Firmware Version 01.060200 incorporates the following improvements:
- Changes the specifications so that the 1280x800 and 1600x1000 resolution settings of input devices are supported.
- Corrects a malfunction in which the lens does not move to a saved lens position when [load position] is selected.
- Corrects a malfunction where the LAN connection may be interrupted when using Crestron Fusion to connect the projector to a computer.
Please check the firmware version on your projector. If it is running Version 01.000000 or an earlier version, then it should be updated to Version 01.060200.There is no action necessary if the projector's firmware is Version 01.060200. After the firmware update, it is possible to restore the projector to a previous firmware version. For customers who wish to restore the projector to a previous firmware version, please contact your local service center.
For details on how to check the firmware version, please see the manual for the projector.
Preparations for updating the firmware
If you wish to perform the firmware update, please download the firmware and the firmware update procedure guide from our Web site.
Regarding the Software Included in this Firmware
The software included in this firmware is comprised of software modules developed by both Canon and third parties.
Software Developed by Canon and Free Software
Software developed or created by Canon and accompanying document is protected by copyright law, terms of an international convention and any other governing laws.
This product uses software modules under copyright by third parties and distributed as free software. Some of these software modules are subject to the GNU General Public License v2 (GPL), GNU Lesser General Public License v2.1 (LGPL) or any other license.
Display of License Information of Free Software Modules Included in this Firmware
The license information required to be displayed for the free software modules included with this firmware is saved in the download file. If you want to check the license list, please see the ThirdPartySoftware.pdf file in the thirdparty_software LICENSE folder. Furthermore, if you want to check the license for each of the free software modules, please see the text file stored in the thirdparty_software LICENSE folder.
Obtaining Source Codes of Free Software
Some free software modules require the acquisition of the source code in order to distribute the executable form of those software modules. To obtain the source code for the software modules, please contact the Canon Regional Headquarters for your country of residence.