Web Content Viewer


ML-100 M58

Machine Vision Cameras

Item Code: 4842C001AA


The ML-100 M58 employs a 35mm full-frame CMOS sensor that is capable of shooting in extreme low light situations. The camera has approximately 2.73 million pixels with a minimum illumination of 0.0005 lux (equivalent to approximately ISO 4,000,000).

The ML-100 M58 comes with a CoaXPress BNC terminal, which offers greater flexibility for image processing and camera control, while bringing out the full potential of the ultra-sensitive CMOS sensor.

The ML-100 M58 comes in a box-style design which allows the camera to be easily configured with a wide range of system devices. The ML-100 M58 is more than 50% smaller while maintaining the sensitivity performance of the ME20F-SH. Its modularity allows it to be used in Industrial Machine Vision applications.


Effective Pixels

2152 x 1270 (2.74 megapixels)

Total Pixels

2220 x 1360 (3.02 megapixels)

Sensor Type


Sensor Size

Full Frame

Sensor Modes

Full Frame, center cropping to 1920x1080, 1280x720

Pixel Pitch

19 μm

Scanning System



RGB Primary Color Filter (Bayer Array)

Imaging Processor


Lens Mount

M58 screw-on type with flexibility to use adapters to various mount types

Exposure Modes

Controlled according to GenICam specifications for ML-100 M58:

(a) Setting the shutter speed and gain manually
(b) Auto (auto-adjusts shutter and gain together)
(e) AGC (auto gain control): Auto-adjusts gain with fixed aperture and shutter speed

Metering Modes

Gain: 0dB to 75dB
ISO: 800 to 4,560,000

Auto Gain Control (AGC)

Select between OFF (75 dB) or a value from 36 dB to 75 dB (in 3 dB increments)

Iris Settings

Lens control independent of camera control due to M58 mount

Focus Control

Lens control independent of camera control due to M58 mount


RAW Output
2152 x 1272 (full view)
Approx. 97 fps 8-bit to 54 fps 16-bit
1920 x 1080 (center-cropped)
Approx. 114 fps 8-bit to 72 fps 16-bit
1280 x 720 (center-cropped)
Approx. 164 fps 8-bit to 162 fps 16-bit


No on-board recording, Bayer RAW Output over CoaXPress (8/10/12/16-bit)


RAW Video Output, Power Input, GenICam Control

Remote Terminals

Remote camera control done through CoaXPress interface GenICam Protocol

Camera Control Unit

CoaXPress Interface via GenICam Protocol

Power Terminal

Power over BNC Connector via CoaXPress Interface


(Width x height x depth)
Approx. 76 x 76 x 83 mm (3.0 x 3.0 x 3.3 in)
* Dimensions exclude the protruding portion


Approx. 550 g (1.2 lb)

Temperature and Humidity

Approx. -20°C to 50°C, 5 to 85% RH (no condensation)

† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.

 Return to Top