CANON U.S.A.,Inc. MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
CANON U.S.A.,Inc. SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
I have read and understand the information above, and wish to download the designated software.
IPS LCD panel
17.3 inch (43.8 cm)
3840 x 2160 (8.3 megapixels)
Active display area
Approx. 381.9 x 214.8 mm
99 µm / 255 ppi
8 bit for each RGB color
Viewing Angle (Up, Down, Left, Right)
89° (contrast ratio 10:1 or higher)
Anti glare coating
White LED, direct down type
AC 100-240 V Rated frequency: 50/60 Hz
DC 12 V Max. 10 A, XLR terminal
At Maximum Load (including change in brightness through aging): Approx. 140 W
At Factory Shipment: Approx. 85 W
Temperature and humidity: 0 to 40 °C (32 - 104 °F) (20 - 85 % RH no condensation), recommended: 15 - 30 °C (59 - 86 °F)
Pressure: 700 - 1060 hPa
Storage / Transporting
Temperature and humidity:
-20 - 40 °C (-4 - 104 °F) (20 - 85 % RH no condensation)
41 - 60 °C (105 - 140 °F) (20 - 30 % RH no condensation)
Pressure: 700 - 1060 hPa
Dimensions (Width x Height x Depth)
With stand and handle: Approx. 435 x 356 x 194 mm (17.1 x 14.0 x 7.6 in.)
Display unit only, without protruding parts: Approx. 435 x 308 x 154 mm (17.1 x 12.1 x 6.1 in.)
Approx. 17.6 lbs (8 kg)
Mounting Hole Pitch
VESA standard 100 x 100 mm (3.9 x 3.9 in)
4 (6G:2 pass-thru systems, 3G/HD-SDI: 1 pass-thru system)
1(1 system) Type A terminal (4K 60P Support)
Copy protection: HDCP 2.2
4(6G:2 pass-thru systems, 3G/HD-SDI: 1 pass-thru system)
1 stereo mini-jack. Supported impedance: 32-64Ω
1 USB A receptacle terminal. Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed) / FS (Full Speed) / HS (High Speed) mode compatible. Enhanced Host Controller Interface Specification for Universal Serial Bus Revision 1.0 compliant.
1 RJ-45 terminal IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant
1 RJ-45 terminal, GPI 8 pin
AC Power Cord, Instructional Manual, AC Power Cord Clamp
Protect Panel (PP-17U)
Rack Mount Bracket (RB-02)
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.
Drivers & Downloads
Product Advisories for DP-V1710
|Firmware Notice: DP-V1710: Firmware Version 1.1||Firmware Notice||Jun 5, 2017|
|Firmware Notice: DP-V1710: Firmware Version 1.2||Firmware Notice||Nov 19, 2018|
|Firmware Notice: DP-V1710: Firmware Version 1.3||Firmware Notice||May 24, 2019|
|Firmware Notice: DP-V1710: Firmware Version 1.4||Firmware Notice||Jun 10, 2020|
|Firmware Notice: DP-V1710: Firmware Version 1.4.1||Firmware Notice||Jul 31, 2020|
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY
The limited warranty set forth below is given by Canon U.S.A., Inc. ('Canon USA') with respect to Canon Professional Display Equipment ('the 'Equipment') accompanying this limited warranty in the Equipment's original container, when purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
This Limited Warranty covers all defects encountered in normal use of the Equipment and does not apply in the following cases:
This Limited Warranty does not apply to Equipment purchased outside the United States. This Limited Warranty does not apply to accessories or consumables for the Equipment, which are sold "AS IS", without warranty of any kind by Canon USA. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card ensures that you are contacted promptly should there be a safety inspection, modification or product recall under applicable laws or regulations.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Luminance Boost Service Upgrade
Thank you for using Canon products. Canon is offering luminance upgrades for its 17” reference displays. Interested parties can call our support centers to make arrangements for this service.
An optional license upgrade is available to increase the maximum luminance value of the Canon DP-V1710 and DP-V1711 reference displays from 300 to 600 nits.
Above images are simulated and do not represent the true white point/luminance values of DP-V1710 and DP-V1711 reference displays
The price of the upgrade is fixed: $1,000 per unit.
|Contact Information for Inquiries|
|Canon Customer Support Center|
|For additional support options: pro.usa.canon.com/support|