Web Content Viewer
CANON U.S.A.,Inc. MAKES NO GUARANTEES OF ANY KIND WITH REGARD TO ANY PROGRAMS, FILES, DRIVERS OR ANY OTHER MATERIALS CONTAINED ON OR DOWNLOADED FROM THIS, OR ANY OTHER, CANON SOFTWARE SITE. ALL SUCH PROGRAMS, FILES, DRIVERS AND OTHER MATERIALS ARE SUPPLIED "AS IS." CANON DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
CANON U.S.A.,Inc. SHALL NOT BE HELD LIABLE FOR ERRORS CONTAINED HEREIN, OR FOR LOST PROFITS, LOST OPPORTUNITIES, CONSEQUENTIAL OR INCIDENTAL DAMAGES INCURRED AS A RESULT OF ACTING ON INFORMATION, OR THE OPERATION OF ANY SOFTWARE, INCLUDED IN THIS SOFTWARE SITE.
I have read and understand the information above, and wish to download the designated software.
EOS Rebel T3i Body
Contact Support
All times ET, excluding holidays.
EOS Rebel T3i Body
Drivers & Downloads
If your Operating System (OS) does not display please select from the drop-down list below, to access available drivers, software, firmware and utilities.
Supporting Documents
Manuals
EOS DIGITAL CAMERA LIMITED WARRANTY
For The U.S.A. And Canada Only
The limited warranty set forth below is given by Canon U.S.A., Inc. (Canon U.S.A.) in the United States or Canon Canada Inc., (Canon Canada) in Canada with respect to the Canon brand EOS Digital Camera (the “Product”) *, when purchased and used in the United States or Canada. The Product purchased with this limited warranty is the only EOS Digital Camera to which this limited warranty applies.
Canon U.S.A., Inc. and Canon Canada Inc. (collectively "Canon") warrant to the original end-user purchaser, when delivered in new condition in its original container, that the Product will be free from defects in materials and workmanship under normal use and service for a period of one (1) year from the date of original purchase. Product returned to a Canon repair facility and proven to be defective upon inspection will, at Canon’s sole discretion and without charge, be (a) repaired utilizing new, remanufactured, repaired and/or recycled parts; (b) exchanged for a new Product or; (c) exchanged for a refurbished Product, as determined by the Canon repair facility. Warranty exchange or replacement does not extend the original warranty period of the Product.
THIS WARRANTY DOES NOT COVER ANY ACCESSORIES. This limited warranty shall only apply if the Product is used in conjunction with compatible computer equipment and compatible software, as to which items Canon U.S.A. or Canon Canada, shall have no responsibility. Non-Canon brand equipment and software that may be distributed with the Product are sold "as is" and without warranty of any kind by Canon U.S.A. or Canon Canada, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with the respect to such non-Canon brand items is given by the manufacturer or producer thereof.
This limited warranty covers all defects encountered in normal use of the Product, and does not apply in the following cases:
- Loss of or damage to the Product due to abuse, mishandling, improper packaging by you, alteration, accident, electrical current fluctuations, failure to follow operating, maintenance or environmental instructions prescribed in Canon U.S.A.'s or Canon Canada's user's manual or services performed by someone other than Canon U.S.A. or Canon Canada, or a Canon authorized service provider for the Product. Without limiting the foregoing, water damage, sand/corrosion damage, battery leakage, dropping the Product, scratches, abrasions or damage to the body, lenses or LCD display or damage to the any of the accessories mentioned in the first paragraph above will be presumed to have resulted from misuse, abuse or failure to operate the Product as set forth in the operating instructions
- Use of parts or supplies (other than those sold by Canon U.S.A. or Canon Canada) that cause damage to the Product or cause abnormally frequent service calls or service problems
- If the Product has had its serial number or dating altered or removed.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND CANON U.S.A. OR CANON CANADA (SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU)..NEITHER CANON U.S.A. NOR CANON CANADA SHALL BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE OR MISUSE OF, OR INABILITY TO USE, THE EOS DIGITAL CAMERA, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON U.S.A. OR CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR CANON CANADA BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY CANON USA OR CANON CANADA AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR MISUSE OF, OR INABILITY TO USE, THE PRODUCT NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF CANON USA OR CANON CANADA (SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU). THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT, OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY.
Canon U.S.A.
You may obtain technical support** for your Product as follows:
E-mail support via our Web site at www.canontechsupport.com
Telephone assistance from a Canon U.S.A. Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666)
Canon Canada
You may obtain technical support* for your Product as follows:
Telephone assistance from a Canon Canada Customer Care representative free of charge during regular business hours at 1-800-OK-CANON (1-800-652-2666)
When you call, have your Product serial number and your date of purchase available to expedite service. A Canon Customer Care representative will attempt to diagnose the nature of the problem and correct it over the telephone. If the problem cannot be corrected over the telephone, you will be asked to follow the applicable procedures for MAIL-IN SERVICE. Note that a dated proof of purchase is required at the time of service. This requirement will be satisfied by providing a copy of your dated bill of sale.
** Technical support program specifics subject to change without notice.
MAIL-IN SERVICE is a program under which your Product is repaired by a Canon U.S.A. or a Canon Canada authorized service center for the Product. Authorized service center information can be obtained by visiting www.canontechsupport.com (US customers only) or by contacting the Canon U.S.A., Customer Care Center or Canon Canada Customer Information Centre at 1-800-OK-CANON (1-800-652-2666). You will be given the name, address and phone number of an authorized service center.
It is your responsibility to properly package and send the defective Product, together with a copy of your dated proof of purchase, a complete explanation of the problem and a return address to the authorized service center at your expense. Do not include any other items with the defective Product. The Product covered by this limited warranty and proven to be defective upon inspection will be repaired and returned to you without charge by the authorized service center. Any Product received by the authorized service center that is not covered by the limited warranty will be returned unrepaired, or at the discretion of the authorized service provider, you may receive a written estimate of repair at such cost as the service center may establish from time to time.
This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state (or province to province in Canada).
*The battery pack packaged with the Product carries a separate ninety (90) day limited warranty.
Type
Digital, AF/AE single-lens reflex, camera with built-in flash
Recording Media
SD/SDHC/SDXC card, via external media (USB v.2.0 hard drive, or via Wireless LAN (Eye-Fi card*))
*Canon cameras are not guaranteed to support Eye-Fi card functions, including wireless transfer. In case of an issue with the Eye-Fi card, please consult with the card manufacturer. The use of Eye-Fi cards may not be approved in all regions, or from one region to another; please contact the card manufacturer for status of approval in the country/region of use.
Image Format
22.3 x 14.9 mm (APS-C size)
Compatible Lenses
Canon EF lenses including EF-S lenses
(35mm-equivalent focal length is approx.1.6x the lens focal length)
Lens Mount
Canon EF mount
Type
High-sensitivity, high-resolution, large single-plate CMOS sensor
Pixels
Effective pixels: Approx. 18.0 megapixels
Total Pixels
Total pixels: Approx. 18.70 megapixels
Aspect Ratio
3:2 (Horizontal : Vertical)
Color Filter System
RGB primary color filters
Low Pass Filter
Fixed position in front of the CMOS sensor
Dust Deletion Feature
(1) Automatic Sensor Cleaning Removes dust adhering to the low-pass filter. Self-cleaning executed automatically (taking 2 sec.) when power is turned on or off. Manual execution also possible (taking 5 sec.).Low-pass filter has a fluorine coating.(2) Dust Delete Data appended to the captured image The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images. The dust coordinate data appended to the image is used by the provided software to automatically erase the dust spots.(3) Manual cleaning of sensor
Recording Format
Design rule for Camera File System 2.0 and 2.30
File Size
(1) Large: Approx. 17.90 Megapixels (5,184 x 3,456)
(2) Medium: Approx. 8.00 Megapixels (3,456 x 2,304)
(3) Small: Approx. 4.50 Megapixels (2,592 x 1,728)
(4) S2: Approx. 2.50 Megapixels (1,920 x 1,280)
(5) S3: Approx. 0.35 Megapixels (720 x 480)
(6) RAW: Approx. 17.90 Megapixels (5,184 x 3,456)
Exact file sizes depend on the subject, ISO speed, Picture Style, etc.
Recording Functions
Images record directly to the SD card.
File Numbering
Consecutive numbering, auto reset, manual reset.
RAW + JPEG Simultaneous Recording
RAW and Large JPEG images are recorded simultaneously
Color Space
sRGB, Adobe RGB
Picture Style
Auto, Standard, Portrait, Landscape, Neutral, Faithful, Monochrome, User Defined 1-3
Settings
Auto, Daylight, Shade, Cloudy, Tungsten Light, White Fluorescent Light, Flash, Custom
Auto White Balance
Auto white balance with the image sensor
Color Temperature Compensation
White balance correction:Blue/amber bias: ±9 levels Magenta/green bias: ±9 levels White balance bracketing:±3 levels, in single-level increments
Color Temperature Information Transmission
Provided
Type
Eye-level SLR (with fixed pentamirror)
Coverage
Vertical/Horizontal approx. 95% (TD)
Magnification
Approx. 0.85x / 23.8° (with 50mm lens at infinity, -1 m-1 (dpt))
Eye Point
Approx. 19 mm (At -1m-1 from the eyepiece lens center)
Dioptric Adjustment Correction
Adjustable from approx. -3.0 to +1.0 m-1 (dpt)
Focusing Screen
Fixed
Mirror
Quick-return half mirror (transmittance: reflectance ratio of 40:60)
Viewfinder Information
1) AF information (AF points, focus confirmation light)
2) Exposure information (Shutter speed, aperture, ISO speed, AE lock, exposure level, spot metering circle, exposure warning)
3) Flash information (Flash ready, flash exposure compensation, high-speed sync, FE lock, red-eye reduction light)
4) Image information (Highlight tone priority, Monochrome shooting, maximum burst, white balance correction, SD card information)
5) Composition information (Grid, electronic level)
6) Battery check
Depth Of Field Preview
Enabled with depth-of-field preview button
Type
TTL-CT-SIR AF-dedicated CMOS sensor
AF Points
9 points (Center AF point is AF cross-type at f/5.6, Center AF point is vertical line-sensitive at f/2.8.)
AF Working Range
EV -0.5 - 18 (at 23°C/73°F and ISO 100, based on Canon's testing standards)
Focusing Modes
(1) Autofocus One-Shot AF Predictive AI Servo AFAI Focus AF(2) Manual focus (MF)
AF Point Selection
(1) Manual selection
(2) Auto selection
* Automatically set (2) in Basic Zone modes and A-DEP mode.
Selected AF Point Display
Indicated by superimposed display in the viewfinder and on the LCD monitor
AF Assist Beam
(1) Intermittent firing of built-in flash
(2) Effective range: Approx. 4 m/13.1 ft at center, approx. 3.5 m/11.5 ft at periphery
* With an EOS-dedicated Speedlite attached, the Speedlite's AF-assist beam is emitted instead.
* Compatible with assist-beam (intermittent firing) of 320EX, 270EX II and 270EX flashes.
Metering Modes
TTL maximum aperture metering with 63-zone metering sensor Evaluative metering (linkable to all AF points)Partial metering (center, approx. 9% of viewfinder at center)Spot metering (center, approx. 4% of viewfinder at center)Center-weighted average metering
Metering Range
EV 1.0 - EV 20.0 (at 73°F/23°C with EF50mm f/1.4 USM lens, ISO 100)
Exposure Control Systems
Program AE (Shiftable), Shutter-priority AE, Aperture-priority AE, Manual exposure, Automatic depth-of-field, Scene Intelligent Auto, Flash Off, Creative Auto, Programmed Image Control modes, E-TTL II autoflash program AE
ISO Speed Range
Auto, ISO 100 - 6400 (in whole-stop increments), H: 12800
Exposure Compensation
Manual: ±5 stops in 1/3- or 1/2-stop increments (AEB ±2 stops)
* Indicated up to ±3 stops in the viewfinder.
AE Lock
Auto: Applied in One-Shot AF mode with evaluative metering when focus is achieved
Manual: By AE lock button
Type
Vertical-travel, mechanical, focal-plane shutter with all speeds electronically controlled.
Shutter Speeds
1/4000 to 1/60 sec., X-sync at 1/200 sec.
1/4000 to 30 sec., Bulb (Total shutter speed range. Available range varies by shooting mode.)Settable in 1/3- or 1/2-stop increments.
Shutter Release
Soft-touch electromagnetic release
Self Timer
10-sec. or 2-sec. delay
Remote Control
(1) The EOS Rebel T3i has a remote control terminal for Remote Switch RS-60E3.
(2) Compatible with Remote Controller RC-6, RC-1 and RC-5.
Type
Auto pop-up, retractable, built-in flash in the pentaprism
Flash Metering System
E-TTL II autoflash
Guide Number
Approx. 13/43 (at ISO 100 in meters/feet)
Recycling Time
Approx. 3 sec.
Flash Ready Indicator
Flash-ready icon lights in viewfinder
Flash Coverage
Up to 17mm focal length (equivalent to approx. 28mm in 135 format)
FE Lock
Provided
Flash Exposure Compensation
Up to ±2 stops in 1/3- or 1/2-stop increments
Flash exposure compensation for built-in flash and Speedlite can be set with the camera.
Flash Metering
E-TTL II autoflash
Flash Exposure Compensation
±2 stops in 1/3-stop or 1/2-stop increments
FE Lock
Provided
Drive Modes
Single, Continuous, 10-sec. self-timer/Remote control, 2-sec. self-timer, Continuous shooting after 10-sec. self-timer
Continuous Shooting Speed
Max. approx. 3.7 fps [TD] (with One-Shot AF or AI SERVO AF)
* Same as with Battery Grip BG-E8 loaded with size-AA/LR6 alkaline batteries.
Maximum Burst
JPEG (Large/Fine): approx. 34
RAW: approx. 6
RAW+JPEG (Large/Fine): approx. 3
* The number of possible shots and maximum burst apply to a 4GB card based on Canon's testing standards.
* The image file size, number of possible shots, and maximum burst will vary depending on the shooting conditions (3:2 aspect ratio, subject, memory card brand, ISO speed, Picture Style, Custom Functions, etc.).
* F indicates that continuous shooting is possible until the card becomes full.
Shooting Modes
Still photo shooting and video shooting
Focusing
(1) Autofocus (Same as focusing with Live View shooting)
Before shooting a movie, 1, 2, and 3 below are possible.
AF during movie shooting is possible with [AF w/ shutter button during video]. When this is set to [Enable], 1 and 2 below are possible:
A. Live mode
B. Face detection Live mode
C. Quick mode
* If 3 has been set when you start shooting a movie, it will switch to 1 automatically.
(2) Manual focusing
* Magnify the image by about 5x or 10x and focus manually.
* Magnified view not possible with digital zoom nor during movie shooting.
Metering Modes
(1) AF point-linked evaluative metering
* Used when the AF mode is Face detection Live mode and a face has been detected.
(2) Center-weighted average metering
* Used during manual focus, when the AF mode is Face detection Live mode and a face has not been detected. Also used in the Live mode and Quick mode.
* Metering range: EV 0 to EV 20 (At 23°C/73°F and ISO 100, with 50mm f/1.4 lens)
Metering Range
EV 0 to EV 20 (At 23°C/73°F and ISO 100, with 50mm f/1.4 lens)
Grid Display
Two grids provided (not displayed during movie shooting):
(1) Grid 1: Pair of vertical and horizontal lines
(2) Grid 2: 5 vertical and 3 horizontal lines
Exposure Simulation
Provided
Silent Shooting
Not provided
File Format
MOV (image data: H.264; audio: Linear PCM (monaural))
* Meta information is embedded in the MOV file (no separate THM file)
File Size
Recording Size: 1920 x 1080 (Full HD), 1280 x 720 (HD), 640 x 480 (SD)* The file system limits the file size of a single movie clip to 4 GB. If the movie clip reaches 4 GB, the shooting will stop automatically. This translates to around 11 min. for 1920 x 1080 and 1280 x 720, and around 46 min. for 640 x 480.* Even if the file size of a single movie clip is within 4 GB, movie shooting will automatically terminate when the movie time reaches 29 min. 59 sec.
Frame Rates
24, 25, 30, 50, or 60 fps (30 fps during magnified view)
Focusing
(1) Autofocus (Same as focusing with Live View shooting)
Before shooting a movie, A, B, and C below are possible.
AF during movie shooting is possible with [AF w/ shutter button during video]. When this is set to [Enable], A and B below are possible:
A. Live mode
B. Face detection Live mode
C. Quick mode
* If C has been set when you start shooting a movie, it will switch to A automatically.
(2) Manual focusing
* Magnify the image by about 5x or 10x and focus manually.
* Magnified view not possible with digital zoom nor during movie shooting.
Exposure Control
Program AE for video shooting, Manual exposure
Exposure Compensation
±3 stops in 1/3-stop increments
Type
TFT color, liquid-crystal monitor
Monitor Size
3.0 in. (Screen aspect ratio of 3:2)
Pixels
Approx. 1,040,000 dots
Coverage
Approx. 100%
Viewing Angle: 170°
Brightness Control
Adjustable to one of seven brightness levels
Interface Languages
25 (English, German, French, Dutch, Danish, Portuguese, Finnish, Italian, Norwegian, Swedish, Spanish, Greek, Russian, Polish, Hungarian, Czech, Romanian, Ukraine, Turkish, Arabic, Thai, Simplified Chinese, Traditional Chinese, Korean and Japanese)
Display Format
(1) Single image display Single image, basic information, detailed information, histogram display(2) Index display4-image index and 9-image index.(3) Jump display (Image jump w/ Main Dial)1/10/100 images, shooting date, by folder, movies, stills, rating
Highlight Alert
On the detailed information and histogram displays, highlight areas with no image data will blink.
Protection
Erase protection can be applied/canceled for a single image, all images in a folder, or all images in the card.
Erase
Erase single image, erase selected images, erase all images on folder, erase all images in a card, or erase only unprotected images.
Compatible Printers
PictBridge-compatible printers
Printable Images
JPEG images complying to Design rule for Camera File System RAW images printable. Movies cannot be printed.
DPOF
Version 1.1 compatible
Custom Functions
11 Custom Functions with 34 settings settable with the camera
Camera User Settings
Not provided
USB Terminal
Hi-Speed USB-standard mini-B terminal for personal computer communications and PictBridge.
Video Out Terminal
(1) Video OUT terminal: NTSC/PAL selectable
(2) mini-HDMI OUT terminal
Battery
Battery Pack LP-E8 x 1
* With the AC Adapter Kit ACK-E8, AC power is possible.
* With BG-E8, two battery packs (LP-E8) can be used. Or six size-AA/LR6 batteries can be used.
Battery Life
1) Camera body only:
2) With Battery Grip BG-E8:
The figures above are based on CIPA (Camera & Imaging Products Association) testing standards
Battery Check
Automatic battery level check when power is turned ON.
Battery level indicated in one of four levels on LCD monitor.
Power Saving
Power turns off after the set time of non-operation elapses
* [Auto power off] settable to 30 sec., 1 min., 2 min., 4 min., 8 min., or 15 min.
Date/Time Battery
Built-in secondary battery. When fully-charged, the date/time can be maintained for about three months.
Start-up Time
Approx. 0.1 sec. (Based on CIPA testing standards)
Dimensions (W x H x D)
Approx. 5.2 x 3.9 x 3.1 in./133.1 x 99.5 x 79.7mm
Weight
Approx. 18.2 oz. / 515g (body only)
Working Temperature Range
32-104°F/0-40°C
Working Humidity Range
85% or less
All data are based on Canon's Standard Test Method. Subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the lens maker.
Canon, DIGIC and EOS Rebel are registered trademarks of Canon Inc. in the United States and may also be registered trademarks or trademarks in other countries. Microsoft, Windows and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple, Inc., registered in the United States and other countries. HDMI, the HDMI logo and High-Definition Multimedia Interface are registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries. All other products and brand names are registered trademarks, trademarks or service marks of their respective owners in the United States and/or other countries.
† Prices and specifications subject to change without notice. Actual prices are determined by individual dealers and may vary.
Product Advisories for EOS Rebel T3i Body
Title | Advisory Type | Date |
---|---|---|
Service Notice: Rebel T3i Digital SLR Camera | Service Notice | Apr 11, 2011 |
Firmware Notice: EOS Rebel T3i: Firmware Version 1.0.3 | Firmware Notice | Nov 28, 2016 |
Service Notice: EOS Utility | Service Notice | Dec 13, 2019 |
EOS Rebel T3i EF-S 18-55mm IS Kit
Compatible Supplies & Accessories
Canon offers a wide range of compatible supplies and accessories that can enhance your user experience with you EOS Rebel T3i Body that you can purchase direct. Scroll down to easily select items to add to your shopping cart for a faster, easier checkout. Visit the Canon Online Store

58mm Circular Polarizer PL-CB
Polarizing filters enhance picture quality by blocking harmful reflected light. Use it to reduce light reflections from glass and water surfaces or to improve color saturation. Simple to use, these filters polarize light circularly, rather than linearly, so they do not interfere with autofocus or TTL light metering.
MSRP: 260.0

58mm Protect Filter
These filters can help protect your lens against dust, moisture, fingerprints, scratches and damage and can be kept on your lens at all times. Filter fits select lenses with a 58mm diameter.
MSRP: 45.0

AC Adapter Kit ACK-E8
The AC Adapter Kit ACK-E8 enables the EOS Rebel T3i and EOS Rebel T2i to draw power directly from an AC power source. It is designed to supply uninterrupted power for your camera. Kit includes the AC adapter, DC coupler and power cord.
MSRP: 85.0

Angle Finder C (incl. Adapter Ec-C, Ed-C)
Angle Finder C lets you adjust the viewing angle while providing a 2.5x magnification for critical focusing with a full screen image that also shows exposure data.
MSRP: 280.0

Battery Charger LC-E8E
Charger for LP-E8 Batteries.
MSRP: 60.0

Battery Grip BG-E8
For EOS Digital Rebel T2i, T3i and T4i Cameras
MSRP: 220.0

Battery Pack LP-E8
Rechargeable Lithium-Ion Battery Pack.
MSRP: 70.0

Belkin Mini HDMI RTL
This cable is designed for connecting to your television's component input so that you can playback both high-definition video and multichannel, digital audio quality through just one cable.
MSRP: 19.99

Compact Power Adapter CA-PS700A
This is the standard power source for the Elura 40MC and Elura 50. Also compatible with the S80, S2 IS, S1 IS.
MSRP: 65.0

DC Coupler DR-E8
The Canon DR-E8 DC Coupler used in conjunction with a compatible AC adapter (not included) allows you to power your Canon EOS Rebel T3i and EOS Rebel T2i directly from an AC Power source.
MSRP: 40.0

Deluxe Back Pack 200EG
Backpack with carry handle and detachable strap. Holds 1-2 Cameras bodies, 3-4 lenses and accessories. Inside measurements (W x H x D): 10 x 14.75 x 5 inches. Rugged nylon, water-repellent, urethane coated for extra durability. Well-arranged divider system for secure storage and easy access. Lightweight construction, padded shoulder straps and back for comfort. Front webbing ideal for storing a light jacket. Tripod carrying straps. Color: Black with Olive.
MSRP: 75.0

Deluxe Gadget Bag 100EG
Waterproof bag holds 1-2 cameras and 3-4 lenses with room for accessories. Front and Rear zippered pouches. Zippered full-length mesh pouch inside top cover. Divider system for secure storage and easy access. Size: 9" (W) x 7" (H) x 5.5" (D)
MSRP: 50.0

Deluxe Gadget Bag 10EG
This gadget bag is an excellent value, with all the quality material of the Professional 1, at a slightly smaller size. It is designed to hold two 35mm SLR bodies, 5 - 8 lenses, plus film and accessories. It features full padding and interior partitions, leather reinforcing, high strength quick-release buckles, padded exterior pockets, leather snap handle and shoulder strap. Size: 10.5" (W) x 8"(H) x 7.5" (D)
MSRP: 130.0

Deluxe Tripod 200
This lightweight, high quality tripod is designed for easy portability and maximum stability. It features a 3-way pan head for precise control and smooth movement. The 3-section tubular leg construction allows for exceptional stability indoors or out.
MSRP: 45.0

Deluxe Tripod 300
The Canon Deluxe Tripod 300 was designed for ease of portability when traveling and maximum stability when used in any situation with a compatible Canon digital camera. The Deluxe Tripod 300 features a 3 way pan head for precise control while the 3 section tubular leg construction allows enhanced stability indoors and outdoors. The three-section Deluxe Tripod 300 reaches a maximum height of 62" and folds down to 23" and has a maximum load capacity is 4.4 lb.
MSRP: 45.0

Digital Gadget Bag 100DG
Designed especially for digital SLRs. Can hold your cameras, lenses, accessories and even a laptop computer. Durable, water-repellent nylon exterior. Padded interior dividers and easy-access storage pockets.
MSRP: 99.99

Digital Gadget Bag 200DG
Size 10.5"(W) x 7.5"(H) x 7"(D)
MSRP: 100.0

Dioptric Adjustment Lens E (+0.5)
The Dioptric Adjustment Lens provides near- and far-sighted users a clear viewfinder image without the use of eyeglasses. The lens fits into the eyepiece holder of you EOS camera. Please see the Compatibility tab for a list of compatible EOS cameras.
MSRP: 17.0


Dioptric Adjustment Lens E (+1)
The Dioptric Adjustment Lens provides near- and far-sighted users a clear viewfinder image without the use of eyeglasses. The lens fits into the eyepiece holder of you EOS camera.
MSRP: 17.0


Dioptric Adjustment Lens E (+2)
The Dioptric Adjustment Lens provides near- and far-sighted users a clear viewfinder image without the use of eyeglasses. The lens fits into the eyepiece holder of you EOS camera.
MSRP: 17.0


Dioptric Adjustment Lens E (-2)
The Dioptric Adjustment Lens provides near- and far-sighted users a clear viewfinder image without the use of eyeglasses. The lens fits into the eyepiece holder of you EOS camera.
MSRP: 17.0


Dioptric Adjustment Lens E (-3)
The Dioptric Adjustment Lens provides near- and far-sighted users a clear viewfinder image without the use of eyeglasses. The lens fits into the eyepiece holder of you EOS camera.
MSRP: 17.0


Dioptric Adjustment Lens E (-4)
The Dioptric Adjustment Lens provides near- and far-sighted users a clear viewfinder image without the use of eyeglasses. The lens fits into the eyepiece holder of you EOS camera. Requires Rubber Frame Ef, Eb or Ec
MSRP: 17.0


Dioptric Adjustment Lens E (0)
The Dioptric Adjustment Lens provides near- and far-sighted users a clear viewfinder image without the use of eyeglasses. The lens fits into the eyepiece holder of you EOS camera.
MSRP: 17.0

EYEPIECE EP-EX15 II
The Canon EP-EX15 II Eyepiece Extender provides a 5/8" (15mm) extension of the cameras eyepiece away from the camera body and reduces the camera's viewfinder magnification by 30%. It is particularly useful for eyeglass wearers and prevents a user's face or nose from touching the camera body or LCD display.
MSRP: 20.0

Eyecup Ef

Gadget Bag 2400
Fits DSLR and Standard Lens Kit. Made from Cordura Nylon. Large Zippered Front Accessory Pocket. Zippered Mesh Pocket Inside Top Lid. Two Side Accessory Zippered Pockets. Tripod Loops on Bottom. Five Movable, Padded Internal Dividers. Two Strap Handles with Grip. Removable Shoulder Strap. Rubber Feet for Ground Protection.

Gelatin Filter Holder Adapter III 58
58mm adapter ring. Used to attach Gelatin Filter Holder III to most EF lenses.
MSRP: 60.0

Gelatin Filter Holder Adapter IV 58
Adapter ring used to attach Gelatin Filter Holder IV to most 58mm EF lenses.
MSRP: 60.0

HTC-100
Mini-HDMI Cable: connects Canon HD Camcorders/select PowerShot Cameras to HDMI compatible TV.
MSRP: 80.0

Lens Wide Strap
Fits Many Long Telephoto Lenses.
MSRP: 40.0

MONOPOD 100
MSRP: 45.0

Magnifier MG-Ef
MSRP: 45.0

Mini Tripod 7
For use with SLR or compact cameras.
MSRP: 24.0

Monopod 500
The Canon Monopod 500 is a compact, lightweight 5-section monopod that comes with a mini-ball head. It features a foam grip on the top leg section, a hand strap, flip lock leg sections, and rubber leg tip. Maximum height of 64.5" extended and folded length of 21.9". Load capacity of 8.5 pounds. Weight of 1.1 pounds.
MSRP: 45.0

NECK STRAP EW-100DBIII
Wide neck strap.
MSRP: 20.0

Original Data Security Kit OSK-E3
MSRP: 900.0

Professional Gadget Bag 1EG
Large gadget bag for the traveling professional. Size: 14.2" (W) x 8.7"(H) x 8.3"(D). This bag is designed to hold two 35mm SLR camera bodies, seven to ten lenses, flash, film, accessories, etc. It features full padding and interior dividers for cameras and lenses, as well as padded outside pockets. Features adjustable tripod straps, and high strength buckles for the main compartment. The Canon logo is embroidered on the top flap.
MSRP: 150.0

Remote Control RC-6
Allows for wireless camera operation and shutter release with the Canon T2i, T1i, 5D, 7D, and Mark II Cameras.
MSRP: 30.0

Remote Controller Adapter RA-E3
A conversion adapter that is used with the Timer Remote Controller TC-80N3. For use with cameras with a remote control terminal which is other than N3 type, such as EOS70D.The adapter allows use of Canon Timer Remote Controller TC80-N3.
MSRP: 45.0

Remote Switch RS-60E3
Compact remote switch replicating all of the functions of the shutter release button.
MSRP: 30.0

Rubber Frame EF
MSRP: 10.0

SEMI HARD CASE EH19-L
Compatible with: Digital Rebel XSi, EOS Rebel T1i EF-S 18-55mm IS Kit, EOS Rebel XS 18-55IS Kit, EOS Rebel XS EF-S 18-55IS Refurbished, EOS Rebel XSi Refurbished (Body)
MSRP: 70.0

SEMI HARD CASE EH24-L
Compatible with: EOS Rebel T5i EF-S 18-55IS STM Kit, EOS Rebel T3i EF-S 18-55IS II Kit and EOS Rebel T3 Kit.
MSRP: 70.0

USB Cable IFC-200U
The Canon IFC-200U USB Interface Cable enables you to transfer your camera pictures to a computer fast. The cable connects to your camera and to the USB port on your PC or MAC Computer. Comes standard with the EOS 1Ds Mark III, 1D Mark IV, 1D Mark III, 5D Mark II, 7D, 60D, 50D, 40D, Rebel T2i, Rebel T1i, Rebel XSi and Rebel XS. Please see Compatibility tab for compatible models.
MSRP: 35.0

USB Cable IFC-500U
The Canon IFC-500U USB Interface Cable enables you to transfer your camera pictures to a computer fast. The cable connects to your camera and to the USB port on your PC or MAC Computer. Please see Compatibility tab for compatible models.
MSRP: 50.0

Video Cable AVC-DC400ST
Enables direct image display from the EOS to an HD television or a similar display device. Comes standard with the EOS 1D Mark IV, 7D, 60D, Rebel T3i and Rebel T2i. Please see Compatibility tab for compatible models.
MSRP: 25.0

Wide Strap EW-100DB IV
Wide strap for EOS Cameras.
MSRP: 20.0

Wide Strap EW-100DB V
Wide strap for EOS Rebel T6S
MSRP: 20.0

Zoom Pack 1000 Holster Case
Weather-Proof Exterior. Interior Padding for Cushioning. Front Zippered Accessory Pocket. Touch Fastened Closure. Shoulder Strap.
MSRP: 40.0
Software Developers Kit General Information
Current SDK Versions as of November 13, 2014
EDSDK 2.15 for EOS digital cameras
- What are the Canon Digital Camera SDKs?
- Do the Canon Digital Camera SDKs replace the software supplied with my Canon digital camera?
- Who is eligible to apply for a Canon Digital Camera SDK?
- Canon Digital Camera SDK Application Procedures & License Agreement
- Canon Digital Camera SDK Distribution Methods
- Canon Digital Camera SDK Technical Support, Bug Reports & Feature Requests
- Canon Digital Camera SDK Compatibility Charts
- Canon Digital Camera SDK Compatibility Charts, System Requirements & Support Applications
1. What are the Canon Digital Camera SDKs?
SDK stands for Software Development Kit. The SDKs for EOS Digital SLRs and PowerShot compact digital cameras are separate. There are two (2) current Canon Digital Camera SDK versions:
- EDSDK 2.15 Windows version for select EOS Digital SLRs
- EDSDK 2.15 Macintosh version for select EOS Digital SLRs
The Canon Digital Camera SDKs comprise a set of APIs, DLLs, and static link libraries that provide an interface for accessing Canon digital cameras and data generated by Canon digital cameras.
EDSDK 2.15 Windows and Macintosh version support remote control for some EOS cameras, RAW image conversion and downloading from select EOS Digital SLRs with DIGIC 4, DIGIC III or DIGIC II processors released over the past five years, starting with the EOS-1D Mark III and continuing through to the EOS-1D X.
All Canon Digital Camera SDK versions are written in C. There are no current ActiveX versions. The ONLY supported Operating Systems are Windows 7, 8, 8.1,Mac OS X 10.8 - 10.9.
PLEASE NOTE: EDSK is not 64-bit compatible. A 64-bit library is provided as part of the EDSDK, limited to the camera connect functions, as a beta version on a trial basis.
Furthermore, there is no explicit support for other operating systems or development environments including but not limited to: Windows 2000, Windows XP X64 Edition, Windows CE, Windows Mobile Edition, Windows Media Center, Linux, Sun, Unix, HP-Unix, OS/2, Free BSD, Java, Cocoa, etc. Canon Inc. has indicated no plans to develop SDKs for any of these operating systems or development environments.
Additional Notes on this release:
- 1.1 Built-in Wi-Fi transmitter of EOS 6D is not supported.
- 1.2 In the case of EOS M, remote shooting function is not supported.
- 1.3 From the previous version, it allows only to start/stop movie shooting. When using a 64-bit library, however, some low-end cameras do not display the live view image during movie shooting. Incidentally, the 64-bit library is available only on a trial basis same as the previous version.
2. Do the Canon Digital Camera SDKs replace the software supplied with my Canon digital camera?
The Digital Camera SDKs do not replace the software that was supplied with your Canon digital camera. If you have reached this page in error while looking for Canon digital camera software, please go to the following web page:
This page links to support pages for specific Canon digital cameras. On each digital camera support page, we provide a link to all Canon digital camera software available online for that model, including free updates for ZoomBrowser EX and ImageBrowser for customers who have installed earlier versions of these applications.
If you are a resident of the U.S. and you have misplaced or damaged your original software CD and wish to replace it, you may purchase the latest Canon Digital Camera Software Solutions disc for your camera through Canon USA's Customer Support Center at 1-800-OK-CANON (1-800-652-2666). Residents of other countries should contact their regional Canon customer support center for further assistance.
3. Who is eligible to apply for the Canon Digital Camera SDKs?
Software developers residing in North, Central and South America are eligible to apply for Canon Digital Camera SDKs through the Canon U.S.A., Inc. web site, i.e., this web site.
PLEASE NOTE: We are prohibited by Canon Inc. from distributing Digital Camera SDKs to developers residing outside our sales area. SDK applications received from developers residing outside our sales areas will be rejected.
European, African and Middle East-based developers are requested to register with Canon Europa at:
Australian and New Zealand-based developers are requested to contact Canon Australia at:
Developers based in India, Indonesia, Malaysia, Pakistan, the Philippines, Singapore and Thailand are requested to register with Canon Asia at:
Developers residing in countries other than those listed above are directed to contact their regional Canon office for information regarding SDK availability in their area.
4. Canon Digital Camera SDK Application Procedures & License Agreement
The SDK application form is available to you after you read and agree to the terms of the Canon Digital Camera SDK License Agreement. Please be sure to fill out all required fields in the online application form with complete and accurate data if you wish to receive the SDK.
When you submit an SDK application, you get a registration confirmation screen informing you that your SDK application has been received and that it will be reviewed as soon as possible. Upon approval, you will receive downloading instructions via e-mail. Typically, approvals are issued within 1 to 2 business days after receipt. If the SDK application is not approved, we will attempt to send you an explanation by e-mail. If your SDK application is approved, you will be asked to accept the terms of the Canon Digital Camera SDK License Agreement before being permitted to download the SDK. Additionally, each time a new SDK is released, it is necessary to resubmit the SDK application online in order to receive the latest version of the Canon Digital Camera SDK. This new application also enables us to notify you of new versions of the SDK as they are released.
5. Canon Digital Camera SDK Distribution Methods
Current Canon Digital Camera SDKs are available for download to approved developers at our password-protected web site. If you have any difficulty accessing our web page or downloading the SDK after your approval, please let us know and we will be happy to send you a copy on CD-ROM.
Occasionally, there have been instances where our SDK approval notifications have not been received because they were blocked by the recipient's e-mail spam filter. In such cases, we don't know about it unless it's reported. To ensure reception of your SDK approval notification, please register the following e-mail address in your e-mail system's list of approved contacts:
Developers who've experienced difficulties downloading the SDKs on the Windows platform through Microsoft's Internet Explorer browser have reported successful results with Firefox and Safari browsers.
6. Canon Digital Camera SDK Technical Support, Bug Reports & Feature Requests
Please note that as per the current SDK License Agreement, the Canon Digital Camera SDKs are offered as is, without technical support. However, the current SDKs are provided with written documentation as well as several tutorials and sample files.
Bug reports or new feature requests for the Canon Digital Camera SDKs should be submitted via e-mail to:
7. Canon Digital Camera SDK Compatibility Charts
Only the following cameras are supported:
- EOS-1D C / EOS 6D / EOS M / EOS M2 / EOS 7D Mark II(*)
- EOS-1D X / 1D Mark III / 1Ds Mark III / 1D Mark IV
- EOS 40D / 50D / 5D Mark II / 5D Mark III / 7D / 60D / 60Da / 70D
- EOS Rebel XSi / 450D
- EOS Rebel XS / 1000D
- EOS Rebel T1i / 500D
- EOS Rebel T2i / 550D
- EOS Rebel T3i / 600D
- EOS Rebel T4i / 650D
- EOS Rebel T3 / 1100D
- EOS Rebel T5i / 700D, EOS Rebel SL1 / 100D
- EOS Rebel T5 / 1200D / Hi
(*) Newly supported models
8. Canon Digital Camera SDK Development & Target Environments
SDK's Name: Canon EOS Digital SDK (EDSDK) v2.14 for Windows
System Requirements: Windows:
Pentium 1.3GHz or higher Pentium processor
At least 1GB RAM
USB 2.0
OS: Windows 7, 8, 8.1
OS: Mac OS X 10.8 - 10.9
Change from the previous version: Change from v2.14 To support EOS 7D Mark II