILITY UNDER THESE TERMS WITH RESPECT TO ANY CLAIM EXCEED ONE HUNDRED DOLLARS ($100.00).
Return Policy
The Canon Online Store will accept, for return or exchange, defective or unopened merchandise purchased at the Canon Online Store, subject to the exceptions and timeframe for returns listed below: All merchandise returned to the Canon Online Store must be in the original packaging with all original items (such as manuals, cables, etc.) accompanying the merchandise and a copy of the invoice/packing slip included to be eligible for return or exchange. Shipping and handling fees from your original order will not be refunded, unless the merchandise is determined by the Canon Online Store, in its sole discretion, to be defective.
See Return Policy for complete information.
Overview
The VB-M641VE Vandal Resistant Outdoor Fixed Dome Network Camera is both IP66 and IK10 rated, and is designed to provide extremely high-quality images in a range of environments and applications. The new infrared (IR) corrected Canon 2.4x Optical Zoom lens with its 111.5° angle of view incorporates Super-UD elements to help reduce chromatic aberrations and an anti-reflective infrared (IR) lens coating to help improve IR sensitivity and reduce ghosting and flaring in night mode. The cameras advanced optics, combined with a 1.3 megapixel high-sensitivity CMOS sensor and Canon's advanced DIGIC DV III Image Processor help to ensure exceptional image quality and low-light performance. The VB-M641VE is also equipped with a powerful Canon DIGIC NET II Processor for simultaneous streaming of H.264 and M-JPEG video streams in multiple resolutions for versatile monitoring and recording (including monitoring on compatible smart phones and tablets).
The VB-M641VE includes Canon's unique Remote Adjustment Function which allows an installer to reposition the cameras pan/tilt/rotation angles, as well as its zoom remotely after the camera is installed. By allowing the repositioning to be done remotely, the installer can save valuable time by concentrating on mounting and powering a camera without the worry and time consuming tasks of setting its exact position.
The VB-M641VE offers an optional heater unit which further expands the products usability in harsher environments. It also offers multiple power options including 12 VDC, 24 VAC, and PoE, and two-way audio communication is also possible when a speaker and microphone are connected to the camera.
Canon has also simplified the integration and management of the VB-M641VE. ONVIF 2.4.2 Profile S and Profile G conformance facilitates quick and easy camera integration into a security system, while the new Canon Camera Management Tool (CCMT) permits a user to configure and manage most Canon devices from a single screen.
The VB-M641VE also comes equipped with a wide selection of image-enhancing technologies, including Canon's new Haze Compensation and Area-Specific Data Size Reduction (ADSR), as well as a selection of On-board Video Analytics which includes Moving Object Detection, Removed and Abandoned Object Detection, and new Scream and Intrusion Detection capabilities.
For a sturdy camera that provides extensive coverage and an impressive list of features, count on the VB-M641VE for the reliability and clarity that's Canon.
Technical Specifications
CAMERA
Night Mode: 0.3 m (12 in.) - infinity
Light Source: Daylight Fluorescent/White Fluorescent/Warm Fluorescent/Mercury Lamp/Sodium Lamp/Halogen Lamp
Manual: One-shot WB/R Gain/B Gain
Auto: 3 levels
Manual: 7 levels
Auto: 3 levels
Manual: 7 levels
Tilt: 20.7 ° /sec.
Rotation: 40.0 ° /sec.
- Camera Angle Setting Tool Required
SERVER
Items to Reg.: Digital Pan/Digital Tilt/Digital Zoom, Exposure, Smart Shade Control, Focus, White Balance, Video Quality Adjustment, Day/Night, Haze Compensation
Number of Preset Tour Route: Max. 1
Cropping sizes: 640 x 360/512 x 288/384 x 216/256 x 144/128 x 72 640 x 480/512 x 384/384 x 288/256 x 192/128 x 96
INTERFACE
OPERATING ENVIRONMENT
When the heater unit (sold separately) is installed Operating Temperature Range:
AC: -40 ° C - +55 ° C (-40 ° F - +131 ° F)
DC, PoE: -10 ° C - +55 ° C (+14 ° F - +131 ° F)
Start-up Temperature Range:
AC: -30 ° C - +55 ° C (-22 ° F - +131 ° F)
DC, PoE: -10 ° C - +55 ° C (+14 ° F - +131 ° F)
- Sunshade cover (sold separately) necessary when under direct sun exposure
When the heater unit (sold separately) is not installed AC, DC, PoE: -10 ° C - +55 ° C (+14 ° F - +131 ° F)
- Sunshade cover (sold separately) necessary when under direct sun exposure
STORAGE ENVIRONMENT
POWER SUPPLY
POWER CONSUMPTION
Max. approx. 10.6 W (240 V AC)
Max. approx. 21.7 W*
* When the heater unit is installed (sold separately)
OTHER
Product Disclaimer
“ONVIF” and 
are trademarks of ONVIF Inc..