Feedback
Web Content Viewer
Actions
in the top right of the browser
next to your download
next to your download
in the top right of the browser
located on the right of the address bar
CANON U.S.A.,Inc. MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
CANON U.S.A.,Inc. SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
I have read and understand the information above, and wish to download the designated software.
CR-X500
Contact Support
CR-X500
Color
Operating Condition
Image Sensor
Type 1.0 (1.0 in.) single-plate CMOS sensor
Total pixels: approx. 13.40 megapixels
Effective pixels: approx. 8.29 megapixels (3840 x 2160)
Lens
f=8.3 – 124.5 mm, F/2.8 – 4.5, 15x optical zoom, 9-bladed iris diaphragm
35mm equivalent focal length: approx. 25.5 (W) – 382.5 mm (T)
Zoom
Optical: 15x
Advanced Zoom FHD: 30x
Lens Configuration
Image Stabilizer
Optical-shift
Shutter Speed
Auto, Manual 1/3 – 1/1000 sec.
Iris
Auto, Manual
Gain
Auto, Manual 0 db ～ 33.0 dB
ND Filter
Built-in (Off, 1/4, 1/16, 1/64), motor operated
Color Sampling
4:2:2, 10-bit
White Balance
AUTO (AWB), Set
Focus
Dual Pixel CMOS AF
Gamma
Normal1: BT.709, Normal1: BT.2020, Wide DR: BT709, Wide DR: BT2020, PQ: BT2020, HLG: BT2020, Canon Log 3: BT709, Canon Log 3: BT2020
Image Quality Adjustment
Master Pedestal, R-Gain, B-Gain, R-Black, B-Black, Gamma, Color Matrix, Knee, Skin Detail, Sharpness, Black Gamma, Noise Reduction
Min. Subject Illumination
Approx. 3 lux (shutter speed 1/60 sec., Frame Rate 59.94P, Gain 33.0 dB)
Pan and Tilt
Pan operation range: Horizontal ±170°
Pan operation speed: 0.5° ~ 25°/sec.
Tilt operation range: Vertical -50° ~ +30°
Tilt operation speed: 0.3° ~ 20°/sec.
Pan, Tilt, Zoom operation
Simultaneous
Repeatability
± 7'
Turning Radius
Pan: 620mm dia., Tilt: 430mm dia.
SDI
3840x2160: 59.94P (4:2:2 10 bit)
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
Supported Control Protocols
Canon NU Protocol
Control Terminal
RS-422 Serial
12G-SDI OUT Terminal
BNC jack (output only) x 1
GEN-LOCK Terminal
BNC jack x 1
AUX Terminal
Yes
Dustproof Waterproof Rating
IP55
Wiper
Yes
Paint
Salt-resistant
Noise
Less than NC55 under 10° / sec.
Wind Resistance
Normal Operation: 0-25m/s
Operation Possible: 25-35m/s
Non-Destructive: 35-60m/s
Operating Environment
Temperature: -15°C – +40°C (+5°F – +104°F)
Humidity: 10% – 90% (without condensation)
Power Source
External: DC 10.5-15 V, 90W
Dimensions (W x H x D)
Approx. 337 x 390 x 386 mm (13.27 x 15.35 x 15.2 in.) (excluding protrusions)
Weight
Approx. 17.0 kg (37.48 lbs.)
Supported Controllers
Hardware: RC-IP100
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.
Drivers & Downloads
Supporting Documents
Manuals
Compatible Supplies & Accessories
Canon offers a wide range of compatible supplies and accessories that can enhance your user experience with you CR-X500 that you can purchase direct. Scroll down to easily select items to add to your shopping cart for a faster, easier checkout. Visit the Canon Online Store
RC-IP100
Canon’s RC-IP100 controller provides IP control for up to 100** supported Canon cameras*. Additionally, through the serial port, the RC-IP100 can control one compatible Canon camera via the NU protocol. The controller is equipped with a large 7” diagonal touch screen, zoom lever and joystick in order to pan, tilt, zoom and change camera picture settings with precise precision. The smooth responsiveness of the joystick allows operators to capture on-air movements with confidence. Pair this controller with a supported Canon PTZ camera to create the ideal camera/controller combination into your video production. *Supported Canon cameras include the CR-N500 and CR-N300.
** 99 units when RS-422 connected
CR-X500 Whats In The Box
- Camera body
- Waterproof Tube
- Control Connector
- Ferrite Core (x3)
- Printed Documents