CANON U.S.A.,Inc. MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
CANON U.S.A.,Inc. SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
I have read and understand the information above, and wish to download the designated software.
IPS LCD panel
24 inch (61.1 cm)
4096 x 2160 (8.8 megapixels)
Active display area
Approx. 21.2 x 11.2 in. / 540.7 x 285.1 mm
132 µm/193 ppi
1024 Gradations (10 bits for each color)
Peak, Full screen white
600 cd/m2 (When Boost On is selected: 1000 cd/m2)
Viewing Angle (Up, Down, Left, Right)
89° (contrast ratio 10:1 or higher)
Anti glare coating
LED, Matrix Array
Rated voltage: AC 100 - 240 V Rated frequency: 50/60 Hz
DC 24 V max. 10 A, XLR terminal
At Maximum Load (including change in brightness through aging): Approx. 230W
At Factory Shipment: Approx. 130W
Temperature and humidity: 0 to 40 °C (32 - 104 °F) (20 - 85 % RH no condensation), recommended: 15 - 30 °C (59 - 86 °F)
Pressure: 700 - 1060 hPa
Storage / Transporting
Temperature and humidity:
-20 - 40 °C (-4 - 104 °F) (20 - 85 % RH no condensation)
41 - 60 °C (105 - 140 °F) (20 - 30 % RH no condensation)
Pressure: 700 - 1060 hPa
Dimensions (Width x Height x Depth)
Approx. 22.68 x 17.20 x 7.09 (576×437×180 mm), including handle and stand
Approx. 22.68 x 15.24 x 4.13 (576×387×105 mm), Display unit only, without protruding parts
Approx. 26.4 lb. (12 kg)
Mounting Hole Pitch
VESA standard 100 x 100 mm (3.9 x 3.9 in)
4 (1 system) BNC (75Ω) Receptacle terminal
12G-SDI: SMPTE 2082 compliant
6G-SDI: SMPTE 2081 compliant
3G-SDI: SMPTE 2048-2/274M/296/372/425-5/425-3/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
SD-SDI: SMPTE 259M compliant
1 Type A Copy protection: HDCP 2.2
1 stereo mini-jack. Supported impedance: 32Ω - 64Ω
1 USB A receptacle terminal
Universal Serial Bus Specification Revision 2.0 compliant LS (Low Speed) / FS (Full Speed) / HS (High Speed) mode compatible
Enhanced Host Controller Interface Specification for Universal Serial Bus Revision
1 RJ-45 terminal
IEEE8-2.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant
1 RJ-45 terminal, GPI 8 pin
AC Power Cord, Instructional Manual, AC Power Cord Clamp
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.
Drivers & Downloads
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY
The limited warranty set forth below is given by Canon U.S.A., Inc. ('Canon USA') with respect to Canon Professional Display Equipment ('the 'Equipment') accompanying this limited warranty in the Equipment's original container, when purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
This Limited Warranty covers all defects encountered in normal use of the Equipment and does not apply in the following cases:
This Limited Warranty does not apply to Equipment purchased outside the United States. This Limited Warranty does not apply to accessories or consumables for the Equipment, which are sold "AS IS", without warranty of any kind by Canon USA. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card ensures that you are contacted promptly should there be a safety inspection, modification or product recall under applicable laws or regulations.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.